Dark mode
United Kingdom
Catalog   /   Tools & Gardening   /   Power Tools   /   Grinders & Polishers   /   Bosch

Bosch GWX 18V-10 Professional 06017B0101

Cutting Discs216

Excellent Lifetime - The X571 Best for Metal has an excellent lifetime when grinding welding seams and coarse sanding metal surfaces. Its high-quality zirconia alumina/semi-friable aluminium oxide gri more→t is tough and wear-resistant for extensive metalwork. This product is intended for metal. The X571 Best for Metal is compatible with angle grinders. The grit is bonded using fully synthetic resin for wear-resistance in heavy-duty applications on a backing material made of robust x-cloth for long-term use. The carrier plate is available in angled and straight, fibreglass and plastic versions. With 22.23 mm bore for standard locking nut angle grinders. Features and Benefits • Long Life • …
CorePlus Top Twelve General Purpose Cutting Blades provide low cost cutting in a wide variety of building materials. The blades, with premium graded quality diamond segments, and a tensioned high grad more→e steel core, were manufactured to EN 13236 quality standards. Suitable for cutting; concrete, concrete lintels, reinforced concrete lintels, hard sandstone, concrete pipes, concrete paving slabs, bricks, block paving slabs, concrete kerbs, clay pipes, hard slate, roofing tiles, quarry tiles, etc. Specification: Segment Height: 12mm.1 x CorePlus Top Twelve General Purpose Diamond Blade 125mm.Additional Information:• Diameter (mm): 125• Bore Diameter (mm): 22.23
A flat metal cutting disc which is ideal for working on steel. Part of a range of Makita reinforced abrasive cutting and grinding discs which are suitable for use with grinders and disc cutters. Speci more→fications • Model No: D-18667 (replaces A-85313) • Diameter: 125mm • Thickness: 2.5mm • Bore: 22.2mm • Quantity: 1 Note generic image is shown for illustration purposes. Please refer to the description for the specifications of the item you will be purchasing Features and Benefits • Flat centre cutting disc • Ideal for cutting steel
Aluminium oxide flap disc for descaling, rust removal, weld preparation, weld cleaning and general surface preparation. Abrasive flaps are attached to rigid disc with epoxy adhesive - does not require more→backing pad. Depressed centre disc suitable for electric and air tools. Features & Benefits: • Aluminium oxide flap disc for descaling, rust removal, weld preparation, weld cleaning and general surface preparation. • Abrasive flaps are attached to rigid disc with epoxy adhesive - does not require backing pad. • Depressed centre disc suitable for electric and air tools. • Size/Bore: Ø125/22mm. • Model No. FD12540E Specifications: Model No FD12540E Bore: Ø22mm Brand: Sealey Disc Size: Ø125mm Grit:…
The Turbo Viper – Tva Diamond Blade Is Recommended For Dry Cutting Of Hard Materials Such Asgranite, Rustic Tiles, Klinker, Refractories, Slate And, Of Course, Porcelain Tiles. The Specific Design Of more→The Diamond Rim Of The Tva Diamond Blade By Rubi Offers Faster Cutting Speed In The Hardest Materials Without Sacrificing The Quality Of The Finish.Features:- Higher Cutting SpeedSpecifications:- Weight: 0,152 Kg- Measurements: 125mm
Up to 3x faster than a benchmark Bosch disc - Professional metalworkers take pride in the beauty of a finished surface, but surface finishing can be a time consuming job. By minimising the process ste more→ps required to achieve a perfect finish, the EXPERT SCM Flap Disc ensures efficiency without compromising on quality. Part of the Bosch Surface Structure range of advanced abrasives, the Bosch EXPERT Surface Conditioning Material Flap Disc combines the toughness of aluminium oxide grits with a 3D non-woven structure to give a fast cutting SCM which does not smear. These discs are ideal for refining #36 fiber disc scratches on mild steel. Offering time savings to the professional by saving process …
Lasts up to 4x longer than a standard multi material diamond disc - On modern construction sites you need to cut a wide variety of hard materials, and these take their toll on tools. The EXPERT MultiM more→aterial Disc is the ideal accessory for busy construction professionals needing to cut concrete, brick, roofing tiles and reinforced concrete - because it simply keeps doing the job for longer. The high segments on this cutting disc are made from an advanced matrix of metal and diamonds, which is designed to stay razor sharp. These segments are laser-welded onto a hard steel body; and the sides are fluted to remove dust for efficiency and longevity. This mix of optimum diamond grits and advanced …
Fast and Powerful Cutting - The X-LOCK Expert for Metal Cutting Disc provides powerful cutting performance in metal with maximum safety. The disc is made of premium aluminium oxide with advanced pheno more→l resin, which copes with demanding applications while delivering good results. Moreover, the disc's precision-manufactured fibreglass net ensures high stability and safety when cutting. Bosch cutting discs comply with the maximum safety requirements, such as EN 12413, FEPA and oSa. X-LOCK cutting discs also fit standard angle grinders. Changing cutting discs is fast and convenient thanks to the keyless X-LOCK system. Click it on with X-LOCK – the fastest accessory-changing system on the market. A…

