CMT CMT7E
Diamond Core Bits & Milling Cutters598
 |
These cutters are for Trend Craft Dovetail Jigs. Specifications • Shank Diameter: 1/4 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 20 • Overall Length Metric: more→60 • Angle: 98
|
Two flute TC cutter giving good chip clearance. Ideal for shallow lateral routing cuts such as recessing hinges. Corners will require final trimming square with a hand chisel or a corner chisel. S more→pecifications • Shank Diameter: 1/4 • Dia Metric: 15.9 • Dia Imperial: 5/8 • Cut Length Metric: 19 • Overall Length Metric: 51
|
For producing ovolo and rounding over edge moulds, using a side fence or back fence. Specifications • Shank Diameter: 1/4 • Dia Metric: 22.2 • Dia Imperial: 7/8 • Cut Length Metri more→c: 15 • Cut Length Imperial: 19/32 • Overall Length Metric: 58.5 • Radius 1 Metric: 9.5
|
The Halls High Speed Steel Countersink with 1/4in hexagon shank 3 flute 90° included angle. Designed for use with power tools and for use on metal.Size. 16.5mm.Angle. 90° .PTDHLLXCM16
|
The manufacturing specification for Faithfull router bit cutters ensures that they are suitable for use by all professional tradesmen craftsmen and conscientious DIY enthusiasts. Every Faithfull rou more→ter cutter tip is made from tungsten carbide brazed onto a steel body and designed to cut a wide variety of timber and abrasive material such as MDF and plywood. With careful handling and under normal conditions they will outlast HSS grade cutters many times. These top quality cutters will ensure an excellent finish and provide the user with long lasting and reliable service. 1/4in ShankCutting Diameter: 12.0 mm 15/32in. Cutting Length: 19 mm. Shank Diameter: 1/4in.PTDFAIRB2
|
1/4" Rounding 25 x 7mm Radius TCT Router Bit Contents 1 x TCT Router Bit, 1/4" Rounding, 25 x 7mm Radius
|
Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods. For housing, grooving and mortising. Features 2mm micrograin Tungsten Carbide tips, for cutting the more→most abrasive materials to give extra long life. PTFE coated, indicated by distinctive black colouring. Can be used on hardwood & softwood, fibreboard, plywood and particle board. Etched dimensions on extra long 40mm shanks. Specifications • Shank Diameter: 8 mm • Dia Metric: 4 • Dia Imperial: 5/32 • Cut Length Metric: 11 • Overall Length Metric: 60
|
The Trend Two Flute Straight Cutters produce a cleaner finish than the single flute cutters. Suitable for grooving rebating morticing drilling and shallow lateral routing cuts such as recessing hin more→ges. Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard MDF plywood hardwoods and hard plastics.This Trend 3/80 x 1/4 TCT Two Flute Cutter has the following specification: D: 12.7mm (1/2in)C: 19mmOL: 64mmShank Diameter: 1/4inPTDTRE3801
Important!
Compatibility with specific models Routers & Trimmers should be confirmed with the online store manager directly before purchase.
Compatibility with specific models Routers & Trimmers should be confirmed with the online store manager directly before purchase.
