Bosch GWS 18V-10 Professional 06019J4003
Cutting Discs210
 |
Aluminium oxide flap disc for descaling, rust removal, weld preparation, weld cleaning and general surface preparation. Abrasive flaps are attached to rigid disc with epoxy adhesive - does not require more→backing pad. Depressed centre disc suitable for electric and air tools. Features & Benefits: • Aluminium oxide flap disc for descaling, rust removal, weld preparation, weld cleaning and general surface preparation. • Abrasive flaps are attached to rigid disc with epoxy adhesive - does not require backing pad. • Depressed centre disc suitable for electric and air tools. • Size/Bore: Ø125/22mm. • Model No. FD125120E Specifications: Model No FD125120E Bore: Ø22mm Brand: Sealey Disc Size: Ø125mm Grit:…
 |
Lasts up to 4x longer than a standard multi material diamond disc - On modern construction sites you need to cut a wide variety of hard materials, and these take their toll on tools. The EXPERT MultiM more→aterial Disc is the ideal accessory for busy construction professionals needing to cut concrete, brick, roofing tiles and reinforced concrete - because it simply keeps doing the job for longer. The high segments on this cutting disc are made from an advanced matrix of metal and diamonds, which is designed to stay razor sharp. These segments are laser-welded onto a hard steel body; and the sides are fluted to remove dust for efficiency and longevity. This mix of optimum diamond grits and advanced …
 |
Excellent Lifetime - The X-LOCK X571 Best for Metal Flap Disc offers an excellent lifetime on metal applications. Its high-quality zirconia alumina/semi-fr
 |
Depressed Centre Metal Grinding Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Use in s more→tock removal applications on ferrous and non-ferrous metal. By presenting the disc to the workpiece at an angle of 45º, the most efficient results are achieved. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted. SAFETY TIPS Read the manufacturer's instructions carefullyWear …
 |
A flat metal cutting disc which is ideal for working on steel. Part of a range of Makita reinforced abrasive cutting and grinding discs which are suitable for use with grinders and disc cutters. Speci more→fications • Model No: D-18667 (replaces A-85313) • Diameter: 125mm • Thickness: 2.5mm • Bore: 22.2mm • Quantity: 1 Note generic image is shown for illustration purposes. Please refer to the description for the specifications of the item you will be purchasing Features and Benefits • Flat centre cutting disc • Ideal for cutting steel
 |
The Milwaukee Pro+ Thin Metal Cutting Discs are iron and sulphur free top line thin cut-off wheels for all steels. Best suitable for stainless (except the 350 x 4mm) and acid-resistant steel, hardox, more→heat-resistant cast steel, spring steel, mild and tool steel. Features & Benefits • 50% less cutting time and 50% less dust than standard 3 mm thick discs. • Lower material loss. Specifications • Bore Size: 22.2mm • Disc Diameter: 125 • Thickness: 1mm • Pack Quantity: 10
 |
76.97Buy!
£
£
Idealo.co.uk
Delivery: in United Kingdom
Report
Diamond Cutter / Plastic / Quantity 1 Piece / Disc Diameter 125 mm
 |
Reilable Performance in Stone - The standard for stone cutting disc cuts reliably in stone. It features a good silicon carbide and resin blade specifically designed for work on stone. The product is i more→ntended for work on stone. For use with Bosch angle grinders. Bosch cutting discs comply with the maximum safety requirements, such as EN 12413. With 22.23 mm bore for standard locking nut angle grinders. Features and Benefits • Reilable Performance in Stone • Standard for Stone cutting disc cuts reliably in stone • The silicon carbide and resin blade is specifically designed for work on stone Specifications Specification: C 30 S BF Diameter: 125mm Bore size: 22,23mm Thickness: …
Wire & Cup Brushes307
 |
Price from £2.28 up to £2.99
Compare prices6→Compare prices and buy Faithfull Crimped Wire End Brush 25mm 6mm Shank WBS25E
This Faithfull Wire End Brush is suitable for cleaning paint or deburring moulds or castings in hard-to-reach areas such as cylinders. The brush has crimped steel wire and is designed for light to med more→ium-duty applications. Suitable for use in industrial power tools at higher speeds. The FAIWBS25E Wire End Brush has the following specifications: Type: Flat End. Face Diameter: 25 mm. Shaft: 6 mm (1/4 inch). Wire: 0.3 mm crimped steel. Conforms to ISO 9001. and DIN EN1083-1 and 2.Additional Information:&bu
 |
Price from £2.50 up to £3.49
Compare prices6→Compare prices and buy BlueSpot Crimped Steel Wire Cup Brush 65mm M14 Thread 19219
The BlueSpot Tools Steel Wire Cup Brush is manufactured from hardened steel wire for increased durability. Ideal for preparing metal surfaces for welding and painting.This BlueSpot Tools Steel Wire Cu more→p Brush has the following specification: Wire: 0.3mm.Diameter: 65mm (2 1/2in) / M14 x 2 Fitting.Max. Safe Speed: 12500 RPM.Additional Information:&bu
 |
Price from £4.49
Compare prices6→Compare prices and buy Bosch 0.2mm Crimped Brass Wire Brush 50mm 6mm Shank 2608622008
Fine Finish on Steel - The Wire Cup Brush delivers an extra-fine surface finish. This Wire Cup Brush is fitted with brass-coated crimped wire for light-to-medium
 |
Price from £2.12 up to £2.95
Compare prices5→Compare prices and buy Faithfull Point End Crimped Wire Brush 12mm 6mm Shank WBSI12P
