Einhell Expert TE-AG 18/115 Q Li (2x5.2 Ah)
Cutting Discs379
 |
Porcelain Series Diamond Blades for cutting ceramic, porcelain, granite, porcelain based paving and marble. Wet cutting is recommended for a longer blade life and dust suppression, but they can also b more→e used dry. The long-lasting, 10mm deep, continuous sintered rim enables fast and clean cuts. All blades have a centre core reinforcement plate that prevents the blade de-tensioning to increase blade life and reduce vibration. Conforms to EN 13236. Features: 10mm continuous sintered rim for fast, clean cuts Centre core reinforcement plate for reduced vibration Centre core reinforcement plate for reduced vibration Wet cutting for a longer blade life and dust suppression Conforms to EN 13236 Specifications: …
 |
Depressed Centre Metal Grinding Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Use in s more→tock removal applications on ferrous and non-ferrous metal. By presenting the disc to the workpiece at an angle of 45º, the most efficient results are achieved. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted. SAFETY TIPS Read the manufacturer's instructions carefullyWear …
 |
Depressed Centre Stone Cutting Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Depresse more→d centre cutting discs have been developed to make angle grinders more versatile in use by allowing better access in some applications. Stone cutting discs must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefullyWear goggles to guard against flying chips or dustInspect the …
 |
Tub of 10 cutting discs for inox with an extra thin kerf and flat centreThe Makita D-18764-10 is a tin of 10 cutting discs with a 115mm diameter and a 22.23mm bore. These quality stainless steel cutti more→ng discs give an extra thin kerf as they are only 1.2mm thick. Designed specifically for cutting stainless steel - the perfect cutting finish every time.Features:
- Designed for cutting stainless steel / inox / aluminium - extrusions, welds, sections, trunking, pipes
- Flat centreSpecifica
- Blade Diameter: 115mm
- Bore Size: 22.23mm
- Thickness: 1.2mm
- Grit: WA60T-BF
- Max Speed: 13290 min-1
- Designed for cutting stainless steel / inox / aluminium - extrusions, welds, sections, trunking, pipes
- Flat centreSpecifica
- Blade Diameter: 115mm
- Bore Size: 22.23mm
- Thickness: 1.2mm
- Grit: WA60T-BF
- Max Speed: 13290 min-1
 |
• Cuts through the toughest of materials including reinforced concrete, steel and cast iron.Cuts through the toughest of materials including reinforced concrete, steel and cast iron.Technical Specific more→ation:Bore: ø22mmDisc Size: ø115mm(
 |
4.08Buy!
£
£
Zoro.co.uk
Delivery: in United Kingdom
Report
Suitable for cutting most type of building materials.
 |
Impressive Lifetime and Safety - The Expert for Metal Grinding Disc delivers an impressively long lifetime on metal with maximum safety. Its premium aluminium oxide abrasive grain, selected functional more→fillers and additives in a modern phenol resin bond matrix are particularly suited for metal applications. Furthermore, its precision-manuf
 |
• General-purpose flat cutting disc recommended for use with Sealey and other leading makes of grinding and cutting power tools.• Pack of 50.General-purp
Wire & Cup Brushes320
 |
Price from £25.95
Compare prices3→Compare prices and buy Lessmann Knot End Wire Brush 22mm 6mm Shank 454278
The Lessmann Knot End Brushes are fitted with a 6mm shank. When the brush is in rotation it will open up and increase in diameter. This enables the operator to work in hard to reach areas such as dril more→led holes and recesses of all kinds.The Lessmann Knot End Brush With Shank has the following specification: Diameter: 22mm.Wire: 0.35 Steel.Additiona
 |
Price from £6.85 up to £9.11
Compare prices7→Compare prices and buy Draper Crimped Wire Cup Brush, 80mm, M14
Manufactured from 0.3mm hardened brassed steel wire. Designed for use with angle grinders. M14 thread. Display packed.
