When you make a purchase through links on our site, we may receive a affiliate commission.
570 Dremel 3.2mm Rotary Tool Grout Removal Bit 570
Ideal for cleaning wall and floor grout or removing grout to replace broken tiles Use with the Dremel Grout Removal attachmen... moret 568 Accessory Length: 58mm Working Length: 10mm Maximum RPM: 20000 1/min Shank Diameter: 3.2mm Working Diameter: 3.2mm
This bit is used to remove the grout between tiles in e.g. Bathrooms or toilets. Ideal for replacing wall and floor grout or... moreremoving grout to replace broken tiles. The 569 grout bit tip is generally less than the distance between wall tiles (diameter of head: 1.6mm). The 570 is designed to get through floor grout and is smaller (diameter of head: 3.2mm). These bits are designed for small repair jobs. If you have a large removal requirement, you may need multiple bits to get through all of the grout. The angled attachment is designed so the bit is pulled gently through the grout – never pushed. Pushing will ruin the bit. There are two guide points on the attachment that will help keep the bit between the tiles. Use caution to avoid the bit touching the tile. This accessory is a solid carbide tip and it will nick the tile if it comes in contact with it while the tool is turned on. A slow feed rate through the grout is recommended with some attention in older homes to the metal spacers that may still remain in the grout being removed. To remove a greater depth of grout, start by removing the surface grout. Then adjust the guide to a greater depth and take a second pass. For corners you will need to remove the guide. Keep a steady hand and carefully pull the tool toward you.Materials to use on:- GroutRecommended speed:- 20.000 RPMTechnical details for Grout Removal Bits 1,6 mm:- Drywall/Plasterboard- Aerated ConcreteSpecifications:- Shank diameter: 3,2 mm- Working length: 10,0 mm- Accessory length: 58,0 mm- Maximum RPM: 20.000 1/min
The Dremel 570 Grout Removal Bit is a precision accessory designed for cleaning and removing grout from wall and floor tiles.... moreThis specialist bit delivers efficient grout removal, making it ideal for renovation work and tile replacement projects where damaged grout needs to be cleared without affecting surrounding tiles. Designed to work with the Dremel Grout Removal attachment 568, this bit provides controlled material removal in grout lines. The 3.2mm working diameter offers the right balance between precision and coverage for typical grout joints, allowing tradespeople and contractors to tackle both cleaning and full grout removal tasks with confidence. With a maximum operating speed of 20,000 RPM, the bit is engineered for use with Dremel rotary tools, providing the performance needed for effective grout work. Whether you're preparing surfaces for regrouting or removing grout around a single broken tile, this accessory helps complete grout removal tasks efficiently. Features and Benefits: • Compatible with Dremel Grout Removal attachment 568 for controlled operation • 3.2mm diameter suits standard grout joint widths • Suitable for both wall and floor tile applications Specifications: Shank diameter: 3.2mm Working diameter: 3.2mm Maximum RPM: 20,000 1/min
The Dremel 570 Grout Removal Bit is a precision accessory designed for cleaning and removing grout from wall and floor tiles.... moreThis specialist bit delivers efficient grout removal, making it ideal for renovation work and tile replacement projects where damaged grout needs to be cleared without affecting surrounding tiles. Designed to work with the Dremel Grout Removal attachment 568, this bit provides controlled material removal in grout lines. The 3.2mm working diameter offers the right balance between precision and coverage for typical grout joints, allowing tradespeople and contractors to tackle both cleaning and full grout removal tasks with confidence. With a maximum operating speed of 20,000 RPM, the bit is engineered for use with Dremel rotary tools, providing the performance needed for effective grout work. Whether you're preparing surfaces for regrouting or removing grout around a single broken tile, this accessory helps complete grout removal tasks efficiently. Features and Benefits: • Compatible with Dremel Grout Removal attachment 568 for controlled operation • 3.2mm diameter suits standard grout joint widths • Suitable for both wall and floor tile applications Specifications: Shank diameter: 3.2mm Working diameter: 3.2mm Maximum RPM: 20,000 1/min
The Dremel 570 Grout Removal Bit is a precision accessory designed for cleaning and removing grout from wall and floor tiles.... moreThis specialist bit delivers efficient grout removal, making it ideal for renovation work and tile replacement projects where damaged grout needs to be cleared without affecting surrounding tiles. Designed to work with the Dremel Grout Removal attachment 568, this bit provides controlled material removal in grout lines. The 3.2mm working diameter offers the right balance between precision and coverage for typical grout joints, allowing tradespeople and contractors to tackle both cleaning and full grout removal tasks with confidence. With a maximum operating speed of 20,000 RPM, the bit is engineered for use with Dremel rotary tools, providing the performance needed for effective grout work. Whether you're preparing surfaces for regrouting or removing grout around a single broken tile, this accessory helps complete grout removal tasks efficiently. Features and Benefits: • Compatible with Dremel Grout Removal attachment 568 for controlled operation • 3.2mm diameter suits standard grout joint widths • Suitable for both wall and floor tile applications Specifications: Shank diameter: 3.2mm Working diameter: 3.2mm Maximum RPM: 20,000 1/min
This bit is used to remove the grout between tiles in e.g. Bathrooms or toilets. Ideal for replacing wall and floor grout or removing grout to replace broken tiles. The 569 grout bit tip is generally less than the distance between wall tiles (diameter of head: 1.6mm). The 570 is designed to get through floor grout and is smaller (diameter of head: 3.2mm). These bits are designed for small repair jobs. If you have a large removal requirement, you may need multiple bits to get through all of the grout. The angled attachment is designed so the bit is pulled gently through the grout – never pushed. Pushing will ruin the bit. There are two guide points on the attachment that will help keep the bit between the tiles. Use caution to avoid the bit touching the tile. This accessory is a solid carbide tip and it will nick the tile if it comes in contact with it while the tool is turned on. A slow feed rate through the grout is recommended with some attention in older homes to the metal spacers that may still remain in the grout being removed. To remove a greater depth of grout, start by removing the surface grout. Then adjust the guide to a greater depth and take a second pass. For corners you will need to remove the guide. Keep a steady hand and carefully pull the tool toward you.Materials to use on:- GroutRecommended speed:- 20.000 RPMTechnical details for Grout Removal Bits 1,6 mm:- Drywall/Plasterboard- Aerated ConcreteSpecifications:- Shank diameter: 3,2 mm- Working length: 10,0 mm- Accessory length: 58,0 mm- Maximum RPM: 20.000 1/min
The product description is generated based on data from online stores. Before purchasing be sure to verify all information directly with the seller.
