Victron Energy Phoenix 12/50 Charger NT-360 (2+1)

Phoenix 12/50 2+1 Battery Charger 120-240V.The Victron Energy Phoenix 12/50 2+1 120-240V Battery Charger features a customisable battery management system.It is controlled by a microprocessor that can be configured for different battery types.Its adaptive functions will automatically optimise the process based on battery usage.Variable charging system with 4 stages:bulk - absorption - float - storage.The right amount of charge:variable absorption time.When the discharge is low, the absorption charging phase is shortened to avoid overcharging the battery.After a deep discharge, the absorption charging time is automatically increased to ensure that the battery is fully recharged.Preventing damage caused by over-gassing:BatterySafe mode.If, in order to charge a battery quickly, a combination of high charge current and high absorption voltage has been chosen, the Phoenix charger will prevent damage from over-gassing by automatically limiting the rate of voltage increase once the gassing voltage has been reached.Reduced ageing and maintenance when the battery is not in use:Storage mode.The storage mode is activated when the battery has not been discharged for 24 hours.In storage mode, the float voltage is reduced to 2.2 V/cell (13.2 V for 12 V batteries) to reduce gassing and corrosion of the positive plates.Once a week, the voltage is brought back up to absorption level to ´´equalise´´ the battery.This function prevents electrolyte stratification and sulphation, the main causes of battery failure.For longer battery life:temperature compensation.All Phoenix Chargers come with a battery temperature sensor.When connected, the charging voltage will automatically decrease as the battery temperature rises.This function is especially recommended for sealed batteries and/or when large temperature fluctuations are expected in the battery.Battery voltage sensor.To compensate for voltage losses due to cable resistance, Phoenix chargers have a voltage probe function so that the battery always receives the correct charging voltage.Universal input voltage range:90-265V AC and also suitable for DC supply.The chargers will accept 90-400V DC supply.