Bosch GWS 8-115 Professional 0601820070
Cutting Discs355
 |
The Faithfull Aluminium Oxide Flap Discs are suitable for heavy-duty applications. The 72 flaps enables fast stock removal with minimal risk of damage through gouging or discolouration. A lightweight more→disc design reduces operator fatigue, and is easier to control, providing better quality and consistency of your surface finish. The layered disc is cooler, and quieter than typical grinding/abrasi
 |
Reliable Cutting - The Standard for Metal Cutting Disc cuts reliably through metal. Its aluminium oxide disc is designed for general use with metal. Use this disc for cutting metal. It is compatible w more→ith angle grinders. Bosch cutting discs comply with the maximum safety requirements, such as EN 12413. With 22.23 mm bore for standard locking nut angle grinders. Features and Benefits • Reliable Cutting in Metal • Standard for Metal Cutting Disc cuts reliably through metal • The aluminium oxide disc is designed for general use with metal Specifications Specification: A 30 S BF Diameter: 115mm Bore size: 22,23mm Thickness: 2,5mm Bore diameter: 22,23mm Thickness 2: 2,5mm
 |
Flat cutting disc designed for fast straight cutting on various metal working applications including steel, structural steel and sheet metal. Manufactured from premium quality aluminium oxide, which h more→as been resin bonded and reinforced with fibreglass to improve the strength and performance of the disc. The bore has a stainless-steel ring to allow the cutting disc to be safely mounted onto the machine.
 |
A pack of hardened and tempered diamond blades offering a selection of different cuts and finishes. The continuous rim provides a smooth finish and is designed for use on ceramic and natural stone til more→es. The segmented rim creates a faster cut and is an effective general-purpose blade for use on concrete, bricks, stone, granite and marble, whilst the continuous turbo rim provides a fast cut and smooth finish on granite, marble and stone.
 |
• Aluminium oxide flap discs for descaling, derusting, weld preparation, weld cleaning and general surface preparation.• Abrasive flaps are attached to rigid disc with epoxy adhesive - does not requir more→e backing pad.• Depressed centre discs suitable for electric and air tools.Technical SpecificationBo
 |
Flat Stone Cutting Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Stone cutting discs more→must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefullyWear goggles to guard against flying chips or dustInspect the condition of the wheel frequentlyAdjus
 |
Reliable Performance - The Standard for Inox Cutting Disc is a reliable choice for working on Inox. The disc is made of aluminium oxide specifically designed for use with Inox. It is free of ferrous, more→sulphurous and chlorinated fillers. Use this disc for cutting Inox. It is compatible with Bosch angle grinders. Bosch cutting discs comply with the maximum safety requirements, such as EN 12413. With 22.23 mm bore for standard locking nut angle grinders. Features and Benefits • Reliable Performance in Inox • The Standard for Inox Cutting Disc offers a reliable choice when working with Inox • An aluminium oxide disc specifically designed for use on Inox Specifications Specification: …
 |
These Makita Type 41 Pro Cutting discs are designed for fast clean cutting and are particularly suitable for use with cordless angle grinders for around 40% longer battery life over a standard cutting more→wheel. They are manufactured from high quality bonded 60G aluminium oxide for long life and are suitable for cutting steel and stainless steel. Please note generic stock image shown for illustration purposes only. Refer to the description for the specifications. Specifications • Diameter: 115mm • Thickness: 1.2mm • Bore: 22.23mm Contents • 10 Discs
Wire & Cup Brushes323
 |
Price from £19.95
Compare prices3→Compare prices and buy Lessmann 0.5 Steel Wire Conical Knot Brush 100mm M14 Thread
