Draper 84125 (DAT-APS)
Cutting Discs118
 |
Milwaukee S744D Wood and Plastic Saw Blades. 3x faster aggressive triple sharpened tooth geometry for speed and splinter free cuts. Teeth are hardened and triple sharpened for a super sharp splinter f more→ree clean cut. 1.6 mm thick blade resists bending, reduces vibration and blate flattering at speed. Specifications • Blade Length: 150mm • Teeth per Inch: 6 • Max. Cutting Capacity (PVC): 6-50mm • Max. Cutting Capacity (Wood): 6-50mm • Pack Quantity: 3 Features and Benefits • 3x faster aggressive triple sharpened tooth geometry for speed and splinter free cuts • Teeth are hardened and triple sharpened for a super sharp splinter free clean cut • 1.6 mm thick …
 |
Milwaukee Heavy Duty Demolition Reciprocating Saw Blades. Improved tooth geometry for best speed and double the lifetime. Bi-metal quality cutting teeth with 8% cobalt giving the ultimate in performan more→ce and lifetime. TOUGH NECK: Stamped indentations around the reception strengthens the blade at its weakest point. Slim 0.90 mm thick blade body optimised for maximum speed and flexibility. Specifications • Blade Length: 150mm • Teeth per Inch: 18 • Max. Cutting Capacity (Steel Plate): 1.5-4mm • Max. Cutting Capacity (Inox): 1.5-4mm • Max. Cutting Capacity (Metal Pipe): 10-100mm • Max. Cutting Capacity (Non Ferrous Metals): 1.5-4mm • Max. Cutting Capacity (Steel): …
 |
This blade is suitable for use with corded and cordless sabre saws (including compact sabre saws). The S 967 XHM Endurance for Wood and Metal Demolition Recip Saw Blade performs in even the toughest a more→pplications, especially high-strength steel embedded in wood. It has extra-long life due to carbide technology that ensures effective cutting in even the strongest materials. The saw blade's new wide shoulder design provides ultimate support for its carbide teeth, allowing it to withstand extreme abuse. Furthermore, its large 5-7 teeth per inch (TPI) tooth design is optimal for demolition in wood with metal. S 967 XHM Carbide Technology, side set, ground Wood with embedded (hardened) nails/metal …
 |
Milwaukee Heavy Duty TORCH Demolition Reciprocating Saw Blade. Strong and Robust 1.06 mm thick body. Shatter resistant bi-metal blade body will bend and flex but not break. Thick 1.06 mm robust torch more→blade body for precise cuts in sheet metal and pipes. 25 mm blade height for improved stability and minimum vibration. Specifications • Blade Length: 150mm • Teeth per Inch: 10 • Max. Cutting Capacity (Inox): 4-10mm • Max. Cutting Capacity (Metal Pipe): 10-100mm • Max. Cutting Capacity (Non Ferrous Metals): 4-10mm • Max. Cutting Capacity (Steel): 4-10mm • Pack Quantity: 5 Features and Benefits • Robust 1.06 mm thick body • Shatter resistant bi-metal …
 |
Pack of five BIM reciprocating saw blades manufactured to a high quality. For flexible cutting of ferrous and non-ferrous sheet metals and thin metals. Compatible with most reciprocating/s
 |
Lasts up to 50x longer than a Bi-Metal blade in tough materials - Many blades advertised as being ‘for multi material’ are fine in wood and soft metal, but fail to cut tougher elements like screws or more→metal fittings. The EXPERT ‘Multi Material’ has no such problems: its carbide teeth can cut the hardest grades of steel – again and again. A real solution to the problem of blades that simply don’t last on the modern worksite, the Bosch EXPERT ‘Multi Material’ Reciprocating Saw Blade is a reliable partner that cuts more than just metal and wood. Plastics, construction composites and pre-fab elements used on building sites are all reliably cut thanks to Bosch Carbide Technology. The progressive toot…
 |
Lasts up to 50x longer than a Bi-Metal blade in tough material - The sheer abrasiveness of cement fibre board means it is one of the toughest materials for your recip saw blade. For installers, plumbe more→rs, electricians and any tradesmen involved in maintenance and restoration, however, cutting these boards is essential. The EXPERT ‘Fiber Plaster’ is designed to cut fibre plaster boards effectively over a long lifetime. Its extreme durability comes courtesy of Bosch Carbide Technology, integrating the hardest metal into an advanced tooth design. The relatively short, pointed blade gives good control and access to tight spaces: it is designed with productivity in mind. The Bosch EXPERT ‘Fiber Plaste…
 |
Milwaukee Wood / Metal / Plastic Universal Saw Blades. Its even width guarantees good cutting stability, excellent guidance and straight edge cutting through many different materials. Bi-metal quality more→cutting teeth with 8% cobalt for ultimate performance and extended lifetime. Specifications Blade Length: 150mm Teeth per Inch: 10/14 Max. Cutting Capacity (Aluminium): 3-10mm Max. Cutting Capacity (Non Ferrous Metals): 3-10mm Max. Cutting Capacity (Plastic Pipes): 3-100mm Max. Cutting Capacity (PVC): 10-50mm Max. Cutting Capacity (Sandwich Material): 5-100mm Max. Cutting Capacity (Steel): 3-10mm Max. Cutting Capacity (Wood with Nails): 5-100mm Pack quantity: 5 Features and Benefits • Bi-metal …
Abrasive Wheels & Belts3410
 |
Sanding Block / Wood / Quantity 1 Piece / Black / Sanding Form Rectangular
 |
Standard Applications - The Sanding Plate With hook-and-loop-T
 |
For rough shaping and smoothing wood and fiberglass, removing rust from metal surfaces and shaping rubber surfaces. Sanding bands are easily replaceable. Specifications Shank diameter: 3,2 mm Working more→diameter: 6,4 mm Grit: 120 Pack of 6
 |
4.99Buy!
£
£
Idealo.co.uk
Delivery: in United Kingdom
Report
Flap Grinding Disc / For Angle Grinder / Metal / Grit 40 / Sanding Form Round / Disc Diameter 115 mm
 |
Sanding Disc / Grit 80 / Quantity 1 Piece / Sanding Form Round / Disc Diameter 150 mm
 |
17.73Buy!
£
£
Idealo.co.uk
Delivery: in United Kingdom
Report
Sanding Disc / Metal / Quantity 1 Piece / Sanding Form Round
 |
Excellent Lifetime - The X-LOCK X571 Best for Metal Flap Disc offers an excellent lifetime on metal applications. Its high-quality zirconia alumina/semi-fr
Important!
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
