Einhell Expert Plus TE-AG 18/115 Li (2x4.0 Ah)
Cutting Discs371
 |
Reliable Performance in Inox - The X-LOCK Standard for Inox Cutting Disc delivers reliable performance in Inox. Its thin disc edge supports smooth and easy cutting. In addition, the disc is free from more→ferrous, sulphurous and chlorinated fillers. Bosch cutting discs comply with the maximum safety requirements, such as EN 12413. X-LOCK cutting discs also fit standard angle grinders. Changing cutting discs is fast and convenient thanks to the keyless X-LOCK system. Click it on with X-LOCK – the fastest accessory-chang
 |
Standard For Marble Diamond Cutting Disc Provides Reliable Cutting In All Types Of Marble And Plastic Material.Featur
 |
Depressed Centre Stone Cutting Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Depresse more→d centre cutting discs have been developed to make angle grinders more versatile in use by allowing better access in some applications. Stone cutting discs must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefullyWear goggles to guard against flying chips or dustInspect the …
 |
Lasts up to 50x longer than a Bi-Metal blade in tough materials - Cutting thin sheet metal and thin wall pipes is a tough job, but with a good recip saw blade you can manage: the real problems start w more→hen you cut stainless steel. This tough, high-alloy steel is an obstacle to construction or renovation workers and destroys blades. Bosch Carbide Technology consigns these problems to the past. The EXPERT ‘Thin Tough Metal’ is a leap forward in recip saw blade development, where the hardest metal is integrated into a tooth design optimised for steel sheets and pipes. The teeth are ground to a fine geometry that allows even thin sheets of stainless steel to be cut smoothly. Ideal for metal workers, plu…
 |
Up to 3x more precise than a standard ceramic diamond disc - The tiles used in modern construction are often large, very hard and expensive. Cutting them to a high standard every time is therefore cru more→cial yet difficult. The EXPERT HardCeramic Tile-Cutting Disc uses Diamond Technology and a range of design features to deliver the best results consistently, even in the hardest ceramics. Bosch Diamond Technology, which brings new diamonds to the surface to ensure the rim is always sharp, allows our ceramic cutting disc to cut smoothly through even hard tiles. The thin, strong body and continuous fluted rim offer maximum control and keep vibration low for a high quality, chip-free cut. The Bosch …
 |
The Bosch 2608900532 X-LOCK Expert Diamond Metal Wheel Cutting Disc lasts up to 100x longer than Bosch 2608603169 Cutting DiscThe Bosch 2608900532 has an exceptionally durable cutting edge using Bosch more→Diamond Technology. Cutting metals such as steel and cast iron has traditionally been tough on angle grinder discs, and many workers are familiar with the chemical smell of bonded discs burning away while they cut. With the EXPERT Diamond Metal Wheel, this smell can be consigned to the past - as can regular trips to a shop to buy new metal discs. For tradespeople and construction workers who are fed up with burning through bonded discs and money, the Bosch EXPERT Diamond Metal Wheel X-LOCK Diamond …
 |
• Aluminium oxide flap discs for descaling, derusting, weld preparation, weld cleaning and general surface preparation.• Abrasive flaps are attached to rigid disc with epoxy adhesive - does not requir more→e backing pad.• Depressed centre discs suitable for electric and air tools.Technical SpecificationBo
 |
Reliable Cuts - The Standard for Universal Turbo Diamond Cutting Disc delivers reliable cuts in universal building materials. Its diamond matrix is engineered for cutting various construction componen more→ts, resulting in well-formed cutting edges. These high-qualitity standards are ensured by the Bosch diamond competence centre in Switzerland. Use this disc when cutting building materials such as concrete and masonry. It is compatible with angle grinders. With 22.23 mm bore for standard locking nut angle grinders. Features and Benefits • Reliable Cuts in Universal Building Materials • Standard for Universal Turbo Diamond Cutting Disc delivers reliable cuts in universal building materials …
