Bosch GWS 17-125 TS Professional 06017D0400
Cutting Discs170
 |
• Aluminium oxide flap disc for descaling, derusting, weld preparation, weld cleaning and general surface preparation.• Abrasive flaps are attached to rigid disc with epoxy adhesive - does not require more→backing pad.• Depressed centre disc suitable for electric and air tools.• Size/Bore: ø125/22mm.
 |
Reliable Cuts - The Standard for Abrasive Diamond Cutting Disc provides reliable cuts in all sorts of abrasive materials. Its optimised diamond matrix delivers solid results thanks to the disc's high- more→quality standards, which are ensured by the Bosch diamond competence centre in Switzerland. Use this disc for cutting all sorts of abrasive materials. It is compatible with angle grinders. With 22.23 mm bore for standard locking nut angle grinders. Features and Benefits • For All Types of Abrasive Materials • Optimised diamond matrix delivers solid results Specifications Diameter: 125mm Bore diameter: 22.23mm Bore size: 22.23mm Cutting width: 1,6mm Segment height: 10mm
 |
The Marcrist BF850 AkkuMAX Turbo Diamond Blade is a high-performanc
 |
CorePlus Top Twelve General Purpose Cutting Blades provide low cost cutting in a wide variety of building materials. The blades, with premium graded quality diamond segments, and a tensioned high grad more→e steel core, were manufactured to EN 13236 quality standards. Suitable for cutting; concrete, concrete lintels, reinforced concrete lintels, hard sandstone, concrete pipes, concrete paving slabs, bricks, block paving slabs, concrete kerbs, clay pipes, hard slate, roofing tiles, quarry tiles, etc. Specification: Segment Height: 12mm.1 x CorePlus Top Twelve General Purpose Diamond Blade 125mm.Additiona
 |
Excellent Lifetime - The X571 Best for Metal has an excellent lifetime when grinding welding seams and coarse sanding metal surfaces. Its high-quality zirconia alumina/semi-fr
 |
Up to 3x more precise than a standard ceramic diamond disc - The tiles used in modern construction are often large, very hard and expensive. Cutting them to a high standard every time is therefore cru more→cial yet difficult. The EXPERT HardCeramic Tile-Cutting Disc uses Diamond Technology and a range of design features to deliver the best results consistently, even in the hardest ceramics. Bosch Diamond Technology, which brings new diamonds to the surface to ensure the rim is always sharp, allows our ceramic cutting disc to cut smoothly through even hard tiles. The thin, strong body and continuous fluted rim offer maximum control and keep vibration low for a high quality, chip-free cut. The Bosch …
 |
Expert Quality, Zirconium Oxide tapered flap discs, ideal for grinding and finishing ferrous or non-ferrous metals. Manufactured from fibre backed abrasive sheet, which is securely fixed to a reinforc more→ed backing disc with a chrome plated metal centre with a 22.2mm bore. Achieves a longer life when compared to resin fibre discs.
 |
The Turbo Rim design enhances cutting speed and efficiency, reducing vibration and providing a smoother, cleaner cut. Its advanced diamond technology ensures extended tool life and superior cutting po more→wer, making it perfect for heavy-duty applications. Compatible with standard angle grinders and saws, the Makita Diamak Turbo Rim is built for reliable performance and versatility. Features & Benefits • Ideal for concrete Specifications • Diameter: 125mm • Bore Size: 22.23mm • Quantity: 1
Wire & Cup Brushes322
 |
Price from £17.15 up to £26.95
Compare prices7→Compare prices and buy Bosch X Lock Steel Wire Cup Brush 0.5mm 75mm X-Lock 2608620727
Aggressive Cleaning on Metal - The X-LOCK Heavy for Metal Cup Brush, Knotted Wire provides an aggressive cleaning performance. It is fitted with knotted wire for heavy-duty cleaning applications on me more→dium-to-large steel surfaces. It is suitable for use with X-LOCK angle grinders. Changing brushes is fast and convenient thanks to the keyless X-LOCK system. Click it on with X-LOCK – the fastest accessory-chang
 |
Price from £14.95
Compare prices3→Compare prices and buy Lessmann 0.3 Steel Wire Cup Brush 50mm 6mm Shank LES435162