Wire & Cup Brushes304

Price from £2.74 up to £2.99 
Compare prices and buy Faithfull Crimped Wire End Brush 25mm 6mm Shank WBS25E
Compare prices6
This Faithfull Wire End Brush is suitable for cleaning paint or deburring moulds or castings in hard-to-reach areas such as cylinders. The brush has crimped steel wire and is designed for light to med more→ium-duty applications. Suitable for use in industrial power tools at higher speeds. The FAIWBS25E Wire End Brush has the following specifications: Type: Flat End. Face Diameter: 25 mm. Shaft: 6 mm (1/4 inch). Wire: 0.3 mm crimped steel. Conforms to ISO 9001. and DIN EN1083-1 and 2.Additional Information:• Diameter (mm): 25• End Type: Flat End• Wire: 0.30 Steel
Price from £17.83 up to £21.95 
Compare prices and buy Draper Expert Twist Knot Wire Cup Brush 60mm M10 x 1.5 Thread
Compare prices6
Expert Quality, industrial quality manufactured from 0.8mm hardened steel wire. Designed for use with angle grinders. Features and Benefits • Expert Quality • For angle grinders • 0.8m more→m hardened steel wire Contents 1 x Twist Knot Wire Cup Brush, 60mm, M10
Price from £3.00
Compare prices and buy Faithfull Point End Crimped Wire Brush 12mm 6mm Shank WBSI12P
Compare prices5
This Faithfull Wire End Brush is suitable for cleaning paint or deburring moulds or castings in hard-to-reach areas such as cylinders. The brush has crimped steel wire and is designed for light to med more→ium-duty applications. Suitable for use in industrial power tools at higher speeds. The FAIWBSI12P Wire End Brush has the following specifications: Type: Pointed end. Face diameter: 12/60 mm x 20 mm. Shaft: 6 mm (1/4in). Wire: 0.3 mm steel. Conforms to ISO 9001. and DIN EN1083-1 and 2.Additional Information:• Diameter (mm): 12• End Type: Pointed End• Wire: 0.30 Steel
Price from £16.55 up to £19.95 
Compare prices and buy Draper Expert Brassed Steel Wire Cup Brush 100mm M14 Thread
Compare prices6
Expert Quality, industrial quality manufactured from 0.3mm hardened brassed steel wire. Designed for use with angle grinders. Features and Benefits • Expert Quality • For angle grinders &bu more→ll; 0.3mm hardened brassed steel wire Contents 1 x Draper Expert Crimped Wire Cup Brush, 100mm, M14
Price from £13.95
Compare prices and buy Bosch X Lock Crimped Brass Wire Cup Brush 75mm X-Lock c
Compare prices5
Extra-Fine Finish on Metal - The X-LOCK Clean for Metal Cup Brush, Crimped Wire, Brass-Coated provides an extra-fine surface finish. Fitted with brass-coated crimped wire for light-to-medium-duty clea more→ning applications, the wire cup brush is suitable for removing coatings, rust and paint stripping on medium-to-large metal and non-ferrous metal surfaces. The brass-coated wires on the brush provide protection against corrosion. It is suitable for use with X-LOCK angle grinders. Changing brushes is fast and convenient thanks to the keyless X-LOCK system. Click it on with X-LOCK – the fastest accessory-changing system on the market. Features and Benefits • Extra-Fine Surface Finish on Metal an…
Price from £14.42 up to £20.99 
Compare prices and buy Faithfull Flat Wire Brush Knot 115Xm14X2 0,35Mm S, Multi FAIWBCT115S
Compare prices6
Flat Twist Knot Wire Brush, compatible with 115mm (4.1/2in) angle grinders with a M14 x 2 mount. Twist knot brushes are suitable for the removal of slag, rust, scale or even dried cement. Perfect for more→use on stainless steel. Standard wire brushes when used on stainless steel can contaminate and cause the material to rust. Conforms to ISO 9001, DIN EN 1083-1 and 2. Features: For the removal of slag, rust, scale or even dried cement Compatible with 115mm angle grinders Compatible with 115mm angle grinders Perfect for use on stainless steel Specifications: Dimensions: H:14.0 x W:2.5 x D:12.5 cm Colour: Multi Guarantee:5 years Material: Metal Model Number: FAIWBCT115S
Price from £37.19 up to £40.95 
Compare prices and buy Lessmann X Lock Non Sparking Stainless Steel Wire Cup Brush 85mm X-Lock 483.81X
Compare prices5
These Lessmann X-Lock non-sparking brushes are suitable for use on hand-held angle grinders with the X-Lock fitting, they can be used for polishing, light deburring work, and removing rust, paint, dir more→t, and scale. The brush with steel wire is used for flexible work on large steel surfaces. The high-grade 'Made in Germany' quality is often used in the metalworking industry and in craft businesses, car workshops, and by staircase, railing and container builders. Features of the wire brushes are their dense filling and precise concentricity.1 x Lessmann X-Lock Stainless Steel Knot Cup Brush 85mm Non Spark
Price from £21.80 up to £24.95 
Compare prices and buy Lessmann 0.5 Steel Wire Knot Wheel Brush 115mm 22.2mm Bore LES472211
Compare prices6
The Lessmann Knot Wheel Brushes are for grinders, angle grinders and stationary machines, used in the preparation and re-working of bolt fillet and butt welds. They remove scale, rust, paint, slag, ru more→bber residue and can be used for de-burring. They are filled with a special high tensile strength steel wire in order to meet the exacting requirements during use.This Lessmann Knot Wheel Brush has the following specification: Diameter: 115mm.Width: 14mm.Bore: 22.2mm.Wire Gauge: 0.50.Wire Type: Steel.Max RPM: 12,500/min.Additional Information:• Diameter (mm): 115• Thread: 22.2mm• Wire: 0.50 Steel• Width (mm): 14