Wire & Cup Brushes200
 |
Price from £4.91 up to £5.36
Compare prices6→Compare prices and buy Sealey Flat Wire Brush Stainless Steel 75mm with 6mm Shaft
• Flat wire brush.• Crimped stainless steel filaments.• Shaft: ø6mm.• Diameter: ø75mm.• Maximum Speed: 4500rpm.Flat wire brush with crimped stainless steel filaments, 75mm width and a 6mm sh more→aft.• Flat wire brush. • Crimped stainless steel filaments. • Shaft: ø6mm. • Diameter: ø75mm. • Maximum Speed: 4500rpm. • Model No. SFBS75Technical Specification:D
 |
Price from £6.49
Compare prices3→Compare prices and buy Lessmann 0.35 Steel Wire DIY Cup Brush 50mm 6mm Shank LES43012307
The Lessmann DIY Cup Brush is fitted with 6mm shank. It has been designed for working on large surfaces, generally for the removal of rust, paint, dirt or scale, and for polishing. 430.123.07: Wire: 0 more→.35 Steel, Diameter: 50mm.430.133.07
 |
Price from £20.49 up to £28.95
Compare prices7→Compare prices and buy Bosch Professional Heavy Metal 90x0.5x150 Mm M14 Brush Cup 1608614001
Knotted Wire For Heavy-Duty Cleaning Applications In Metal Fits Ggs 6 And Ggs 8 Straight Grinders With M14 Thread. Metal Wire Cup Brush Provides An Extra-Coarse Surface Finish Suitable For Cleaning Wo more→rk On Medium To Large Steel Surfaces, Such As Removing Heavy Rust, Underseal, Paint Or Varnish Brush Wires Are Available In Different Thicknesses For Variable Levels Of Abrasive Needs. Thicker Wires Are More Aggressive, Producing A Coarser Yet Faster Surface Finish, While Thinner Wires Deliver Finer, Smoother Surface Results. It Is Intended For Use With Angle Grinders With An M14 Thread.Specific
 |
Price from £3.49
Compare prices3→Compare prices and buy Faithfull Crimped Wire Wheel Brush 75mm 6mm Shank WBS75C
This Faithfull crimped steel Wire Circular Brush is designed for light to medium-duty applications such as cleaning metal surfaces prior to welding or painting. Fitted with a 6mm (1/4in) shank and des more→igned to operate with power tools up to a maximum of 4,500/min. Shaft: 6mm (1/4in). Wire: 0.30mm crimped steel wire. Conforms to ISO 9001 and DIN EN1083-1 and 2 standards.Diame
 |
Price from £25.95
Compare prices3→Compare prices and buy Lessmann Knot End Wire Brush 22mm 6mm Shank 454278
The Lessmann Knot End Brushes are fitted with a 6mm shank. When the brush is in rotation it will open up and increase in diameter. This enables the operator to work in hard to reach areas such as dril more→led holes and recesses of all kinds.The Lessmann Knot End Brush With Shank has the following specification: Diameter: 22mm.Wire: 0.35 Steel.Additiona
 |
Price from £16.99 up to £20.95
Compare prices6→Compare prices and buy Bosch Professional X-lock Heavy Inox 75x0.5x125 Mm Brush Cup 2608620729
X-Lock Heavy For Inox Cup Brush, Knotted WireFeatures:- It Is Suitable For Use With X-Lock Angle Grinders.- X-Lock Heavy For Inox Cup Brush, Knotted Wire Provides An Aggressive Cleaning Performance- K more→notted Wire For Heavy-Duty Cleaning Applications On Medium-To-Large Surfaces- Ideal For Removing Heavy Rust, Paint Or Varnish On Stainless Steel, Aluminium And Non-Ferrous Metal Surfaces- Click It On With X-Lock – The Fastest Accessory-Chang
 |
Price from £2.04 up to £2.81
Compare prices7→Compare prices and buy Draper Flat Top Decarbonizing Wire Brush, 13mm
Brassed crimped steel wire brush with flat trim. 6mm diameter shanks. Brush length 25mm. Display packed.
 |
Price from £4.49 up to £5.03
Compare prices7→Compare prices and buy Sealey Wire Cup Brush Ø75mm with 6mm Shaft
• Suitable for use with power drills.• ø6mm Shaft.• Crimped brassed steel filaments add extra rigidity and cleaning power.Suitable for use with power drills. ø6mm Shaft. Crimped brassed stee more→l filaments add extra rigidity and cleaning power.• Suitable for use with power drills. • ø6mm Shaft. • Crimped brassed steel filaments add extra rigidity and cleaning power. • Model No. SCB75Technical Specification:D
Important!
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
