Draper 83942 (DAT-DAS)
Cutting Discs81
 |
Pack of five BIM reciprocating saw blades manufactured to a high quality. For flexible cutting of ferrous and non-ferrous sheet metals and thin metals. Compatible with most reciprocating/s
 |
Features:Carbid
 |
IRWIN® Metal & Wood Cutting Sabre Saw Blades. Superior construction and design make them faster cutting and longer lasting. Labelling on the blade makes it easy to identify the right blade for the more→right application. Suitable for cutting materials which are 3.2mm (1/8in) and thicker. Such as plastic, wood, carbon steel and stainless steel.Pack of 5 IRWIN® 610R Metal & Wood Cutting Sabre Saw Blades 150mmAdditional Information:&bu
 |
Features:- Application: Pallets, green wood, shuttering- Features: Coarse cutting blade 4 teeth per inch- Very quick coarse cutting in pallets, green wood or shuttering- Tooth Type/Set: C - Ground and more→side set TeethSpecificat
 |
Lasts up to 50x longer than a Bi-Metal blade in tough materials - In vehicle rescue, getting into a car fast can be a matter of life and death. Emergency services are increasingly using reciprocating more→saws as a valuable rescue tool, but they require a seriously good blade that can reliably cut through modern automotive steel. The EXPERT ‘Vehicle Rescue’ is designed for this crucial task. As well as having ultra-hard carbide in its teeth, this vehicle demolition EXPERT has a special tip design that allows the blade to plunge cut into sheet metal. This is used in typical rescue methods such as cutting an extra door or accessing passengers through the roof. The short S957CHM version is ideal for …
 |
Reliable Cuts - The Standard for Universal Turbo Diamond Cutting Disc delivers reliable cuts in universal building materials. Its diamond matrix is engineered for cutting various construction componen more→ts, resulting in well-formed cutting edges. These high-qualitity standards are ensured by the Bosch diamond competence centre in Switzerland. Use this disc when cutting building materials such as concrete and masonry. It is compatible with angle grinders. With 22.23 mm bore for standard locking nut angle grinders. Features and Benefits • Reliable Cuts in Universal Building Materials • Standard for Universal Turbo Diamond Cutting Disc delivers reliable cuts in universal building materials …
 |
Milwaukee Heavy Duty Demolition Reciprocating Saw Blades. Improved tooth geometry for best speed and double the lifetime. Bi-metal quality cutting teeth with 8% cobalt giving the ultimate in performan more→ce and lifetime. TOUGH NECK: Stamped indentations around the reception strengthens the blade at its weakest point. Slim 0.90 mm thick blade body optimised for maximum speed and flexibility. Specifications • Blade Length: 150mm • Teeth per Inch: 18 • Max. Cutting Capacity (Steel Plate): 1.5-4mm • Max. Cutting Capacity (Inox): 1.5-4mm • Max. Cutting Capacity (Metal Pipe): 10-100mm • Max. Cutting Capacity (Non Ferrous Metals): 1.5-4mm • Max. Cutting Capacity (Steel): …
 |
Clean Curved Cuts - The S 713 AW Clean for Fibre Insulation Reciprocating Saw Blade delivers clean curved and plunge cuts in special materials. Its sharp, serrated knife edge produces tear-free result more→s, while the blade’s recessed body provides ultimate curved-cutting capabilities. Moreover, the serrated edge and a pointed tip make plunge cutting possible. Made from HCS (high carbon steel), the blade is appropriate for cutting fibre insulation materials. Its standard length of 150 mm enables a cutting capacity of up to 100 mm. The blade is ideal for use with cordless compact saws. It features a 1/2 inch universal shank. Fits all S-shank reciprocating saws. Features and Benefits • Clean Cu…
Abrasive Wheels & Belts2712
 |
Impressive Removal Rate - The X551 Expert for Metal has an impressive material removal rate on metal surfaces. The zirconia alumina and semi-friable aluminium oxide abrasive grit blend delivers a bril more→liant removal rate and lifetime on metal applications. Furthermore, its highly robust X-cloth with stable backing ensures durability and steady performances on tough surfaces. The grit is bonded using fully synthetic resin on X-cloth for optimal sanding behaviour. It is intended for deburring and welding preparation on carbon steel, mild steel, aluminium, non-ferrous metals and cast iron. It is also ideal for removing discolouration, stock and surface imperfections. The X551 Expert for Metal is …
