Momo Design Fgtr Classic Open Face Helmet 21184A7001-002-L

FGTR model is also available in Classic version, a reinterpretation of the first traditional FGTR icon model that maintains its stylish features.Features:- ABS demi jet shell in one size- Inner padding not removable.- High sweat absorption fabric and mesh fabric net with silver ion treatment for an effective bacteria-static action- Brushed metal screw- Anti-scratch Visor UV400 with support- Chinstrap with micrometric buckleUse and Maintenance:This helmet has been conceived and manufactured to protect your head in case of shock thanks to the shock absorption ability of the different materials used.Helmet That Has Suffered A Shock. Never Use Again A Helmet That Has Suffered A Shock:- A helmet that has suffered a shock must not be used any more. Sometimes damages are not visible from the outside however the internal materials may be damaged. The helmet is designed for shock absorption by alteration and partial destruction of some parts: in case of further shock it won´t be able to protect you with the maximum safety. Return your helmet to the manufacturer for an expert inspection or replace it with a new one.Proper Wearing:- Warning: Carefully select the size of your helmet as it is very important for your safety. Ask for your Authorized Dealer´s advice when choosing your helmet suitable size. In order to check your helmet proper size, follow the instruction in section (4). Never use a helmet that is too small or too big for your head.How To Check Your Size:- A safe helmet should close-fit your head. To check the size, wear your helmet and shake your head left/right and forward/back. Try to move it with your hands: if it slips it means it´s too big, therefore try a smaller size. If the pressure on your head bothers or hurts you, try a bigger size. You must then carry out the ´´ROLL-OFF TEST´´ (see figure B). Fasten your helmet. Hold onto the chin strap with one hand and using the other one try to take it off by strongly pulling from the back. If the helmet comes off the size is not correct. Check that you can turn your head freely and that your side view is not limited. Check that you can breath freely and that nothing obstructs the air flowing inside the helmet.Positioning:- Do not fasten your helmet if you have positioned it too much backwards (see figure A) and always wear it in the proper position (see figure B).Microlock´´ Retention System:- Your new helmet is equipped with the exclusive Microlock retention system, which is one of the most comfortable and modern system available today thanks to its micrometric regulation. In order to have the highest protection and to appreciate the advantages of the Microlock system, carefully read the instructions contained in this label. Put your new MOMODESIGN on, making sure the size is correct.Attach the Microlock by inserting the dented tongue in the buckle Fig A-B. Warning: do not twist the strap, the dented part of the tongue must be facing the outside of the helmet. Pull on the chin strap to