Rust Oleum CombiPrimer Anti Rust Metal Primer Paint 3380.2.5
RUST-OLEUM® CombiPrimer Anti-Corrosion 3380 Grey are fast drying primers based on an aromatic free short oil alkyd resin. The... moreproducts contain rust-inhibitive pigments and are lead- and chromate free. Recommended Uses:RUST-OLEUM CombiPrimer should be used on new or rusted steel surfaces to provide and enhance protection against corrosion. CombiPrimer Anti-Corrosion is primarily intended for brush application and can also be applied by roller and air spray. CombiPrimer Anti-Corrosion should be used in general industrial exposures, normal humidity and interior applications and should be recoated with CombiColor Metal 7300. SpecificationsSize: 2.5 litreAppearance: Flat Colour: GreyDensity: 1.21 kg/ltr. Solids Content: 44.8% by volume Viscosity: 85 - 90 KU /Krebs Stormer Units at 20°C Recommended film thickness: 35 µm dry, equals 80 µm wet VOC-content: 424 g/l max. Ready-to-use mixture: 490 g/l max. Category: A/i EU Limit values: 600 g/l (2007) / 500 g/l (2010) Drying times:20°C/50% r.h. - To touch: 1 hour / To handle: 2 hour / To recoat: After 2 hours / Full hardness: 7 days 10°C/60% r.h. - To touch: 2 hours / To handle: 4 hours / To recoat: After 4 hours / Full hardness: 14 days 30°C/50% r.h. - To touch: 30 mins / To handle: 1 hour / To recoat: After 1 hour / Full hardness: 5 days Heat resistance: 120°C (dry heat) Coverage: Theoretical: 12.8 m²/l at 35 µm dry Practical: Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application.
Rust Oleum CombiPrimer Anti Rust Metal Primer Paint Grey 2.5l 3380.2.5
RUST-OLEUM® CombiPrimer Anti-Corrosion 3380 Grey are fast drying primers based on an aromatic free short oil alkyd resin. The... moreproducts contain rust-inhibitive pigments and are lead- and chromate free. Recommended Uses:RUST-OLEUM CombiPrimer should be used on new or rusted steel surfaces to provide and enhance protection against corrosion. CombiPrimer Anti-Corrosion is primarily intended for brush application and can also be applied by roller and air spray. CombiPrimer Anti-Corrosion should be used in general industrial exposures, normal humidity and interior applications and should be recoated with CombiColor Metal 7300. SpecificationsSize: 2.5 litreAppearance: Flat Colour: GreyDensity: 1.21 kg/ltr. Solids Content: 44.8% by volume Viscosity: 85 - 90 KU /Krebs Stormer Units at 20°C Recommended film thickness: 35 µm dry, equals 80 µm wet VOC-content: 424 g/l max. Ready-to-use mixture: 490 g/l max. Category: A/i EU Limit values: 600 g/l (2007) / 500 g/l (2010) Drying times:20°C/50% r.h. - To touch: 1 hour / To handle: 2 hour / To recoat: After 2 hours / Full hardness: 7 days 10°C/60% r.h. - To touch: 2 hours / To handle: 4 hours / To recoat: After 4 hours / Full hardness: 14 days 30°C/50% r.h. - To touch: 30 mins / To handle: 1 hour / To recoat: After 1 hour / Full hardness: 5 days Heat resistance: 120°C (dry heat) Coverage: Theoretical: 12.8 m²/l at 35 µm dry Practical: Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application.
RUST-OLEUM® CombiPrimer Anti-Corrosion 3380 Grey are fast drying primers based on an aromatic free short oil alkyd resin. The... moreproducts contain rust-inhibitive pigments and are lead- and chromate free. Recommended Uses:RUST-OLEUM CombiPrimer should be used on new or rusted steel surfaces to provide and enhance protection against corrosion. CombiPrimer Anti-Corrosion is primarily intended for brush application and can also be applied by roller and air spray. CombiPrimer Anti-Corrosion should be used in general industrial exposures, normal humidity and interior applications and should be recoated with CombiColor Metal 7300. SpecificationsSize: 2.5 litreAppearance: Flat Colour: GreyDensity: 1.21 kg/ltr. Solids Content: 44.8% by volume Viscosity: 85 - 90 KU /Krebs Stormer Units at 20°C Recommended film thickness: 35 µm dry, equals 80 µm wet VOC-content: 424 g/l max. Ready-to-use mixture: 490 g/l max. Category: A/i EU Limit values: 600 g/l (2007) / 500 g/l (2010) Drying times:20°C/50% r.h. - To touch: 1 hour / To handle: 2 hour / To recoat: After 2 hours / Full hardness: 7 days 10°C/60% r.h. - To touch: 2 hours / To handle: 4 hours / To recoat: After 4 hours / Full hardness: 14 days 30°C/50% r.h. - To touch: 30 mins / To handle: 1 hour / To recoat: After 1 hour / Full hardness: 5 days Heat resistance: 120°C (dry heat) Coverage: Theoretical: 12.8 m²/l at 35 µm dry Practical: Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application.
High quality anti-rust primer for the CombiColor system, use on bare or manually derusted steel surfaces to provide and enhan... morece protection against corrosion. Recoatable after 2 hours (at 20°C).
RUST-OLEUM® CombiPrimer Anti-Corrosion 3380 Grey are fast drying primers based on an aromatic free short oil alkyd resin. The products contain rust-inhibitive pigments and are lead- and chromate free. Recommended Uses:RUST-OLEUM CombiPrimer should be used on new or rusted steel surfaces to provide and enhance protection against corrosion. CombiPrimer Anti-Corrosion is primarily intended for brush application and can also be applied by roller and air spray. CombiPrimer Anti-Corrosion should be used in general industrial exposures, normal humidity and interior applications and should be recoated with CombiColor Metal 7300. SpecificationsSize: 2.5 litreAppearance: Flat Colour: GreyDensity: 1.21 kg/ltr. Solids Content: 44.8% by volume Viscosity: 85 - 90 KU /Krebs Stormer Units at 20°C Recommended film thickness: 35 µm dry, equals 80 µm wet VOC-content: 424 g/l max. Ready-to-use mixture: 490 g/l max. Category: A/i EU Limit values: 600 g/l (2007) / 500 g/l (2010) Drying times:20°C/50% r.h. - To touch: 1 hour / To handle: 2 hour / To recoat: After 2 hours / Full hardness: 7 days 10°C/60% r.h. - To touch: 2 hours / To handle: 4 hours / To recoat: After 4 hours / Full hardness: 14 days 30°C/50% r.h. - To touch: 30 mins / To handle: 1 hour / To recoat: After 1 hour / Full hardness: 5 days Heat resistance: 120°C (dry heat) Coverage: Theoretical: 12.8 m²/l at 35 µm dry Practical: Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application.
The product description is generated based on data from online stores. Before purchasing be sure to verify all information directly with the seller.
