Bosch GWS 880 Professional 060139600A
Cutting Discs198
 |
Reilable Performance in Stone - The standard for stone cutting disc cuts reliably in stone. It features a good silicon carbide and resin blade specifically designed for work on stone. The product is i more→ntended for work on stone. For use with Bosch angle grinders. Bosch cutting discs comply with the maximum safety requirements, such as EN 12413. With 22.23 mm bore for standard locking nut angle grinders. Features and Benefits • Reilable Performance in Stone • Standard for Stone cutting disc cuts reliably in stone • The silicon carbide and resin blade is specifically designed for work on stone Specifications Specification: C 30 S BF Diameter: 125mm Bore size: 22,23mm Thickness: …
 |
The Best for Ceramic Diamond Cutting Disc delivers clean cuts in tiles for fittings in installation work. Smooth cuts with minimal chipping are made possible by the continuous cutting rim. Additionall more→y, the diamond matrix is optimised to cut through tiles. Use this disc on porcelain, tiles and ceramic. Appropriate for GWS 10,8-76 V-EC Professional cordless angle grinder with 10 mm toolholder • Clean Cuts in Tiles • Best for Ceramic Diamond Cutting Disc delivers clean cuts in tiles • Smooth cuts with minimal chipping are made possible by the continuous cutting rim • Diamond matrix is optimised to cut through tiles Specifications Diameter mm: 125 Bore diameter mm: 22.23 …
 |
The Milwaukee Pro+ Thin Metal Cutting Discs are iron and sulphur free top line thin cut-off wheels for all steels. Best suitable for stainless (except the 350 x 4mm) and acid-resistant steel, hardox, more→heat-resistant cast steel, spring steel, mild and tool steel. Features & Benefits • 50% less cutting time and 50% less dust than standard 3 mm thick discs. • Lower material loss. Specifications • Bore Size: 22.2mm • Disc Diameter: 125 • Thickness: 1mm • Pack Quantity: 10
 |
• Aluminium oxide flap disc for descaling, derusting, weld preparation, weld cleaning and general surface preparation.• Abrasive flaps are attached to rigid disc with epoxy adhesive - does not require more→backing pad.• Depressed centre disc suitable for electric and air tools.• Size/Bore: ø125/22mm.
 |
Flap discs have been developed primarily as an alternative to sanding discs and can be fitted directly onto an angle grinder without a backing pad. Lasting up to 25 times longer than sanding discs the more→y also provide a much better finish which will remain constant throughout the life of the disc. These zirconium flap discs suit the majority of metal grinding applications.Si
 |
Reliable in Metal - The Standard for Metal Grinding Disc is a reliable choice for grinding work on metal. Its aluminium oxide abrasive grain is well suited for general metal applications. It is intend more→ed for grinding metal. It is suitable for use with hand-held angle grinders. Maximum work safety thanks to the optimum three-layer fibreglass net. Manufactured in accordance with EN12413 With 22.23 mm bore for standard locking nut angle grinders. Features and Benefits • Reliable Choice for Metal • Standard for Metal Grinding Disc is a reliable choice for metal grinding • Aluminum oxide abrasive grain, functional fillers, additives with phenol resin bond matrix suited for metal applications …
 |
The Expert for Stone Cutting Disc provides powerful cutting performance in stone with maximum safety. The disc is composed of high-quality silicon carbide and resin specifically designed for work on s more→tone with impressive results. The disc's precision-manuf
 |
The Best for Inox Cutting Disc has an outstanding lifetime when cutting Inox. Through its ceramic-encapsu
Wire & Cup Brushes172
 |
Price from £5.49
Compare prices2→Compare prices and buy Lessmann Precision End Wire Brush 60mm 12mm 6mm Shank LES451161
The Lessmann End Brushes are fitted with a 6mm shank for cleaning and de-burring in hard to reach areas. They are ideal for the removal of paint and the cleaning of moulds and castings. Also for worki more→ng on edges and recesses and the inside of bores etc.The Lessmann End Brush With Shank has the following specification: Wire Type: Steel.Diameter: 12mmWire Height: 20mmOverall Length: 60mmWire Gauge: 0.30.Max Speed: 20,000/rpm.Addi
 |
Price from £3.16 up to £4.72
Compare prices6→Compare prices and buy Draper Rotary Wire Brush, 6 x 75mm
Brassed crimped steel wire with 6mm diameter shank. Display packed.
 |
Price from £5.95
Compare prices5→Compare prices and buy Bosch 0.3mm Crimped Inox Steel Wire Brush 50mm 6mm Shank 2608622117
Fine Finish on Stainless Steel - The Wire Cup Brush provides a good fine surface finish. It is fitted with crimped wire for light-to-medium
 |
Price from £3.49 up to £4.18
Compare prices6→Compare prices and buy Sealey Flat Wire Brush Ø75mm with 6mm Shaft
• Suitable for use with power drills.• ø6mm Shaft.• Crimped brassed steel filaments add extra rigidity and cleaning power.Suitable for use with power drills. ø6mm Shaft. Crimped brassed stee more→l filaments add extra rigidity and cleaning power.• Suitable for use with power drills. ø6mm Shaft. • Crimped brassed steel filaments add extra rigidity and cleaning power. • Model No. SFB75Technical Specification:D
 |
Price from £15.95
Compare prices2→Compare prices and buy Faithfull Twisted Knot Wire Cup Brush 100mm M14 Thread WBT100
Faithfull Twist Knot Wire Cup Brush for heavier duty applications such as the removal of slag, rust, scale or even dried concrete. Designed for use with a compatible thread angle grinder. Suitable for more→industrial use and more specialist applications.Fa
 |
Price from £6.95 up to £7.56
Compare prices5→Compare prices and buy Sealey Twist Knot Wire Flat Brush Ø75mm with Ø6mm Shaft
• Twist knot flat wire wheel.• Stainless steel.• Shaft: ø6mm. • Width: ø75mm.• Max Speed: 12000rpm.Twist knot flat wire wheel, ø75mm width and a ø6mm shaft.• Twist knot flat wire w more→heel. • Stainless Steel. • Shaft: ø6mm. • Width: ø75mm. • Max Speed: 12000rpm. • Model No. TKFBS75Technica
 |
Price from £8.95
Compare prices2→Compare prices and buy Faithfull Stainless Steel Crimped Wire Cup Brush 75mm M14 Thread WBC75S
Faithfull Crimped Wire Cup Brush for lighter to medium-duty applications such as cleaning metal surfaces prior to painting. Designed for use with a compatible thread angle grinder. Suitable for indust more→rial use and more specialist applications.Wi
 |
Price from £18.95
Compare prices2→Compare prices and buy Lessmann 0.35 Steel Wire Knot Cup Brush 65mm M14 x 2.0 Thread LES482117
Knot Cup Brushes are for heavy-duty use for the preparing of metal surfaces before painting, and the removal of slag, rust, scale or concrete waste.Lessmann knotted brushes are filled with a special s more→teel wire of high tensile strength in order to meet the demands of this type of brush. Products marked with a * have a bridle fitted which an be removed to expose a further 20mm of useable wire.Diameter. 65mm.Bore. M14.Wire Gauge. 0.35.Wire Type. Steel.Max. R.P.M. 12,500.Addition
Important!
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
