Dark mode
United Kingdom

Falco Misty 735-2108-38-808

Photos - Motorcycle Boots Falco Misty  735-2108-38-808
Falco Misty Motorcycle Boots 735-2108-38-808
from £140.00 up to £154.00 

Buy Falco Misty 735-2108-38-808

When you make a purchase through links on our site, we may receive a affiliate commission.

Falco Misty, boots waterproof women , color: Grey , size: 38 EU FA50406628-38

Misty is a ladies motorcycle boot in retro look. The integrated High-Tex® membrane is water- and windproof. Features High-Tex® membrane lacing, velcro and zipper Shaft height: approx. 15 cm heel height: approx. 5 cm Preformed, vibration-absorbing, orthopedic footbed Waterproof Windproof Breathable Made on women s last Safety ABS protectors incorpor... moreated in the ankle area Reinforced toe and heel protection Certified according to EN13634:2015 Material Upper: soft, full-grain cowhide leather Inner lining: polyester (mesh) Sole Oil resistant and non-slip rubber sole HIGH-TEX® membrane Falco membrane resistant to water penetration. The only scientific test to determine, define and indicate whether a motorcycle boot is waterproof is the test required by the regulations EN 13634: 2010. The testing method consists of a walk of 100 steps on a suitable platform with water level 5 mm above the sole. At the successful completion of this test, the boot is considered waterproof. ACF|women Craft const...
Motoin.de
Delivery: to United Kingdom
Report
£114.79

Falco Misty Motorcycle Boots 735-2108-38-808

Features:- Full-grain leather upper and High-Tex waterproof membrane.- Reinforced toe and heel. - ABS reinforced ankle cup inserts. - Laces and zipper combined closure. - High-heel rubber sole.Tehnology:High-Tex:Falco membrane resistant to water penetration. The only scientific test to determine, define and indicate whether a motorcycle boot is wat... moreerproof is the test required by the regulations EN 13634.The testing method consists that of the total wetted area inside the footwear shall be not greatedthan 3 cm2 when tested in accordance with either:- A walk of 100 steps on a suitable platform with water level of 30mm.- A toe-flexing machine test of 80 minutes with water level of 20 mm. above the featherline.- At the successful completiona of either this tests the boot is considered waterproof.CE:- CE branding on boots indicates the conformity of the product based on the European Directive 89/686/CEE and Regulation (EU) 2016/425. In particular this compliance has been verified and certified through CE certification and lab tests according to the corresponding norm EN 13634. European Standard EN 13634 includes two performance levels in terms of the protection afforded. Within standard EN 13634 Level 1 performance is deemed as the minimum level required, Level 2 offers increased performance.Levels confirm following tests compliances:- Height of the upper- Impact abrasion resistance- Impact cut resistance- Transverse rigidity of bottom
MotardINN
Delivery: in United Kingdom
Report
£139.99

Falco Misty Women's Boots, green, Size 38

Fc-moto.de
Delivery: to United Kingdom
Report
£153.98
Features:- Full-grain leather upper and High-Tex waterproof membrane.- Reinforced toe and heel. - ABS reinforced ankle cup inserts. - Laces and zipper combined closure. - High-heel rubber sole.Tehnology:High-Tex:Falco membrane resistant to water penetration. The only scientific test to determine, define and indicate whether a motorcycle boot is waterproof is the test required by the regulations EN 13634.The testing method consists that of the total wetted area inside the footwear shall be not greatedthan 3 cm2 when tested in accordance with either:- A walk of 100 steps on a suitable platform with water level of 30mm.- A toe-flexing machine test of 80 minutes with water level of 20 mm. above the featherline.- At the successful completiona of either this tests the boot is considered waterproof.CE:- CE branding on boots indicates the conformity of the product based on the European Directive 89/686/CEE and Regulation (EU) 2016/425. In particular this compliance has been verified and certified through CE certification and lab tests according to the corresponding norm EN 13634. European Standard EN 13634 includes two performance levels in terms of the protection afforded. Within standard EN 13634 Level 1 performance is deemed as the minimum level required, Level 2 offers increased performance.Levels confirm following tests compliances:- Height of the upper- Impact abrasion resistance- Impact cut resistance- Transverse rigidity of bottom
The product description is generated based on data from online stores. Before purchasing be sure to verify all information directly with the seller.

How to place an order?How to add store?
Remember that the online store is responsible for the accuracy of information regarding price, warranty, and delivery!