Einhell Expert TE-AG 18/115-2 Li Solo (4431166)
Cutting Discs268
 |
26.99Buy!
£
£
BricoINN
Delivery: in United Kingdom
Report
Cutting Disc Ø115mm X 1mm 50 Units.Specifica
 |
Up to 3x more precise than a standard ceramic diamond disc - The tiles used in modern construction are often large, very hard and expensive. Cutting them to a high standard every time is therefore cru more→cial yet difficult. The EXPERT HardCeramic Tile-Cutting Disc uses Diamond Technology and a range of design features to deliver the best results consistently, even in the hardest ceramics. Bosch Diamond Technology, which brings new diamonds to the surface to ensure the rim is always sharp, allows our ceramic cutting disc to cut smoothly through even hard tiles. The thin, strong body and continuous fluted rim offer maximum control and keep vibration low for a high quality, chip-free cut. The Bosch …
 |
Makita's A36N grinding discs were designed to out-perform all other aluminium grinding discs on the market. The unique bond structure is a combination of grit impregnated with a substance called stear more→ic acid. This specially formulated mix ensures lubrication is present between the grit and work surface at raised emperatures. Due to the low melting point of aluminium, problems can arise once a grinding surface reaches melting point. The useful substance present within the bond structure acts as a lubricant to reduce friction between grit and workpiece. Lower friction = less heat build up. By reducing the heat element, there is less possibility of melted aluminium sticking to the grinding disc …
 |
Depressed Centre Stone Grinding Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Use in more→stock removal applications on stone and concrete. By presenting the disc to the workpiece at an angle of 45º, the most efficient results are achieved. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefullyWear goggles to guard against flying chips or dustInspect the condition of the wheel frequentlyAdjus
 |
Impressive Removal Rate - The X551 Expert for Metal has an impressive material removal rate on metal surfaces. The zirconia alumina and semi-friable aluminium oxide abrasive grit blend delivers a bril more→liant removal rate and lifetime on metal applications. Furthermore, its highly robust X-cloth with stable backing ensures durability and steady performances on tough surfaces. The grit is bonded using fully synthetic resin on X-cloth for optimal sanding behaviour. It is intended for deburring and welding preparation on carbon steel, mild steel, aluminium, non-ferrous metals and cast iron. It is also ideal for removing discolouration, stock and surface imperfections. The X551 Expert for Metal is …
 |
Measuring 115mm in diameter and featuring a 22.23mm bore size, this diamond blade is specifically designed for compatibility with angle grinders, providing optimal performance and extensive coverage. more→The continuous rim design ensures smooth and clean cutting action, making it ideal for a variety of tile materials, including ceramic, porcelain, and stone. Crafted with high-quality diamonds embedded in the continuous rim, this blade excels in delivering precise and chip-free cuts through delicate tile surfaces. The robust construction ensures longevity, providing you with a reliable tool for repeated use on your tiling projects. Features & Benefits • Continuous rim for fine cutting of ceramic …
 |
These Makita Tungsten Carbide Grit Blades for X-LOCK grinders are suitable for cutting a variety of materials including plaster board, PVC, FRP & copper. Supports the X-LOCK system which allows for sa more→fe and easy disc installation and removal. Specifications • Diameter: 115 mm • Fitting: X-LOCK • Thickness: 2mm • Pack Quantity: 1 Features & Benefits • Suitable for cutting a variety of materials including plaster board, PVC, FRP & copper • Supports the X-LOCK system which allows for safe and easy disc installation and removal
 |
This premium-quality resin bonded zirconium oxide flap disc offers enhanced cutting performance and efficiency. It has a self-sharpening feature which increases high stock removal and durability. The more→strong plastic backing allows increased flexibility and fast cutting action on medium to high pressure applications. The M14 connection allows for the quick changing of discs. The plastic backing can be trimmed to extend service life. Designed for contoured and flat-edged surfaces. Ideal for sanding, grinding, removing rust and weld preparation of metal, carbon steel, stainless steel, sheet metal, wood and plastic. Compatible with 115mm angle grinders including Stock No. 56488.