 |
Price from £2.95
Compare prices3→Compare prices and buy Faithfull Point End Crimped Wire Brush 12mm 6mm Shank WBSI12P
This Faithfull Wire End Brush is suitable for cleaning paint or deburring moulds or castings in hard-to-reach areas such as cylinders. The brush has crimped steel wire and is designed for light to med more→ium-duty applications. Suitable for use in industrial power tools at higher speeds. The FAIWBSI12P Wire End Brush has the following specifications: Type: Pointed end. Face diameter: 12/60 mm x 20 mm. Shaft: 6 mm (1/4in). Wire: 0.3 mm steel. Conforms to ISO 9001. and DIN EN1083-1 and 2.Additional Information:&bu
 |
Price from £9.42 up to £14.95
Compare prices5→Compare prices and buy Bosch 0.5mm Knotted Conical Steel Wire Wheel Brush 100mm M14 Thread 260862
Coarse Finish on Metal - The Heavy for Metal Bevel Brush delivers an extra-coarse surface finish. Its conical bevel brush is fitted with knotted wire for heavy-duty cleaning applications in hard-to-re more→ach areas. It is suitable for cleaning smaller steel surfaces and in grooves or on edges at high circumferential speeds. Ideal for use in metal, this brush is also suitable for removing heavy rust, paint stripping, deslagging, deburring, descaling and cleaning welding seams. It is intended for use with angle grinders with an M14 thread. Brush wires are available in different thicknesses for variable levels of abrasive needs. Thicker wires are more aggressive, producing a coarser yet faster surface …
 |
Price from £5.49 up to £6.71
Compare prices5→Compare prices and buy Sealey Brassed Steel Cup Brush Ø75mm M10 x 1.5mm
• Suitable for use with power tools up to the maximum rated rpm.• Crimped brassed steel filaments add extra rigidity and cleaning power.Suitable for use with power tools up to the maximum rated rpm. C more→rimped brassed steel filaments add extra rigidity and cleaning power.• Suitable for use with power tools up to the maximum rated rpm. • Crimped brassed steel filaments add extra rigidity and cleaning power. • Model No. CBC75Technical Specification:D
 |
Price from £4.91 up to £5.36
Compare prices6→Compare prices and buy Sealey Flat Wire Brush Stainless Steel 75mm with 6mm Shaft
• Flat wire brush.• Crimped stainless steel filaments.• Shaft: ø6mm.• Diameter: ø75mm.• Maximum Speed: 4500rpm.Flat wire brush with crimped stainless steel filaments, 75mm width and a 6mm sh more→aft.• Flat wire brush. • Crimped stainless steel filaments. • Shaft: ø6mm. • Diameter: ø75mm. • Maximum Speed: 4500rpm. • Model No. SFBS75Technical Specification:D
 |
Price from £3.95
Compare prices3→Compare prices and buy Faithfull Point End Crimped Wire Brush 23mm 6mm Shank WBSI23P
This Faithfull Wire End Brush is suitable for cleaning paint or deburring moulds or castings in hard-to-reach areas such as cylinders. The brush has crimped steel wire and is designed for light to med more→ium-duty applications. Suitable for use in industrial power tools at higher speeds. Suitable for cleaning paint or deburring of moulds or castings in hard-to-reach areas such as cylinders. Can be used in industrial power tools at higher speeds. Type: Pointed end Face diameter: 23/60 mm x 25 mm Shaft: 6 mm (1/4in) Wire: 0.3 mm steel Conforms to ISO 9001. and DIN EN1083-1 and 2 Maximum rpm 20,000.Addition
 |
Price from £21.95
Compare prices3→Compare prices and buy Lessmann 0.3 Steel Wire Cup Brush 70mm 6mm Shank LES437162
The Lessmann Cup Brush is fitted with 6mm shank and is ideal for working on medium to large areas. They are generally used for the removal of rust, paint, dirt or scale, and for polishing.Diame
Important!
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
