Buy Rust Oleum Hard Hat Metal Spray Paint Grass Green 500ml 2138
When you make a purchase through links on our site, we may earn an affiliate commission.
Rust Oleum Hard Hat Metal Spray Paint Grass Green 500ml 2138
RUST-OLEUM® Hard Hat Aerosol Topcoats 2138 are based on a fast drying short oil soya alkyd. The products are based on lead- and chromate free pigments.Recommended Uses:Should be applied over RUST-OLEUM Hard Hat 2169/2182 Primers or properly prepared painted substrates. Intended for small maintenance jobs or for touch-up. Should be used in light ind... moreustrial exposures, normal humidity and interior applications. SpecificationsSize: 500 mlAppearance: High gloss, 2190 and 2178 are flat Colour: Grass GreenPropellant: Dimethyl ether Recommended film thickness: 25 µm dry, equals averagely 100 µm wet VOC-content: 640 - 650 g/l Drying times:20°C/50% r.v:To touch: 15 minutes To handle: 30 minutes To recoat: Within 1 hour or after 48 hours Full hardness 7 days Heat resistance: 100°C (dry heat), above 65°C discoloration may occurCoverage: Theoretical: 2.5 m² per spray can at 25 µm dry Practical: Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application.
RUST-OLEUM® Hard Hat Aerosol Topcoats 2138 are based on a fast drying short oil soya alkyd. The products are based on lead- and chromate free pigments.Recommended Uses:Should be applied over RUST-OLEUM Hard Hat 2169/2182 Primers or properly prepared painted substrates. Intended for small maintenance jobs or for touch-up. Should be used in light ind... moreustrial exposures, normal humidity and interior applications. SpecificationsSize: 500 mlAppearance: High gloss, 2190 and 2178 are flat Colour: Grass GreenPropellant: Dimethyl ether Recommended film thickness: 25 µm dry, equals averagely 100 µm wet VOC-content: 640 - 650 g/l Drying times:20°C/50% r.v:To touch: 15 minutes To handle: 30 minutes To recoat: Within 1 hour or after 48 hours Full hardness 7 days Heat resistance: 100°C (dry heat), above 65°C discoloration may occurCoverage: Theoretical: 2.5 m² per spray can at 25 µm dry Practical: Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application.
Buki France Dino Eggs Excavation Set - Pack Of 12 Eggs 2138
A set with 12 eggs to hollow out to unearth 12 different dinosaurs, including Tyrannosaurus rex, Brachiosaurus, Triceratops, Pteranodon and Spinosaurus and more. First of all, place the egg in water for 5 minutes, then, using the chisel, gently dig away at the plaster to reveal the dinosaur, use the brush to remove the remaining plaster and rinse t... morehe dinosaur with clean water. It comes with a colour poster that you can put up in your bedroom and a tray for mess free digging, 3 chisels and two brushes. Suits ages 8 years +. Features: A set with 12 eggs to hollow out to unearth 12 different dinosaurs The dinosaurs include Tyrannosaurus rex, Brachiosaurus, Triceratops, Pteranodon and Spinosaurus and more First of all, place the egg in water for 5 minutes Then, using the chisel, gently dig away the plaster to reveal the dinosaurs Then brush away any excess plaster Finally, rinse the dinosaurs with clean water Use the box for mess free digging Comes with a colour poster Specifications: Dimensions: H:25.4 x W:6.0 x D:24.7 cm Colour: Multi Material: Plastic, Plaster And Paper Model Number: 2138 Self Assembly Required: Yes
RUST-OLEUM® Hard Hat Aerosol Topcoats 2138 are based on a fast drying short oil soya alkyd. The products are based on lead- and chromate free pigments.Recommended Uses:Should be applied over RUST-OLEUM Hard Hat 2169/2182 Primers or properly prepared painted substrates. Intended for small maintenance jobs or for touch-up. Should be used in light industrial exposures, normal humidity and interior applications. SpecificationsSize: 500 mlAppearance: High gloss, 2190 and 2178 are flat Colour: Grass GreenPropellant: Dimethyl ether Recommended film thickness: 25 µm dry, equals averagely 100 µm wet VOC-content: 640 - 650 g/l Drying times:20°C/50% r.v:To touch: 15 minutes To handle: 30 minutes To recoat: Within 1 hour or after 48 hours Full hardness 7 days Heat resistance: 100°C (dry heat), above 65°C discoloration may occurCoverage: Theoretical: 2.5 m² per spray can at 25 µm dry Practical: Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application.
Product description is based on database from online stores. Be sure to verify all information directly with seller before purchasing.
This website uses cookies. Proceeding to use this website gives your consent for gathering and processing your data for analytic and marketing purposes.