Wire & Cup Brushes214
 |
Price from £5.95
Compare prices5→Compare prices and buy Bosch 0.3mm Crimped Inox Steel Wire Brush 50mm 6mm Shank 2608622117
Fine Finish on Stainless Steel - The Wire Cup Brush provides a good fine surface finish. It is fitted with crimped wire for light-to-medium
 |
Price from £7.41 up to £9.36
Compare prices6→Compare prices and buy Draper Twist Knot Wire Cup Brush, 60mm, M14
Manufactured from 0.5mm hardened steel wire. Designed for use with angle grinders. M14 thread. Carton packed.
 |
Price from £5.95
Compare prices3→Compare prices and buy BlueSpot Twist Knot Wire Cup Brush 100mm M14 Thread 19216
BlueSpot Tools Twist Knot Cup Brushes are manufactured from hardened steel wire for increased durability. Twisted steel filaments provide quick and efficient cleaning action. Ideal for removal of dirt more→, paint, rust, scale, slag, concrete and other hardened materials.This BlueSpot Tools Twist Knot Cup Brush has the following specifications: Diameter: 100mm (4in) / M14 x 2 Fitting.Max. Safe Speed: 8500 RPM.Additional Information:&bu
 |
Price from £11.75 up to £16.95
Compare prices5→Compare prices and buy Bosch X Lock Knotted Steel Wire Cup Brush 0.35mm 75mm X-Lock 2608620726
Aggressive Cleaning on Metal - The X-LOCK Heavy for Metal Cup Brush, Knotted Wire provides an aggressive cleaning performance. It is fitted with knotted wire for heavy-duty cleaning applications on me more→dium-to-large steel surfaces. It is suitable for use with X-LOCK angle grinders. Changing brushes is fast and convenient thanks to the keyless X-LOCK system. Click it on with X-LOCK – the fastest accessory-chang
 |
Price from £3.49 up to £4.18
Compare prices4→Compare prices and buy Sealey Flat Wire Brush 75mm 6mm Shank SFB75
Suitable for use with power drills. Ø6mm Shaft. Crimped brassed steel filaments add extra rigidity and cleaning power. Features and Benefits • Suitable for use with power drills. Ø6mm Shaft. • Crimpe more→d brassed steel filaments add extra rigidity and cleaning power. • Model No. SFB75 Specifications Model No SFB75 Brand: Sealey Diameter: Ø75mm Maximum Speed: 4500rpm Nett Weight: 0.08kg Shaft Diameter: Ø6mm
 |
Price from £7.23 up to £9.11
Compare prices6→Compare prices and buy Draper Crimped Wire Cup Brush, 80mm, M14
Manufactured from 0.3mm hardened brassed steel wire. Designed for use with angle grinders. M14 thread. Display packed.
 |
Price from £14.95
Compare prices3→Compare prices and buy Lessmann 0.3 Steel Wire Cup Brush 50mm 6mm Shank LES435162
The Lessmann Cup Brush is fitted with 6mm shank and is ideal for working on medium to large areas. They are generally used for the removal of rust, paint, dirt or scale, and for polishing.Diame
 |
Price from £5.95 up to £5.99
Compare prices7→Compare prices and buy Bosch 0.3mm Crimped Steel Wire Pencil Brush 25mm 6mm Shank 1609200269
Fine Finish on Steel - The End Brush provides a good fine surface finish. It is fitted with crimped wire for light- to medium-duty cleaning applications on small steel surfaces. Its shape makes it ide more→al for cleaning work in very hard-to-reach areas such as in corners and the inside of pipes and profiles. The end brush is also suitable for removing rust, roughing, matt sanding and paint stripping. It is intended for use with drills with a 6-mm shank. Brush wires are available in different thicknesses for variable levels of abrasive needs. Thicker wires are more aggressive, producing a coarser yet faster surface finish, while thinner wires deliver finer, smoother surface results. Cylindrical shank …
Important!
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
