Buy Rust Oleum Hard Hat Metal Spray Paint Traffic Red 500ml 2166
When you make a purchase through links on our site, we may earn an affiliate commission.
Rust Oleum Hard Hat Metal Spray Paint Traffic Red 500ml 2166
RUST-OLEUM® Hard Hat Aerosol Topcoats 2166 are based on a fast drying short oil soya alkyd. The products are based on lead- and chromate free pigments.Recommended Uses:Should be applied over RUST-OLEUM Hard Hat 2169/2182 Primers or properly prepared painted substrates. Intended for small maintenance jobs or for touch-up. Should be used in light ind... moreustrial exposures, normal humidity and interior applications. SpecificationsSize: 500 mlAppearance: High gloss, 2190 and 2178 are flat Colour: Traffic RedPropellant: Dimethyl ether Recommended film thickness: 25 µm dry, equals averagely 100 µm wet VOC-content: 640 - 650 g/l Drying times:20°C/50% r.v:To touch: 15 minutes To handle: 30 minutes To recoat: Within 1 hour or after 48 hours Full hardness 7 days Heat resistance: 100°C (dry heat), above 65°C discoloration may occurCoverage: Theoretical: 2.5 m² per spray can at 25 µm dry Practical: Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application.
Rust Oleum Hard Hat Metal Spray Paint Traffic Red 500ml 2166
RUST-OLEUM® Hard Hat Aerosol Topcoats 2166 are based on a fast drying short oil soya alkyd. The products are based on lead- and chromate free pigments.Recommended Uses:Should be applied over RUST-OLEUM Hard Hat 2169/2182 Primers or properly prepared painted substrates. Intended for small maintenance jobs or for touch-up. Should be used in light ind... moreustrial exposures, normal humidity and interior applications. SpecificationsSize: 500 mlAppearance: High gloss, 2190 and 2178 are flat Colour: Traffic RedPropellant: Dimethyl ether Recommended film thickness: 25 µm dry, equals averagely 100 µm wet VOC-content: 640 - 650 g/l Drying times:20°C/50% r.v:To touch: 15 minutes To handle: 30 minutes To recoat: Within 1 hour or after 48 hours Full hardness 7 days Heat resistance: 100°C (dry heat), above 65°C discoloration may occurCoverage: Theoretical: 2.5 m² per spray can at 25 µm dry Practical: Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application.
Build your rocket and carry out launches in total safety. Prepare your fuel with the ingredients supplied, fit the safety stopper and launch your rocket to heights of up to 15 metres! Specifications Rocket launching experiment Lauches to height of up to 15 metres Age: From 8 years old Warning : For children aged 8 and over only. Not suitable for c... morehildren under 36 months due to small parts wich can be ingested. Choking hazard. Adult Supervision required. Box dimensions: 29.00 x 07.00 x 26.50 cm Colour: Multi What's Included 1 rocket, safety plug, filter, 3 foam fins, 3 fin supports, double-sided adhesive strips, citric acid, sodium bicarbonate, measuring spoon, stirrer, funnel, bowl, stickers, poster, protective goggles.
Kenko 105 mm Digital Circular Polarising Filter for Camera 2166
Designed to remove unwanted reflections and glare from non-metallic surfaces such as water and glass
Slim Frame makes it ideal for use on wide-angles lenses
Optimised for use with digital cameras
Does not affect the overall colour balance of the image
Made in Japan
RUST-OLEUM® Hard Hat Aerosol Topcoats 2166 are based on a fast drying short oil soya alkyd. The products are based on lead- and chromate free pigments.Recommended Uses:Should be applied over RUST-OLEUM Hard Hat 2169/2182 Primers or properly prepared painted substrates. Intended for small maintenance jobs or for touch-up. Should be used in light industrial exposures, normal humidity and interior applications. SpecificationsSize: 500 mlAppearance: High gloss, 2190 and 2178 are flat Colour: Traffic RedPropellant: Dimethyl ether Recommended film thickness: 25 µm dry, equals averagely 100 µm wet VOC-content: 640 - 650 g/l Drying times:20°C/50% r.v:To touch: 15 minutes To handle: 30 minutes To recoat: Within 1 hour or after 48 hours Full hardness 7 days Heat resistance: 100°C (dry heat), above 65°C discoloration may occurCoverage: Theoretical: 2.5 m² per spray can at 25 µm dry Practical: Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application.
Product description is based on database from online stores. Be sure to verify all information directly with seller before purchasing.
This website uses cookies. Proceeding to use this website gives your consent for gathering and processing your data for analytic and marketing purposes.