This Faithfull Wire End Brush is suitable for cleaning paint or deburring moulds or castings in hard-to-reach areas such as cylinders. The brush has crimped steel wire and is designed for light to med more→ium-duty applications. Suitable for use in industrial power tools at higher speeds. The FAIWBSI12P Wire End Brush has the following specifications: Type: Pointed end. Face diameter: 12/60 mm x 20 mm. Shaft: 6 mm (1/4in). Wire: 0.3 mm steel. Conforms to ISO 9001. and DIN EN1083-1 and 2.Additional Information:&bu
 |
Price from £14.34 up to £16.95
Compare prices5→Compare prices and buy Lessmann 0.5 Steel Wire Knot Cup Brush 65mm M10 x 2.0 Thread LES482214
Knot Cup Brushes are for heavy-duty use for the preparing of metal surfaces before painting, and the removal of slag, rust, scale or concrete waste.Lessmann knotted brushes are filled with a special s more→teel wire of high tensile strength in order to meet the demands of this type of brush. Products marked with a * have a bridle fitted which an be removed to expose a further 20mm of useable wire.Diameter. 65mm.Bore. M10.Wire Gauge. 0.50. Wire Type. Steel.Max. R.P.M. 12,500.Addition
 |
Price from £8.77 up to £12.95
Compare prices6→Compare prices and buy Draper Brassed Steel Wire Cup Brush 100mm M14 Thread
This wire cup brush is designed for light to medium-duty work and delivers rapid stock removal from a wide variety of surfaces. The bristles are made from hardened dipped brassed steel wire, which giv more→es a high level of durability and resistance to oxidation. The brush is strong enough to provide reliable performance, and the crimping is flexible to tackle recessed areas and irregular surfaces. The cup shape works flat to the surface to cover a large surface area. Compatible with most angle grinders with an M14x2 connection. Conforms to EN1083-1 and EN1083-2 Features and Benefits • Designed for light to medium-duty work and delivers rapid stock removal from a wide variety of surfaces …
 |
14.81Buy!
£
£
PowerToolsDirect.com
Delivery: in United Kingdom
Report
Knot Cup Brushes are for heavy-duty use for the preparing of metal surfaces before painting and the removal of slag rust scale or concrete waste.Lessmann knotted brushes are filled with a special s more→teel wire of high tensile strength in order to meet the demands of this type of brush. Products marked with a * have a bridle fitted which an be removed to expose a further 20mm of useable wire.This Lessmann Knot Cup Brush has the following specification: Diameter: 65mmThread: M10 x 1.25Wire Gauge. 0.50Wire Type. SteelMax. R.P.M. 12 500PTDLES482213
 |
Price from £4.49
Compare prices5→Compare prices and buy Bosch 0.3mm Crimped Steel Wire Wheel Brush 50mm 6mm Shank 2608622112
Fine Finish on Steel - The Wire Wheel provides a good fine surface finish. Fitted with crimped wire for light- to medium-duty cleaning applications on small surfaces, it is ideal for removing annealin more→g colour on welded seams. The wire wheel is suitable for cleaning work at high circumferential speeds on smaller steel surfaces, edges or in grooves. Moreover, it is suitable for removing rust, roughing, mat sanding and paint stripping. It is intended for use with drills with 6-mm shank. Brush wires are available in different thicknesses for variable levels of abrasive needs. Thicker wires are more aggressive, producing a coarser yet faster surface finish, while thinner wires deliver finer, smoother …
Power Tool Batteries & Chargers19
 |
41.49Buy!
£
£
Idealo.co.uk
Delivery: in United Kingdom
Report
Charger / Type of Rechargeable Battery Li-Power / Number of Batteries 1 / LED Display
 |
Price from £50.99
Compare prices2→Compare prices and buy Bosch Pt Gal18v-160 Battery Charger 1600A02T5G
Charging a battery-powered power tool with a slow battery charger is frustrating, wastes time, and disrupts the pace of work.For this reason, we have developed the GAL 18V-160 Professional.Th
 |
105.25Buy!
£
£
PowerToolsDirect.com
Delivery: in United Kingdom
Report
Bosch GAL 3680 CV Multi-Volt Fast Charger for all Bosch Li-ion batteries from 14.4 to 36 volts. It offers 100% faster charging of the batteries (compared to AL 3640 CV). Active Air Cooling provides lo more→nger lifetime of the batteries. The quick charge mode means that a 4.0Ah battery is ready to use with 80% of its capacity after only 25 mins. Specification: Battery Charging Voltage: 14.4-36V.Charge Current: 8 A.PTDBSH600A004
 |
Price from £95.00 up to £128.95
Compare prices8→Compare prices and buy Bosch GAL 18 V-160 C 18v Battery Charger and GCY Bluetooth Module 240v 1600A019S8
The Bosch PRO GAL 18v-160 C Battery Charger and GCY Bluetooth Module is the world’s fastest 18v charger, it enables charging a ProCORE 18v 8.0ah batteries from 0-80% in just 32 minutes. The Bluetooth more→Connectivity module enables control of charging modes via smartphone and also provides battery health information. The GAL 18v-160 C also features 2-fan Active Air Cooling, 5-level charging indicator, Power Boost button and a wall mounting option. This charger is compatible with all Bosch Professional 18v batteries Features & Benefits • Active air cooling • Charge level indicator • Compatible with all Bosch Professional 18v batteries • Bluetooth Connectivity • Worlds fa…
Important!
Compatibility with specific models Grinders & Polishers should be confirmed with the online store manager directly before purchase.
Compatibility with specific models Grinders & Polishers should be confirmed with the online store manager directly before purchase.
