Bosch GWS 17-125 S Professional 06017D0300
Cutting Discs251
 |
FEATURES:- For X-LOCK angle grinders- Robust steel body with diamond cutting edge for long life a constant cutting depth- Does not splinter even if accidentally dropped- It produces no chemical odor o more→r additional dust during cutting- Designed for cutting metals such as steel, cast iron, stainless steel and copper- Diamond metal discs also fit on standard angle grinders- Diameter: 125 mm- Bore hole diameter: 22.23 mm
 |
Bevels tubes as they cut and lasts longer than conventional cutting wheels.Features
 |
The Tiles Used In Modern Construction Are Often Large, Very Hard And Expensive. Cutting Them To A High Standard Every Time Is Therefore Crucial Yet Difficult. The Expert Hardceramic Tile-Cutting Disc more→Uses Diamond Technology And A Range Of Design Features To Deliver The Best Results Consistently, Even In The Hardest Ceramics. The Bosch Expert Hardceramic X-Lock Diamond Tile Cutting Disc Offers The Best Cut In Hard Tiles. You Can Be Confident Of Achieving A Professional Finish On Every Job With This Diamond Cutting Disc.Features: - Clean, High Quality Cutting With Bosch Diamond Technology.- Chip-Free Cut With Purpose-Designe
 |
The Makita Ultra Thin Metal Cutting Disc is a high quality stainless steel cutting disk with an extra thin kerf. Desiged for cutting stainless steel the disk will give a perfect cutting finish everyti more→me. Specifications • Blade Diameter: 125mm • Bore Size: 22.23mm • Thickness: 1.2mm Features and Benefits • Designed for cutting stainless steel / inox / aluminium - extrusions, welds, sections, trunking, pipes
 |
Depressed Centre Metal Cutting Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Discs wit more→h a 1.8mm thickness permit fine cutting where necessary on stainless steel and high grade metals. They have been developed to make angle grinders more versatile in use by allowing better access in some applications. Metal cutting discs must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure …
 |
Features:- For reliable cutting in general building material- Optimized diamond matrix in high quality standard for solid results
 |
Cuts materials that angle grinders previously couldn’t - Professionals value angle grinders for their ability to cut tough materials like concrete, stone and metal. With the EXPERT Carbide Multi Wheel more→this wonderful tool can be even more versatile, efficiently cutting all kinds of softer materials such as wood, plastic and modern composites. The EXPERT Carbide Multi Wheel uses sharp carbide grits on its rim to cut multiple materials extremely effectively. The grits are joined to a steel body by a laser technique for an extra strong bond, giving a safe and reliable cutting disc that maintains a constant speed and depth throughout a long lifespan. With the EXPERT Carbide Multi Wheel, your angle gr…
 |
Zirconium flap disc for descaling, rust removal, weld preparation, weld cleaning and general surface preparation. More durable than aluminium oxide flap discs. Abrasive flaps are attached to rigid dis more→c with epoxy adhesive - does not require backing pad. Depressed centre disc suitable for electric and air tools. Features and Benefits • Zirconium flap disc for descaling, rust removal, weld preparation, weld cleaning and general surface preparation. • More durable than aluminium oxide flap discs. • Abrasive flaps attached to rigid disc with epoxy adhesive - does not require backing pad. • Depressed centre disc suitable for electric and air tools. • Size/Bore: Ø125/22mm. • Model No. FD12580 Spe…
Wire & Cup Brushes208
 |
Price from £25.95
Compare prices3→Compare prices and buy Lessmann Knot End Wire Brush 22mm 6mm Shank 454278
The Lessmann Knot End Brushes are fitted with a 6mm shank. When the brush is in rotation it will open up and increase in diameter. This enables the operator to work in hard to reach areas such as dril more→led holes and recesses of all kinds.The Lessmann Knot End Brush With Shank has the following specification: Diameter: 22mm.Wire: 0.35 Steel.Additiona
 |
Price from £34.95 up to £37.46
Compare prices3→Compare prices and buy Sealey Cleaning Brush Set Injector Bore 14pc