 |
• Sanding sheets, perforated • High sanding capacity, little clogging and long service life guaranteed thanks to corundum abrasive grit and full bonding with artificial resins. For universal more→use on virtually all materials. Perforated, for use with perforated sanding pad and dust extraction, hook and loop fastening. Specifications Grain: 180 Edge length: 80 mm No. in pack: 5 pcs
 |
High quality and durable sanding sheets for use with quarter sheet orbital sanders. Features & Benefits • Designed for use with Quarter Sheet Orbital Sanders • High quality aluminium oxide g more→rain for superior finish • Resin bonding provides excellent grain adhesion and heat resistance for power sanding • Tough, durable backing for long life and high performance Specifications • Width: 115mm • Length: 140mm • Grit: 40g • Pack Quantity: 25
 |
Mesh sheets for half sheet orbital sanders. Features & Benefits • Mesh sanding sheets last at least four times longer than traditional DeWalt sanding sheets • Fibres are drawn away from the more→surface into the small holes, and don‘t sit between the material and the abrasive grains • Dust can be drawn through the mesh sanding sheet across a wider area rather than being limited to the holes in traditional sandpaper • Easier mesh sanding sheet selection as there is no requirement to match a specifc dust extraction pattern • The user can clean the mesh sheets, removing the dust from the wholes and bring the sheets back to a nearly new condition • Makes using the sander qu…
 |
Up to 2x faster than standard sandpaper - Sanding large surfaces is a time-consuming job: Frustratingly, many sandpapers rapidly clog with dust and lose their abrasiveness, making a long process even more→longer. By combining sharp grains and anti-clogging technology, the EXPERT C470 Sandpaper maintains its exceptional capabilities throughout. This means you can work faster, for longer, without compromising on the finish. To achieve the very best sanding surface, our aggressive grain alignment production method aligns the grits to offer their sharpest side. Then we cover them with strong bonding and an anti-clog coating. Along with an optimum grain density, this ensures maximum speed and minimal …
 |
Exceptionally Long Lifetime - The C430 Expert for Wood and Paint provides an exceptionally long lifetime when sanding wood, veneer and solid surfaces. Furthermore, its electrostatic open-coated surfac more→e with space between the grits ensures consistent dust removal, preventing sheet clogging. The tough abrasive grit is resistant to wear, allowing for extended and repeated use. This product is intended for the keying and sanding of paint, varnish, filler, primer and wood-based materials, and is suitable for intermediate sanding of varnish on surfaces. It is also suitable for sanding after wetting on certain materials as well as smoothing out feather edges. The C430 Expert for Wood and Paint sanding …
 |
Extra-Fine Finish - The Clean for Inox Wire Cup Brush provides an extra-fine surface finish. Fitted with crimped wire for light- to medium-duty cleaning applications, the wire cup brush is suitable fo more→r cleaning work such as removing coatings and rust. It is ideal for use on medium to large stainless steel, aluminium and non-ferrous metal surfaces, and is also suitable for roughing, matt sanding, paint stripping and texturing. It is intended for use with angle grinders with an M14 thread. Brush wires are available in different thicknesses for variable levels of abrasive needs. Thicker wires are more aggressive, producing a coarser yet faster surface finish, while thinner wires deliver finer, …
 |
Pre-polishing Lacquered Surfaces - The Polishing Felt is intended for pre-polishing dirty or scratched lacquered surfaces using a polish or grinding paste. It is suitable for use with delta sanders. J more→ust stick it on with hook and loop. Features and Benefits • Pre-polishing Dirty or Scratched Lacquered Surfaces • Polishing Felt for pre-polishing dirty or scratched lacquered surfaces using a polish or grinding paste • Suitable for use with delta sanders Specifications Grade: Hard Sheet dimensions: 93mm
Important!
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
