Bosch GFF 22 A Professional 0601620003
Diamond Core Bits & Milling Cutters950
 |
Template thickness should be at least 5mm thicker than cutter cut length of cutter. Approximately 1.0mm flat will be found on the nose. Specifications • Shank Diameter: 1/4 • Dia Metric: more→12.7 • Dia Imperial: 1/2 • Cut Length Metric: 12.7 • Cut Length Imperial: 1/2 • Overall Length Metric: 63.31 • Bearing Dia Metric: 12.7 • Bearing Dia Imperial: 1/2 • Angle: 45
 |
Eccentric single flute cutters. Cutters are chosen for fast free cutting, when cutting speed takes preference over finish. Cutters with prefix S are Solid Carbide. Small diameter tools must be h more→andled with care to avoid breakage. Single flute cutters should not be used in eccentric chucks. Specifications • Shank Diameter: 1/4 • Dia Metric: 2.7 • Dia Imperial: 7/64 • Cut Length Metric: 8 • Overall Length Metric: 48
 |
Crafted from solid carbide, it offers exceptional hardness and wear resistance, making it suitable for milling a wide range of materials including stainless steel, cast steel, cast aluminium, and copp more→er. The TiALN (Titanium Aluminium Nitride) coating enhances the end mill's performance by reducing friction and heat, allowing for faster cutting speeds and extended tool life. The Weldon shank design provides increased stability and secure grip in tool holders, ensuring precise and efficient milling operations. Product Operations • Shallow shoulder milling • Deep shoulder milling • Plunge milling • Shallow slot milling • Ramping • Progressive Plunging Features & Benefits …
 |
Two flute mini-trim with guide bearing will profile intricate shapes. Max. 2.0mm trimming. Ideal for acrylic trimming. Specifications • Shank Diameter: 1/4 • Dia Metric: 6.3 • Dia I more→mperial: 1/4 • Cut Length Metric: 25.4 • Cut Length Imperial: 1 • Overall Length Metric: 75 • Bearing Dia Metric: 6.3 • Bearing Dia Imperial: 1/4
 |
TCT cutter with staggered cutting surfaces. Deep mortising and grooving giving good chip clearance. For lock mortising, two width cuts will be needed to achieve the standard 19mm mortise. Will plun more→ge and clear chips to a depth of 70mm in a number of passes. Take several passes to avoid cutter breakage and motor overload. Specifications • Shank Diameter: 1/2 • Dia Metric: 16 • Dia Imperial: 5/8 • Cut Length Metric: 50 • Cut Length Imperial: 2 • Overall Length Metric: 101
 |
Ideally suited for cutting radiused edges at speed, as a side fence can be dispensed with. The guide bearing follows the vertical edge or template. Alternative bearing Ref. B127A creates a shallow ra more→dius. Specifications • Shank Diameter: 1/4 • Dia Metric: 25.3 • Cut Length Metric: 14.3 • Cut Length Imperial: 9/16 • Overall Length Metric: 64 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 7.9 • Radius 1 Imperial: 5/16
 |
Trend Craft Pro 1/4in shank Intumescent strip cutter - 10mm width Two Flute Carbide tips. Cuts the perfect sized slot into door edges and door frames for fast, perfectly flush fitting of intumescent more→strip. Bearing guide ensures the correct 4mm depth and 10mm width is always achieved to meet Fire Regulations. 1/4in shank, ideal for easy control with smaller routers. Position of groove can be altered with the router plunge for correct setting for 30 minutes fire and smoke protection. PTFE coating to minimise heat and resin build up for increased cutter performance and longevity. 1/4in shank for easy control in smaller routers with 'K'mark shank to ensure safe working practices. Specifications …
 |
This Trend Craft Pro 1/4in shank Bearing Guided Rebater router cutter has a 35mm diameter and two flute carbide tips for cleaner cutting edges and fast clearance of waste in all timber and timber-ba more→sed materials.It has a bottom bearing guide for cutting rebates on curved and straight work with accuracy and ease.This cutter is supplied with two bearings for 11.1 and 12.7mm wide rebates for glazing and panel work. It has PTFE coating to minimise heat and resin build up for increased cutter performance and longevity. The 1/4in shank gives easy control in smaller routers with 'K' mark shank to ensure safe working practices.Speci
Important!
Compatibility with specific models Routers & Trimmers should be confirmed with the online store manager directly before purchase.
Compatibility with specific models Routers & Trimmers should be confirmed with the online store manager directly before purchase.
