Einhell Expert TE-AG 18/115 Q Li Solo (4431165)
Cutting Discs269
 |
These premium-quality resin-bonded zirconium oxide flap discs offer enhanced cutting performance and efficiency. They have a self-sharpening feature, which increases high stock removal and durability. more→The strong X-weight polyester-cotto
 |
Depressed Centre Stone Grinding Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Use in more→stock removal applications on stone and concrete. By presenting the disc to the workpiece at an angle of 45, the most efficient results are achieved. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefullyWear goggles to guard against flying chips or dustInspect the condition of the wheel frequentlyAdjus
 |
• Zirconium flap discs for descaling, derusting, weld preparation, weld cleaning and general surface preparation.• More durable than normal sanding discs.• Abrasive flaps are attached to rigid disc wi more→th epoxy adhesive - does not require backing pad.• Depressed centre discs suitable for electric and air tools.Technical SpecificationBo
 |
• For light grinding work. Thanks to the flexibility of the disc, it is ideally suited to working on curved surfaces. Other advantages of the disc: less vibration and noise development, cool grin more→ding (less heat discolouration)
 |
The Faithfull Aluminium Oxide Flap Discs are suitable for heavy-duty applications. The 72 flaps enables fast stock removal with minimal risk of damage through gouging or discolouration. A lightweight more→disc design reduces operator fatigue, and is easier to control, providing better quality and consistency of your surface finish. The layered disc is cooler, and quieter than typical grinding/abrasi
 |
Up to 3x more precise than a standard ceramic diamond disc - The tiles used in modern construction are often large, very hard and expensive. Cutting them to a high standard every time is therefore cru more→cial yet difficult. The EXPERT HardCeramic Tile-Cutting Disc uses Diamond Technology and a range of design features to deliver the best results consistently, even in the hardest ceramics. Bosch Diamond Technology, which brings new diamonds to the surface to ensure the rim is always sharp, allows our ceramic cutting disc to cut smoothly through even hard tiles. The thin, strong body and continuous fluted rim offer maximum control and keep vibration low for a high quality, chip-free cut. The Bosch …
 |
The CorePlus Mortar Raking Diamond Blade has hard, 10mm tall segments, specifically designed for removing a range of mortars prior to pointing. A precision-engin
 |
Expert For Concrete Long Life Diamond Grinding HeadFeatures:Ex
Wire & Cup Brushes219
 |
Price from £18.95
Compare prices3→Compare prices and buy Lessmann 0.35 Steel Wire Knot Cup Brush 65mm M14 x 2.0 Thread
Knot Cup Brushes are for heavy-duty use for the preparing of metal surfaces before painting, and the removal of slag, rust, scale or concrete waste.Lessmann knotted brushes are filled with a special s more→teel wire of high tensile strength in order to meet the demands of this type of brush. Products marked with a * have a bridle fitted which an be removed to expose a further 20mm of useable wire.Diameter. 65mm.Bore. M14.Wire Gauge. 0.35.Wire Type. Steel.Max. R.P.M. 12,500.Addition
 |
Price from £4.49 up to £6.29
Compare prices6→Compare prices and buy Sealey Flat Wire Brush Ø100mm with 6mm Shaft
• Suitable for use with power drills.• ø6mm Shaft.• Crimped brassed steel filaments add extra rigidity and cleaning power.Suitable for use with power drills. ø6mm Shaft. Crimped brassed stee more→l filaments add extra rigidity and cleaning power.• Suitable for use with power drills. ø6mm Shaft. • Crimped brassed steel filaments add extra rigidity and cleaning power. • Model No. SFB100Technical Specification:D
 |
Price from £15.95
Compare prices3→Compare prices and buy Lessmann 0.5 Steel Wire Knot Cup Brush 65mm M14 x 2.0 Thread
Knot Cup Brushes are for heavy-duty use for the preparing of metal surfaces before painting, and the removal of slag, rust, scale or concrete waste.Lessmann knotted brushes are filled with a special s more→teel wire of high tensile strength in order to meet the demands of this type of brush. Products marked with a * have a bridle fitted which an be removed to expose a further 20mm of useable wire.Diameter. 65mm.Bore. M14.Wire Gauge. 0.50. Wire Type. Steel.Max. R.P.M. 12,500.Addition
 |
Price from £11.95 up to £13.46
Compare prices5→Compare prices and buy Sealey Brassed Steel Cup Brush Ø125mm M14 x 2mm
• Suitable for use with power tools up to the maximum rated rpm.• Crimped brassed steel filaments add extra rigidity and cleaning power.Suitable for use with power tools up to the maximum rated rpm. C more→rimped brassed steel filaments add extra rigidity and cleaning power.• Suitable for use with power tools up to the maximum rated rpm. • Crimped brassed steel filaments add extra rigidity and cleaning power. • Model No. CBC125Technical Specification:D
 |
Price from £4.49
Compare prices5→Compare prices and buy Bosch 0.2mm Crimped Brass Wire Brush 50mm 6mm Shank
Fine Finish on Steel - The Wire Cup Brush delivers an extra-fine surface finish. This Wire Cup Brush is fitted with brass-coated crimped wire for light-to-medium
 |
Price from £3.49 up to £3.68
Compare prices5→Compare prices and buy Sealey Flat Top Decarbonising Brush 25mm
• Flat trimmed brush with brassed and crimped filaments for extra rigidity.• ø6 x 26mm Shaft.• Trim Length/ø: 28/25mm.Flat trimmed brush with brassed and crimped filaments for extra rigidity more→. ø6 x 26mm Shaft.• Flat trimmed brush with brassed and crimped filaments. • ø6 x 26mm Shaft. • Trim Length/ø: 28/25mm. • Model No. VS1803Technical Specification:N
 |
Price from £12.92 up to £16.39
Compare prices6→Compare prices and buy Draper Twist Knot Wire Cup Brush, 80mm, M14
Manufactured from 0.5mm hardened steel wire. Designed for use with angle grinders. M14 thread. Carton packed.
 |
Price from £5.95 up to £5.99
Compare prices7→Compare prices and buy Bosch 1609200269 Pencil Brush for Drills and Straight Grinders
As a leading manufacturer for power tools accessories, Bosch offers the ideal accessories for virtually all applications
It is our aim to develop appropriate accessories for more efficient work more→ing
The research and development departments at Bosch work to develop and optimize accessories in line with the needs of users
It is our aim to develop appropriate accessories for more efficient work more→ing
The research and development departments at Bosch work to develop and optimize accessories in line with the needs of users
Important!
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