The Lessmann Conical Knot Brushes with left hand twisted knots to increase stability. The special shape of the conical brushes enables the user to work in hard to reach places. They have been designed more→for heavy-duty use, for the preparing of metal surfaces before painting, and the removal of slag, rust, scale, or concrete waste.Diameter. 100mm.Width. 10mm.Bore. M14.Wire Gauge. 0.50.Wire Type. Steel.Max R.P.M. 12,500Additiona
 |
Price from £24.95
Compare prices3→Compare prices and buy Lessmann 0.5 Steel Wire Knot Wheel Brush 125mm 22.2mm Bore
The Lessmann Knot Wheel Brushes are for grinders, angle grinders and stationary machines, used in the preparation and re-working of bolt fillet and butt welds. They remove scale, rust, paint, slag, ru more→bber residue and can be used for de-burring. They are filled with a special high tensile strength steel wire in order to meet the exacting requirements during use.This Lessmann Knot Wheel Brush has the following specification: Diameter: 125mm.Width: 14mm.Bore: 22.2mm.Wire Gauge: 0.50.Wire Type: Steel.Max RPM: 12,500/min.Addi
 |
Price from £12.38 up to £15.95
Compare prices5→Compare prices and buy Bosch Conical 0.35mm Inox Crimped Wire Wheel 100mm M14 Thread
Extra-Fine Finish - The Clean for Inox Bevel Brush provides an extra-fine surface finish. Its conical bevel brush is fitted with crimped wire for light- to medium-duty cleaning applications in hard to more→reach areas, making it ideal for the cleaning of smaller areas at high circumferential speeds. The brush can be used on stainless steel, aluminium or non-ferrous metal surfaces and on edges or in grooves. It is also suitable for removing rust, roughing, matt sanding, paint stripping and removing annealing colour on welded seams. It is intended for use with angle grinders with an M14 thread. Brush wires are available in different thicknesses for variable levels of abrasive needs. Thicker wires are …
 |
Price from £3.49 up to £4.18
Compare prices6→Compare prices and buy Sealey Flat Wire Brush Ø75mm with 6mm Shaft
• Suitable for use with power drills.• ø6mm Shaft.• Crimped brassed steel filaments add extra rigidity and cleaning power.Suitable for use with power drills. ø6mm Shaft. Crimped brassed stee more→l filaments add extra rigidity and cleaning power.• Suitable for use with power drills. ø6mm Shaft. • Crimped brassed steel filaments add extra rigidity and cleaning power. • Model No. SFB75Technical Specification:D
 |
Price from £7.49 up to £8.23
Compare prices7→Compare prices and buy Sealey Twist Knot Wire Cup Brush Ø65mm M10 x 1.25mm
• Suitable for use with power tools up to the maximum rated rpm.• Twisted steel filaments give more aggressive cleaning action - ideal for heavy rust removal.Suitabl
 |
Price from £21.95
Compare prices3→Compare prices and buy Lessmann 0.3 Steel Wire Cup Brush 70mm 6mm Shank
The Lessmann Cup Brush is fitted with 6mm shank and is ideal for working on medium to large areas. They are generally used for the removal of rust, paint, dirt or scale, and for polishing.Diame
 |
Price from £2.49
Compare prices3→Compare prices and buy Faithfull Flat End Crimped Wire Brush 12mm 6mm Shank
This Faithfull Wire End Brush is suitable for cleaning paint or deburring moulds or castings in hard-to-reach areas such as cylinders. The brush has crimped steel wire and is designed for light to med more→ium-duty applications. Suitable for use in industrial power tools at higher speeds. The FAIWBSI12 Wire End Brush has the following specifications: Type: Flat End. Face diameter: 12 mm x 20 mm. Shaft: 6 mm (1/4in). Wire: 0.3 mm steel.Conforms to ISO 9001. and DIN EN1083-1 and 2.Additional Information:&bu
 |
Price from £6.49
Compare prices3→Compare prices and buy BlueSpot Bevelled Crimped Steel Wire Cup Brush 115mm M14 Thread
The BlueSpot Tools Steel Bevel Wire Cup Brush is manufactured from hardened steel wire for increased durability. Ideal for preparing metal surfaces for welding and painting. Specifications: Wire: 0.3m more→m.Diameter: 115mm (4 1/2in) / M14 x 2 Fitting.Maximum safe speed: 12,500 RPM.Additional Information:&bu
Important!
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
