Buy Rust Oleum Hard Hat Metal Spray Paint Black Satin 500ml 2176
When you make a purchase through links on our site, we may earn an affiliate commission.
Rust Oleum Hard Hat Metal Spray Paint Black Satin 500ml 2176
RUST-OLEUM® Hard Hat Aerosol Topcoats 2176 are based on a fast drying short oil soya alkyd. The products are based on lead- a... morend chromate free pigments.Recommended Uses:Should be applied over RUST-OLEUM Hard Hat 2169/2182 Primers or properly prepared painted substrates. Intended for small maintenance jobs or for touch-up. Should be used in light industrial exposures, normal humidity and interior applications. SpecificationsSize: 500 mlAppearance: High gloss, 2190 and 2178 are flat Colour: Black SatinPropellant: Dimethyl ether Recommended film thickness: 25 µm dry, equals averagely 100 µm wet VOC-content: 640 - 650 g/l Drying times:20°C/50% r.v:To touch: 15 minutes To handle: 30 minutes To recoat: Within 1 hour or after 48 hours Full hardness 7 days Heat resistance: 100°C (dry heat), above 65°C discoloration may occurCoverage: Theoretical: 2.5 m² per spray can at 25 µm dry Practical: Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application.
RUST-OLEUM® Hard Hat Aerosol Topcoats 2176 are based on a fast drying short oil soya alkyd. The products are based on lead- a... morend chromate free pigments.Recommended Uses:Should be applied over RUST-OLEUM Hard Hat 2169/2182 Primers or properly prepared painted substrates. Intended for small maintenance jobs or for touch-up. Should be used in light industrial exposures, normal humidity and interior applications. SpecificationsSize: 500 mlAppearance: High gloss, 2190 and 2178 are flat Colour: Black SatinPropellant: Dimethyl ether Recommended film thickness: 25 µm dry, equals averagely 100 µm wet VOC-content: 640 - 650 g/l Drying times:20°C/50% r.v:To touch: 15 minutes To handle: 30 minutes To recoat: Within 1 hour or after 48 hours Full hardness 7 days Heat resistance: 100°C (dry heat), above 65°C discoloration may occurCoverage: Theoretical: 2.5 m² per spray can at 25 µm dry Practical: Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application.
Rustoleum - Hard Hat Topcoat Satin Black 2176 500ML
Industrial paint aerosols, for bare metal, wood and concrete. The tough flexible film resists chipping, cracking and peeling... moreand is heat-resistant up to 100°C. To be applied over Hard Hat 2169/2182 primers or properly prepared painted substrates. Hard Hat is intended for small maintenance jobs or for touch-up and should be used in light industrial exposures, normal humidity and interior applications. It is touch dry in 15 minutes and recoatable within 1 hour or after 48 hours.
This Hozelock Round Tap connector has been designed for round and oval spout taps, with a maximum diameter of 18mm. The fitti... moreng is sealed to the tap by tightening the stainless steel clip. This Round tap connector is compatible with all standard fittings. Features and Benefits • A rubber sealant securely fits around most round and oval taps for a leak free connection • Adjustable stainless steel clip for simple fitting • The universal male hose end connector is compatible with all standard fittings
This Hozelock Round Tap connector has been designed for round and oval spout taps, with a maximum diameter of 18mm. The fitti... moreng is sealed to the tap by tightening the stainless steel clip. This Round tap connector is compatible with all standard fittings. Features and Benefits • A rubber sealant securely fits around most round and oval taps for a leak free connection • Adjustable stainless steel clip for simple fitting • The universal male hose end connector is compatible with all standard fittings
RUST-OLEUM® Hard Hat Aerosol Topcoats 2176 are based on a fast drying short oil soya alkyd. The products are based on lead- and chromate free pigments.Recommended Uses:Should be applied over RUST-OLEUM Hard Hat 2169/2182 Primers or properly prepared painted substrates. Intended for small maintenance jobs or for touch-up. Should be used in light industrial exposures, normal humidity and interior applications. SpecificationsSize: 500 mlAppearance: High gloss, 2190 and 2178 are flat Colour: Black SatinPropellant: Dimethyl ether Recommended film thickness: 25 µm dry, equals averagely 100 µm wet VOC-content: 640 - 650 g/l Drying times:20°C/50% r.v:To touch: 15 minutes To handle: 30 minutes To recoat: Within 1 hour or after 48 hours Full hardness 7 days Heat resistance: 100°C (dry heat), above 65°C discoloration may occurCoverage: Theoretical: 2.5 m² per spray can at 25 µm dry Practical: Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application.
Product description is based on database from online stores. Be sure to verify all information directly with seller before purchasing.
This website uses cookies. Proceeding to use this website gives your consent for gathering and processing your data for analytic and marketing purposes.