Power Tool Batteries & Chargers17

79.99Buy!
£
MachineMart.co.uk
Delivery: to United Kingdom
Report
This benefits from a quick-charge mode which means a 4.0 Ah battery is ready to use with 80% of its capacity after only 25 mins.
36.99Buy!
£
BricoINN
Delivery: in United Kingdom
Report
Plastic case.It is made of lightweight plastic.Features:The Plastic Carrying Case provides for the safe storage transport of Bosch Power Tools.For Orbital Sanders.Material:Carry Case for PSS 200/250.
40.49Buy!
£
BricoINN
Delivery: in United Kingdom
Report
FEATURES: Equipment:- Number of Charging Compartments: 1- Charge Status Indicator: Yes- Max. Output Current (A): 8,0- Inc. Charger Cable: Yes- For Rechargeable Battery Technology: Lithium-Ion- Loading more→Area (V): 14,4 - 18 General:- Weight (g): 700
188.99Buy!
£
BricoINN
Delivery: in United Kingdom
Report
Specification:Bosch Starter Set 2x ProCORE18V 4.0Ah + GAL 18V-40:- Lithium-Ion battery- Optimized heat transfer to the outer surface- Battery voltage: 18 V- Battery capacity: 4 Ah- Weight (battery): 5 more→15 g- Charger GAL 18V-40- Charging power: 4 A- Battery charge indicator- Charging time:- Capacity (80%/100%): 48 / 65 minItems delivered:- 2x Battery ProCORE18V 4.0 Ah- 1x Charger GAL 18V-40Suitable for:Bosch:- ALB 18 Li, GAS 18V-1, GAS 18V-10 L, GBH 18V-EC, GBH 18V-LI, GBH 18V-20, GBH 18V-21, GBH 18V-26, GBH 18V-26 D, GBH 18V-26 F, GBH 18V-26D, GBH 18V-34 CF, GBH 18V-36 C, GBL 18V-120, GCB 18V LI, GCG 18V-600, GCM 18V-216, GCM 18V-305 C, GDR 18V-Li, GDR 18V-160, GDR 18V-200 C, GDR 18V-200C, GDS …
Important!
Compatibility with specific models Grinders & Polishers should be confirmed with the online store manager directly before purchase.
Filters
Models
Bosch (type)