Riello 1Z90099/MTA
 |
 |
Close
Buy Riello 1Z90099/MTA
When you make a purchase through links on our site, we may earn an affiliate commission.
Riello 1Z90099/MTA | £501.99 |  | |||
Uninterruptible Power Supply System Interactive UPS Riello WMTA016091P0 S5 | £839.75 |  | |||
AccessoriesAll accessories for Riello 1Z90099/MTA →
EU PLUG.Multi Switch ATS guarantees power operating continuity.The usage of ATS guarantees higher reliability then a single UPS with a bypass.- Multi Switch ATS permits to power up to 8 x 10A IEC load or 1 x 16A IEC from 2 power supplies line (either from the grid or UPS).It is able to connect the loads to one of the 2 input lines and meanwhile to monitor the consumption.- Multi Switch ATS can switch-off each group of output power-plugs separately.- In case of load malfunctions (e.g.short-circuit) the Multi Switch ATS disconnects the plugs where the load is connected, avoiding to disconnect other loads.Operating principle:- Multi Switch ATS provides direct distribution of eight 10 A IEC consumers or one 16 A IEC consumer in a system with two input power lines (two mains inputs, or two UPS ).- Multi Switch ATS is able to connect to either of the two input power lines, whilst simultaneously monitoring the power uptake.Protection against load faults:- If one of the loads fails (e.g.short circuit), Multi Switch ATS disconnects the group of sockets where the load is connected, thus preventing other loads from being switched off (i.e.in the event of poor selectivity of the protection devices).Protection against power supply faults:- If one of the two power sources falls outside tolerance levels, Multi Switch ATS will transfer the consumers to the second power source (switching is instantaneous if the two sources are in phase).Features:- Full protection for consumers against mains and load failures.- Versatile to use:Multi Switch ATS can be powered with 2 different power supplies (2 UPS even of different sizes/types).- 19´´ cabinet installation.- Display panel.- Can be connected to PowerNetGuard supervision software.- No signal connection between the Multi Switch ATS and the power sources or consumers is necessary.- Compatible with PowerShield³ software.- Slot for communications boards.Specifications:Input:- Voltage:180-264 Vac (selectable).- Frequency:50/60 Hz Environmental:- Altitude max:3000 m.- Color Dark grey RAL:5004.- Communication:DB9 with RS232 and USB ports, slot for communications interface, relay contact port.- Protection rating:IP20.- Protections:Overcurrent.- overvoltage.- undervoltage.- protection against energy back-feed.- Noise:< 35 dBA.- Operating temperature:0 °C / +40 °C.- Relative humidity:
Product description is based on database from online stores. Be sure to verify all information directly with seller before purchasing.
Li-Ion or LiFePO4: What’s best for charging station and UPS?Understand the strengths and weaknesses of lithium batteries used in charging stations and UPS
What type of backup power supply is more profitable and cheaper?We understand the cost and efficiency of home backup power systems based on battery energy
How to place an order?How to add store?
Remember that online store is responsible for accuracy of information about price, warranty and delivery!
SimilarCompare using chart →
low voltage (router, camera), signal: sinewave, power: effective 54 W, battery: no battery, external battery connection
low voltage (router, camera), signal: sinewave, power: effective 18 W, battery: 10 Ah, sockets: USB A
low voltage (router, camera), power: effective 25 W, battery: 8.8 Ah, sockets: 1 x DC5521 9/12 H, USB A
low voltage (router, camera), signal: sinewave, power: effective 156 W, battery: no battery, external battery connection
low voltage (router, camera), signal: sinewave, power: effective 36 W, sockets: 1 x DC5525 12 H 3 A
standby, signal: sinewave, power: effective 360 W, sockets: type F (Schuko), with reserve 3, without reserve 3
standby, signal: sinewave, power: effective 300 W, battery: no battery, external battery connection, sockets: type F (Schuko), with reserve 1, USB A
low voltage (router, camera), wall, signal: sinewave, power: effective 240 W, battery: no battery, external battery connection
standby, signal: sinewave, battery: 7 Ah, batteries 2, sockets: type F (Schuko), with reserve 4
low voltage (router, camera), rack, signal: sinewave, power: effective 995 W, battery: no battery, sockets: 6 x DC SmartPower ports
