Streacom DA2S V2 Mini-ITX Case - Silver ST-DA2S-V2

The Streacom DA2 V2 is the next interation of Streamcom's popular Small Form Factor (SFF) case. Specific improvements include a redesign of the ventilation inlets, with the goal of improving overall cooling. However it does share the flexible interior of its predacessor can accommodate a range of high-performance hardware.The Streacom DA2 V2 Mini-ITX Case at a Glance:Extremely compact SFF caseMade of sandblasted aluminiumUnique 'bracket' interior allowing for almost modular interior layoutSupports dual-slot gaming graphics cards up to 33 cm in lengthSpace for powerful ATX or SFX power suppliesUp to 6x 2.5″ or 3x 3.5″ drivesThe Streacom DA2 V2 Mini-ITX Case at a Glance:Despite its extremely compact dimensions, the Streacom DA2 V2 can hold an entire high-performance gaming PC. This is due to a truly innovative design. Attached to the case’s frame are rails which feature ‘brackets’, in the form of narrow struts, that hardware can be mounted to.As a result you have tremendous freedom regard where you position the motherboard, graphics card and radiator. In addition, the rear wall - and thus the orientation of the motherboard - can be rotated 180 degrees to create distinct layouts.Efficient Air and Water CoolingDue to the versatile mounting brackets, a variety of cooling layouts are possible. A 92 mm fan can be mounted to the rear wall, while the DA2 V2 can accommodate fans with a maximum width of 130 mm under the roof and 180 mm at the sides. The total number of fans is variable and depends on your choice of components. CPU coolers can be 145 mm tall. A 280 mm radiator can be attached to either the left or the right side. The brackets can also be used to attach a pump and a reservoir.The case is equipped with removable dust filters< underneath the roof and bottom, as well as one of the side panels to keep the interior of the Streacom DA2 V2 clean. Large areas on both side panels are covered with ventilation inlets. This is a notable improvement over its predecessor.Supports Full-length High-end Graphics CardsThe motherboard is mounted to sliding brackets, so that you can easily change its position. The Streacom DA2 V2 supports both Mini-ITX and Mini-DTX form factor motherboards. The power supply unit is installed internally and the power connection is routed to the rear of the case via an extension cable.The PSU bracket can be used for ATX, SFX and SFX-L power supplies. When using an ATX power supply, the maximum length of the graphics card is reduced to 220 mm, while with an SFX or SFX-L power supply the graphics card can be up to 33 cm in length. A total of three 3.5-inch or even six 2.5-inch drives can be installed.Aesthetic DesignThe Streacom DA2 V2 features a simple but elegant design with sandblasted aluminium with just the power button and one USB 3.0 type-C port on the front of the PC case.Specification:Dimensions: 180 x 286 x 340 mm (W x H x D)Material: aluminium (anodized, sandblasted), steelWeight: 3.9