DeWALT DCH072N

Lasts up to 3x longer than a standard drill bit - Drilling through reinforced concrete is a tough job, and it has traditionally taken its toll on drill bits. Regular two-cutter bits get stuck in rebar more→and they eventually break. The Full Carbide Head on the EXPERT SDS plus-7X is an advanced 4-cutter design made from a single piece of the toughest metal: It doesn’t jam and presents no weakness on impact. Thanks to Bosch Carbide Technology and the Full Carbide Head, the EXPERT SDS plus-7X lasts far longer than regular hammer drill bits. It punches through rebar effectively so there is no need to stop, re-target or change bits when you strike steel. For construction professionals drilling concrete an…

Durability in Concrete - The SDS plus-3 Drill Bit offers durability when drilling in concrete. To prevent heat development, the 4-flute dura design provides effective dust removal for increased endura more→nce. It is made of high-alloy steel, which is produced with an optimised hardening technology to withstand wear. For additional resistance, indented cutting edges are made from an ideal Bosch-controlled carbide blend. The bit is intended for work on concrete and masonry and is to be used with rotary hammers with SDS plus holders. As proof of quality, the drill bit bears the test mark of the PGM Masonry Drill Bit Association Board, guaranteeing compliance with tight tolerances, exact drilling and …

The Stanley metal drill bits are high-quality, made from high-speed steel for general purpose drilling into metal. Engineered tip is ideal for drilling on contact, improved accuracy and drilling curve more→d surfaces. The round shank is suitable for use with corded and cordless hammer drills. With its CNC-ground flutes, the Stanley HSS-CNC Metal Drill Bits ensure efficient chip evacuation, reducing heat buildup during drilling for enhanced performance and longevity. Features & Benefits • For use with corded and cordless hammer drills • For fast accurate drilling in soft steel, sheet steel and non-ferrous metals • Computer numerically controlled process for greater accuracy and quality …

PG350 tile & porcelain drill bit for wet drilling. High concentration diamond rim, self-cooling tile drilling bit offering a professional solution for the infrequent driller. Drills every tile, is sel more→f-centring and never runs off and scratches the tile. Easy to use, and ideal for use with all cordless drills. Perfect laser sharp tear free holes in the hardest of materials. Specifications • Diameter: 26mm

• TCT Ultra 35 core bit with 3/4 in Weldon holder• Very long service life and outstanding cutting performance. Metric dimensions, cutting depth 35 mm.SpecificationsCutting depth: 35 mmBore Ø: 31 mm

Lasts up to 3x longer than a standard drill bit - Drilling through reinforced concrete is a tough job, and it has traditionally taken its toll on drill bits. Regular two-cutter bits get stuck in rebar more→and they eventually break. The Full Carbide Head on the EXPERT SDS plus-7X is an advanced 4-cutter design made from a single piece of the toughest metal: It doesn’t jam and presents no weakness on impact. Thanks to Bosch Carbide Technology and the Full Carbide Head, the EXPERT SDS plus-7X lasts far longer than regular hammer drill bits. It punches through rebar effectively so there is no need to stop, re-target or change bits when you strike steel. For construction professionals drilling concrete an…

Constructed from toughened steel, these DeWalt chisels undergo a microprocessor controlled heat treatment process to ensure durability and long life. Specifications • Length: 300mm • Pack quantity: 1

The Stanley FatMax® Thru tang bevel edge chisels have an ergonomic handle design incorporating a shatterproof polymer handle. The ergonomic soft grip longer handle is useful for maximum control, f more→eels good in the hand and is comfortable in all applications. The friction welded bolster also gives strength and durability. The steel striking cap can be struck with a steel hammer for increased cutting force and the body resists most solvents. The ISO Standard Blade is made from high quality ball bearing grade steel EN31 and is fully ground and finished for ultimate sharpness and the full length blade guard provides added safety. This FatMax chisel range has a superior design - 50% stronger handle …

Various Demolition Applications - The Flat Chisel provides standard chiselling for various demolition applications in concrete and brick. Good material removal on light application is made possible by more→the chisel´s flat cutting edge. The chisel is intended for mortising, demolition and adjustment work as well as for restoring joints and clearing reinforcements. It is compatible with hex shank systems. Flat Chisel provides standard chiselling for various demolition applications in concrete and brick With 19 mm hex shank for demolition hammers. Features and Benefits • Standard Chiselling in Concrete and Brick for Various Demolition Applications Specifications Total length: 400mm Chisel c…

The Stanley DYNAGRIP™ Wood Chisel is fitted with a steel striking cap handle which can be used with a steel hammer. with a longer, soft grip handle for improved grip and control, forged high car more→bon steel blades for reassurance of strength and durability. The pre-sharpened blade is ready for immediate use.1 x Stanley DYNAGRIP™ Bevel Edge Chisel with Strike Cap 16mm (5/8in)Additional Information:• Chisel Type: Bevel Edge• Size (mm): 16

Octagonal shank chisel manufactured from selected steel with polished cutting edge. Fitted with impact absorbing hand protection grip. Sold loose.

Chisel Set / SDS Plus / Total Length 250 mm / Feed Opening 20 mm / 4 Pieces

The DeWalt DCB115 is a compact, wall mountable XR multi-voltage battery charger with a bright LED indicator for displaying battery charge status as well as temperature and power alerts. It is capable more→of charging a 2ah battery pack in 30 minutes.Specifications• Voltage: 10.8/14.4/18 Volt• Battery Chemistry: Li-Ion • Charging Current: 4.0 A