The Lessmann Cup Brush is fitted with 6mm shank and is ideal for working on medium to large areas. They are generally used for the removal of rust, paint, dirt or scale, and for polishing.Diame
 |
Price from £2.49
Compare prices3→Compare prices and buy Faithfull Flat End Crimped Wire Brush 12mm 6mm Shank WBSI12
This Faithfull Wire End Brush is suitable for cleaning paint or deburring moulds or castings in hard-to-reach areas such as cylinders. The brush has crimped steel wire and is designed for light to med more→ium-duty applications. Suitable for use in industrial power tools at higher speeds. The FAIWBSI12 Wire End Brush has the following specifications: Type: Flat End. Face diameter: 12 mm x 20 mm. Shaft: 6 mm (1/4in). Wire: 0.3 mm steel.Conforms to ISO 9001. and DIN EN1083-1 and 2.Additional Information:&bu
 |
Price from £11.95 up to £16.99
Compare prices4→Compare prices and buy Faithfull Wire Cup Brush Knot 65X M14X 2 0,5Mm Ss FAIWBT65S
Stainless Steel Twist Knot Wire Cup Brush for heavier duty applications such as the removal of slag, rust, scale or even dried concrete. Designed for use with a compatible thread angle grinder. Suitab more→le for industrial use and more specialist applications. Perfect for use on stainless steel. Conforms to ISO 9001, DIN EN 1083-1 and 2. Features: For the removal of slag, rust, scale or even dried cement For use with angle grinders that have a compatible thread For use with angle grinders that have a compatible thread Perfect for use on stainless steel Specifications: Dimensions: H:11.5 x W:6.0 x D:9.0 cm Colour: Multi Guarantee:5 years Material: Steel Model Number: FAIWBT65S
 |
Price from £6.95
Compare prices4→Compare prices and buy Stanley Crimped Steel Wire Wheel Brush 100mm 6mm Shank STA36010
These Stanley crimped wire wheels are ideal for cleaning and preparing surfaces. They are designed for use in drill chucks and can be used with standard corded or cordless drills. The high tensile ste more→el wire is heat treated for durability. An innovative internal holding plate construction helps to reduce wire movement for increased control and longer product lifetime. Features & Benefits • For use with electric drills • Suitable for corded and cordless machines • Ideal for cleaning and surface preparation Specifications • Wheel Diameter: 100mm • Wheel Thickness: 12mm • Shank Diameter: 6m
 |
Price from £5.69 up to £7.28
Compare prices6→Compare prices and buy Draper Crimped Wire Cup Brush, 60mm, M14
Manufactured from 0.3mm hardened brassed steel wire. Designed for use with angle grinders. M14 thread. Display packed.
 |
Price from £23.95 up to £23.99
Compare prices4→Compare prices and buy Lessmann X Lock Non Sparking Crimped Wire Wheel 115mm X-Lock 423.17X
These Lessmann X-Lock non-sparking brushes are suitable for use on hand-held angle grinders with the X-Lock fitting, they can be used for polishing, light deburring work, and removing rust, paint, dir more→t, and scale. The brush with steel wire is used for flexible work on large steel surfaces. The high-grade 'Made in Germany' quality is often used in the metalworking industry and in craft businesses, car workshops, and by staircase, railing and container builders. Features of the wire brushes are their dense filling and precise concentricity.1 x Lessmann X-Lock Crimped Steel Bevel Brush 115mm Non Spark
 |
Price from £9.95 up to £13.95
Compare prices5→Compare prices and buy Bosch 0.3mm Crimped Brass Coated Wire Cup Brush 70mm M14 Thread 1608614020
Extra-Fine Finish - The Clean for Metal Wire Cup Brush delivers an extra-fine surface finish. The wire cup brush is fitted with brass-coated crimped wire for light- to medium-duty cleaning application more→s. It is suitable for removing coatings, rust and paint stripping on medium to large metal and non-ferrous metal surfaces. This wire cup brush is also suitable for roughing, matt sanding, cleaning formwork boards and facings. It is intended for use with angle grinders. The brass-coated wires on the brush provide protection against corrosion. Brush wires are available in different thicknesses for variable levels of abrasive needs. Thicker wires are more aggressive, producing a coarser yet faster …
Important!
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
