Bosch GBH 2-28 Professional 0611267561

Faithfull Impact Rated Flat Bits are designed to perform fast, clean cuts, will bore all types of timber and are equally efficient when drilling with or against the grain. All bits have a precision gr more→ound point and cutting surfaces with extended spurs for faster cutting. All sizes except the 6mm, have a non-slip hexagonal shank with a locking mechanism compatible with adaptors or chucks with a built-in quick-release feature. A 300mm extension shank is available for use with flat bits of 16mm and above, for deep drill applications. Ideal for use with both mains or cordless drills. Made to DIN 3126 quality with 1/4in hexagonal non-slip shaft.Diameter: 13 mm Overall Length: 152 mmAdditional Information:• …

A120 - HSS General Purpose Stub Drills For general machining applications. Use in portable drills, turrets and automotic lathes. Special split-point ensures easy starting and accurate drill location. more→135 point angle (1181.00~2.90mm & over 13.00mm). Manufactured to DIN1897.

Lasts up to 3x longer than a standard drill bit - Drilling through reinforced concrete is a tough job, and it has traditionally taken its toll on drill bits. Regular two-cutter bits get stuck in rebar more→and they eventually break. The Full Carbide Head on the EXPERT SDS plus-7X is an advanced 4-cutter design made from a single piece of the toughest metal: It doesn’t jam and presents no weakness on impact. Thanks to Bosch Carbide Technology and the Full Carbide Head, the EXPERT SDS plus-7X lasts far longer than regular hammer drill bits. It punches through rebar effectively so there is no need to stop, re-target or change bits when you strike steel. For construction professionals drilling concrete an…

Durability in Concrete - The SDS plus-3 Drill Bit offers durability when drilling in concrete. To prevent heat development, the 4-flute dura design provides effective dust removal for increased endura more→nce. It is made of high-alloy steel, which is produced with an optimised hardening technology to withstand wear. For additional resistance, indented cutting edges are made from an ideal Bosch-controlled carbide blend. The bit is intended for work on concrete and masonry and is to be used with rotary hammers with SDS plus holders. As proof of quality, the drill bit bears the test mark of the PGM Masonry Drill Bit Association Board, guaranteeing compliance with tight tolerances, exact drilling and …

Osborn Goldex 81505 series jobber drill bits. Suitable for drilling stainless steels and other difficult to cut materials. Features & Benefits • DIN 338 • HSS-E (High Speed Steel, 5% Cobalt) more→• 135° point angle • 33° helix angle Specifications • Diameter: 8.1mm • Length: 75mm • Quantity: 5 • Drill Body Tolerance: h8

From pre-match warm-up to final whistle, this adidas Tiro 24 match jersey is built to support your game.Made for athletes in motion, it keeps you comfortable thanks to its moisture-wicking AEROREADY.T more→hose floating 3-Stripes on the shoulders and that embroidered 3 Bar Logo add the perfect football finish to your look.This product is made with 100% recycled materials.By reusing materials that have already been created, we help to reduce waste and our reliance on finite resources and reduce the footprint of the products we make.FEATURES:-Slim fit.-Ribbed crewneck.-100% recycled polyester interlock.-AEROREADY.-Droptail hem.

The DeWalt SDS Max Steel Flat Chisels are made from toughened steel which ensures tough bits. They also feature micro-processor controlled heat treatment for consistently tough, long-life and have a f more→lat end. Features & Benefits • Wide range of product offerings for the most common concrete demolition jobs • Specially toughened steel and micro-processor controlled heat treatment ensures consistent tough bits with long life Specifications • Width: 25mm • Length: 400mm • Shank: SDS Max • Pack Quantity: 1

The XLR range of points and chisels features a shaft of shock resistant steel to prevent breakage with a wear resistant tip to maintain sharpness. Features & Benefits • For heavy duty chiselling, more→channelling and demolition tasks in concrete/rebar and hard stone • Fully hardened steel point/chisel face for high wear resistance and increased productivity • The special 'Stay Sharp' chisel tip ensures a long-lasting sharpness of the chisel and thus an extended durability • High durability shock resistant steel minimises breakage Specifications • Width: 25mm • Length: 300mm • Shank: SDS Max • Pack Quantity: 1

Chisel Point / SDS Max / Total Length 280 mm / 10 Pieces

Easy Mortar Removal - The SDS plus Carbide-Tipped Pointing Chisel provides easy mortar removal and offers an extended product life due to the tungsten carbide-tipped blade. The chisel is intended for more→use in mortar and brick, plaster removal and repointing of bricks. It is compatible with an SDS plus chisel attachment or it can be used directly in SDS plus hammers with a rotation stop. Fits all SDS plus rotary hammer drills. Features and Benefits • Easy Mortar Removal with Extremely Long Lifetime • SDS plus Carbide-Tipped Pointing Chisel provides easy mortar removal with an extremely long lifetime • Tungsten carbide-tipped blade offers added robustness for an extended product …

Driving Earth Rods - The Earth Rod Driver is ideal for driving rods into the earth for lightning conductors or tent anchors. This product is intended for use in soil and the ground. It is compatible w more→ith TE-S system. The Earth Rod Driver can be used for placing rods and rings with up to 1-inch (25.4 mm) head diameter. With 28 mm hex shank for breakers. Features and Benefits • Driving Earth Rods for Lightning Conductors or Tent Anchors • Earth Rod Driver is ideal for driving earth rods for lightning conductors or tent anchors Specifications Total length: 300mm Shank, shape: Hexagon Shank type: Hexagon

The DeWalt SDS Max Steel Flat Chisels are made from toughened steel which ensures tough bits. They also feature micro-processor controlled heat treatment for consistently tough, long-life and have a f more→lat end. Features & Benefits • Wide range of product offerings for the most common concrete demolition jobs • Specially toughened steel and micro-processor controlled heat treatment ensures consistent tough bits with long life Specifications • Width: 25mm • Length: 300mm • Shank: SDS Max • Pack Quantity: 1