• Ideal for cleaning and decarbonising areas with limited access, especially injector apertures before refitting.• Set includes 3-Piece Brass Brushes 18/20/25mm.• 2-Piece End Brushes 15/19mm.• 1-Piece more→Steel Rod.• 1-Piece Rod.• 6-piece blanking plugs.Ideal for cleaning and decarbonising areas with limited access, especially injector apertures before refitting. Set includes 3-piece brass brushes 18/20/25mm, 2-piece end brushes 15/19mm, 1-piece Steel rod, 1-piece rod and 6-piece blanking plugs.Technical Specification:B
 |
Price from £6.99 up to £7.49
Compare prices5→Compare prices and buy Bosch 0.2mm Crimped Steel Wire Wheel Brush 100mm 6mm Shank 1609200274
Fine Finish on Steel - The Wire Wheel provides a good fine surface finish. Fitted with crimped wire for light- to medium-duty cleaning applications on small surfaces, it is ideal for removing annealin more→g colour on welded seams. The wire wheel is suitable for cleaning work at high circumferential speeds on smaller steel surfaces, edges or in grooves. Moreover, it is suitable for removing rust, roughing, mat sanding and paint stripping. It is intended for use with drills with 6-mm shank. Brush wires are available in different thicknesses for variable levels of abrasive needs. Thicker wires are more aggressive, producing a coarser yet faster surface finish, while thinner wires deliver finer, smoother …
 |
Price from £5.49
Compare prices3→Compare prices and buy Lessmann Precision End Wire Brush 60mm 12mm 6mm Shank LES451161
The Lessmann End Brushes are fitted with a 6mm shank for cleaning and de-burring in hard to reach areas. They are ideal for the removal of paint and the cleaning of moulds and castings. Also for worki more→ng on edges and recesses and the inside of bores etc.The Lessmann End Brush With Shank has the following specification: Wire Type: Steel.Diameter: 12mmWire Height: 20mmOverall Length: 60mmWire Gauge: 0.30.Max Speed: 20,000/rpm.Addi
 |
Price from £3.49 up to £4.18
Compare prices6→Compare prices and buy Sealey Flat Wire Brush Ø75mm with 6mm Shaft
• Suitable for use with power drills.• ø6mm Shaft.• Crimped brassed steel filaments add extra rigidity and cleaning power.Suitable for use with power drills. ø6mm Shaft. Crimped brassed stee more→l filaments add extra rigidity and cleaning power.• Suitable for use with power drills. ø6mm Shaft. • Crimped brassed steel filaments add extra rigidity and cleaning power. • Model No. SFB75Technical Specification:D
 |
Price from £2.49
Compare prices3→Compare prices and buy Faithfull Flat End Crimped Wire Brush 12mm 6mm Shank WBSI12
This Faithfull Wire End Brush is suitable for cleaning paint or deburring moulds or castings in hard-to-reach areas such as cylinders. The brush has crimped steel wire and is designed for light to med more→ium-duty applications. Suitable for use in industrial power tools at higher speeds. The FAIWBSI12 Wire End Brush has the following specifications: Type: Flat End. Face diameter: 12 mm x 20 mm. Shaft: 6 mm (1/4in). Wire: 0.3 mm steel.Conforms to ISO 9001. and DIN EN1083-1 and 2.Additional Information:&bu
 |
Price from £3.49
Compare prices3→Compare prices and buy Faithfull Crimped Wire Wheel Brush 75mm 6mm Shank WBS75C
This Faithfull crimped steel Wire Circular Brush is designed for light to medium-duty applications such as cleaning metal surfaces prior to welding or painting. Fitted with a 6mm (1/4in) shank and des more→igned to operate with power tools up to a maximum of 4,500/min. Shaft: 6mm (1/4in). Wire: 0.30mm crimped steel wire. Conforms to ISO 9001 and DIN EN1083-1 and 2 standards.Diame
 |
Price from £24.99 up to £39.99
Compare prices7→Compare prices and buy Bosch Professional Clean Metal 100x0.5x180 Mm M14 Brush Cup 1608614011
Clean For Metal Wire Cup Brush Provides An Extra-Fine Surface Finish. Brush Wires Are Available In Different Thicknesses For Variable Levels Of Abrasive Needs. Thicker Wires Are More Aggressive, Produ more→cing A Coarser Yet Faster Surface Finish, While Thinner Wires Deliver Finer, Smoother Surface Results. It Is Intended For Use With Angle Grinders With An M14 Thread.Features
Important!
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
