Victron Energy Skylla Tg 24/100 Charger NT-364 (1+1)

A charger Skylla-TG and output full rated output 4 amps.The charging voltage can be adjusted accurately to suit any battery system.The input for the charger is 230V 50 / 60HZ.The charge voltage can be directly measured at the terminals of the battery to compensate for the voltage loss due to resistance of the cable.An external sensor to measure the battery temperature and the charging voltage to compensate accordingly.Skylla TG 24/100 Battery Charger (1+1).Perfect chargers for all types of batteries.Skylla TG chargers are lightweight and compact thanks to high-frequency technology.The charging voltage can be precisely adjusted to suit all types of batteries, open or sealed.Sealed, maintenance-free batteries require particularly precise charging for a good service life.Any overvoltage will cause excessive gassing followed by drying out and premature malfunction.3-stage regulated charging.The three charging stages of the Skylla TG chargers are precisely controlled by microprocessor.The IUoUo charging curve guarantees the fastest and safest charging for all battery types.The absorption time is adjustable by means of a switch.The ´´Intelligent Startup´´ function avoids starting a full charge cycle on an already charged battery.Usable as a power supply.Their perfectly stabilised output voltage allows the Skylla TG chargers to be used as a power source without the use of batteries.Two outputs for charging 2 battery banks (24V models only).All TG chargers have 2 isolated outputs.The second output, intended for maintenance charging of a starter or auxiliary battery, is limited to 4 amps at a slightly lower voltage.For a longer battery lifetime:temperature compensation.All Skylla TG chargers are equipped with a battery temperature sensor to automatically reduce the charging voltage when the battery temperature rises.This function is essential to avoid overcharging maintenance-free batteries.Battery voltage sensor.To further improve the charging quality, a direct voltage measurement device at the battery terminals compensates for voltage losses in the main wiring.