United Kingdom

Rust Oleum Hard Hat Fluorescent Spray Paint Orange 500ml 2255

Photos - Paint / Enamel Rust Oleum Hard Hat Fluorescent Spray Paint Orange 500ml 2255
Rust Oleum Hard Hat Fluorescent Spray Paint Orange 500ml 2255
from £21.00 

Buy Rust Oleum Hard Hat Fluorescent Spray Paint Orange 500ml 2255

When you make a purchase through links on our site, we may earn an affiliate commission.

Rust Oleum Hard Hat Fluorescent Spray Paint Orange 500ml 2255

RUST-OLEUM® Hard Hat Aerosols Fluorescent Topcoats 2200 Series are based on a fast drying acrylic resin. The products are based on special fluorescent pigments and are lead- and chromate free.Recommended Uses:Should be applied over RUST-OLEUM Hard Hat 2190 Flat White; for exterior applications it is recommended to recoat Fluorescent Topcoats 2200 w... moreith RUST-OLEUM Hard Hat 2500 Clear. Intended for safety marking or signalling. Should be used in light industrial exposures, normal humidity and interior applications. Specifications:Size: 500 mlAppearance: Flat/fluorescent Colour: Fluorescent OrangePropellant: Dimethyl ether Recommended film thickness: 25 µm dry, equals averagely 100 µm wet VOC-content: 653 g/l Drying times 20°C/50% r.v. To touch: 15 minutes To handle: 30 minutes To recoat: After 1 hour Full hardness 3 days Heat resistance: 100°C (dry heat) Coverage: Theoretical: 2.1 m² per spray can at 25 µm dry Practical: Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application.
Tooled-up.com
Delivery: to United Kingdom
Report
£20.95

Rust Oleum Hard Hat Fluorescent Spray Paint Orange 500ml 2255

RUST-OLEUM® Hard Hat Aerosols Fluorescent Topcoats 2200 Series are based on a fast drying acrylic resin. The products are based on special fluorescent pigments and are lead- and chromate free.Recommended Uses:Should be applied over RUST-OLEUM Hard Hat 2190 Flat White; for exterior applications it is recommended to recoat Fluorescent Topcoats 2200 w... moreith RUST-OLEUM Hard Hat 2500 Clear. Intended for safety marking or signalling. Should be used in light industrial exposures, normal humidity and interior applications. Specifications:Size: 500 mlAppearance: Flat/fluorescent Colour: Fluorescent OrangePropellant: Dimethyl ether Recommended film thickness: 25 µm dry, equals averagely 100 µm wet VOC-content: 653 g/l Drying times 20°C/50% r.v. To touch: 15 minutes To handle: 30 minutes To recoat: After 1 hour Full hardness 3 days Heat resistance: 100°C (dry heat) Coverage: Theoretical: 2.1 m² per spray can at 25 µm dry Practical: Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application.
Mytoolshed.co.uk
Delivery: in United Kingdom
Report
£20.95

Ernie Ball Classic Extra Slinky 2255 Guitar Strings 8-38

Made from pure nickel wire wrapped around tin plated hex shaped steel core wire. These guitar strings produce a warm rich tone. Ernie Ball is the pioneer of Rock and Roll guitar strings.
Gear4Music.com
Delivery: in United Kingdom
Report
£10.99

Konus 7x50 Sporty Fixed Focus Binoculars 2255

7x magnification 50mm objective lens Ruby coated optics cuts glare Rubber armored International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.
Amazon.co.uk
Delivery: to United Kingdom
Report
£84.10
RUST-OLEUM® Hard Hat Aerosols Fluorescent Topcoats 2200 Series are based on a fast drying acrylic resin. The products are based on special fluorescent pigments and are lead- and chromate free.Recommended Uses:Should be applied over RUST-OLEUM Hard Hat 2190 Flat White; for exterior applications it is recommended to recoat Fluorescent Topcoats 2200 with RUST-OLEUM Hard Hat 2500 Clear. Intended for safety marking or signalling. Should be used in light industrial exposures, normal humidity and interior applications. Specifications:Size: 500 mlAppearance: Flat/fluorescent Colour: Fluorescent OrangePropellant: Dimethyl ether Recommended film thickness: 25 µm dry, equals averagely 100 µm wet VOC-content: 653 g/l Drying times 20°C/50% r.v. To touch: 15 minutes To handle: 30 minutes To recoat: After 1 hour Full hardness 3 days Heat resistance: 100°C (dry heat) Coverage: Theoretical: 2.1 m² per spray can at 25 µm dry Practical: Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application.
Product description is based on database from online stores. Be sure to verify all information directly with seller before purchasing.

How to place an order?How to add store?
Remember that online store is responsible for accuracy of information about price, warranty and delivery!
Filters