Fein CCG 18-115 Bl Select 71200162000
Cutting Discs334
 |
• General-purpose flat cutting disc recommended for use with Sealey and other leading makes of grinding and cutting power tools.General-p
 |
Impressive Removal Rate - The X551 Expert for Metal has an impressive material removal rate on metal surfaces. The zirconia alumina and semi-friable aluminium oxide abrasive grit blend delivers a bril more→liant removal rate and lifetime on metal applications. Furthermore, its highly robust X-cloth with stable backing ensures durability and steady performances on tough surfaces. The grit is bonded using fully synthetic resin on X-cloth for optimal sanding behaviour. It is intended for deburring and welding preparation on carbon steel, mild steel, aluminium, non-ferrous metals and cast iron. It is also ideal for removing discolouration, stock and surface imperfections. The X551 Expert for Metal is …
 |
Lasts up to 4x longer than a standard multi material diamond disc - On modern construction sites you need to cut a wide variety of hard materials, and these take their toll on tools. The EXPERT MultiM more→aterial Disc is the ideal accessory for busy construction professionals needing to cut concrete, brick, roofing tiles and reinforced concrete - because it simply keeps doing the job for longer. The high segments on this cutting disc are made from an advanced matrix of metal and diamonds, which is designed to stay razor sharp. These segments are laser-welded onto a hard steel body; and the sides are fluted to remove dust for efficiency and longevity. This mix of optimum diamond grits and advanced …
 |
• Suitable for dry-cutting of most types of building materials. For best results, avoid extremely hard or abrasive materials.Suita
 |
The Makita Ultra Thin Metal Cutting Disc is a high quality stainless steel cutting disk with an extra thin kerf. Desiged for cutting stainless steel the disk will give a perfect cutting finish everyti more→me. Specifications • Blade Diameter: 115mm • Bore Size: 22.23mm • Thickness: 1.2mm Features and Benefits • Designed for cutting stainless steel / inox / aluminium - extrusions, welds, sections, trunking, pipes
 |
Depressed Centre Metal Cutting Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Discs wit more→h a 1.8mm thickness permit fine cutting where necessary on stainless steel and high grade metals. They have been developed to make angle grinders more versatile in use by allowing better access in some applications. Metal cutting discs must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure …
 |
The Marcrist MR350 Mortar Raker Diamond Blade is specifically designed for efficient and precise removal of mortar between bricks, blocks, and other masonry surfaces. This blade ensures fast, clean, a more→nd accurate raking of mortar joints, making it an essential tool for repointing and renovation work. With high-quality diamond segments, the MR350 offers superior cutting performance, even in the toughest conditions. Its robust construction minimises wear, extending the blade’s lifespan and maintaining its sharpness over prolonged use. The optimised segment design allows for smooth, vibration-free operation, reducing fatigue and increasing productivity on the job site. Suitable For • Breeze Bl…
 |
The Makita A60V Thin Stainless Steel Cutting Discs are expertly crafted for precision cutting of stainless steel and other metals. Featuring a thin 1mm profile, these discs ensure fast, clean cuts wit more→h minimal material loss and reduced burr formation, making them ideal for detailed metalwork. Constructed with high-quality materials, the Makita A60V discs offer exceptional durability and long-lasting performance. Their superior bonding and advanced grain technology provide consistent cutting power, ensuring optimal results throughout the disc's lifespan. Designed for use with angle grinders, these versatile cutting discs are perfect for a wide range of metal cutting applications. Specifications …
Wire & Cup Brushes324
 |
Price from £2.95 up to £6.59
Compare prices4→Compare prices and buy BlueSpot Crimped Steel Wire Cup Brush 65mm M14 Thread
The BlueSpot Tools Steel Wire Cup Brush is manufactured from hardened steel wire for increased durability. Ideal for preparing metal surfaces for welding and painting.This BlueSpot Tools Steel Wire Cu more→p Brush has the following specification: Wire: 0.3mm.Diameter: 65mm (2 1/2in) / M14 x 2 Fitting.Max. Safe Speed: 12500 RPM.Additional Information:&bu
 |
Price from £3.49
Compare prices3→Compare prices and buy Faithfull Crimped Wire Wheel Brush 100mm 6mm Shank
This Faithfull crimped steel Wire Circular Brush is designed for light to medium-duty applications such as cleaning metal surfaces prior to welding or painting. Fitted with a 6mm (1/4in) shank and des more→igned to operate with power tools up to a maximum of 4,500/min. Shaft: 6mm (1/4in). Wire: 0.30mm crimped steel wire. Conforms to ISO 9001 and DIN EN1083-1 and 2 standards.Diame
 |
Price from £40.95
Compare prices3→Compare prices and buy Lessmann Crimped Stainless Steel Wire Cup Brush 80mm M14 x 2.0 Thread
The Lessmann Cup Brushes are filled with crimped wire and are ideal for working on large surfaces. They can also be used for the removal of rust, paint, dirt or scale and for polishing. A range of siz more→es and wire styles are available.Diame
 |
Price from £3.49 up to £3.68
Compare prices5→Compare prices and buy Sealey Flat Top Decarbonising Brush 25mm
• Flat trimmed brush with brassed and crimped filaments for extra rigidity.• ø6 x 26mm Shaft.• Trim Length/ø: 28/25mm.Flat trimmed brush with brassed and crimped filaments for extra rigidity more→. ø6 x 26mm Shaft.• Flat trimmed brush with brassed and crimped filaments. • ø6 x 26mm Shaft. • Trim Length/ø: 28/25mm. • Model No. VS1803Technical Specification:N
 |
Price from £4.95
Compare prices4→Compare prices and buy Stanley Crimped Steel Wire Wheel Brush 50mm 6mm Shank
These Stanley crimped wire wheels are ideal for cleaning and preparing surfaces. They are designed for use in drill chucks and can be used with standard corded or cordless drills. The high tensile ste more→el wire is heat treated for durability. An innovative internal holding plate construction helps to reduce wire movement for increased control and longer product lifetime. Features & Benefits • For use with electric drills • Suitable for corded and cordless machines • Ideal for cleaning and surface preparation Specifications • Wheel Diameter: 50mm • Wheel Thickness: 10mm • Shank Diameter: 6mm
 |
Price from £12.99 up to £26.95
Compare prices7→Compare prices and buy Bosch Pt X-lock Heavy Metal 75x0.5x125 M Brush Cup 2608620727
X-Lock Heavy For Metal Cup Brush, Knotted Wire Provides An Aggressive Cleaning Performance It Is Suitable For Use With X-Lock Angle Grinders.Featur
 |
Price from £22.99 up to £24.95
Compare prices4→Compare prices and buy Lessmann Knot Wheel Brush 115 x 14mm 22.2mm Bore, 0.50 Steel Wire LES472211
The Lessmann Knot Wheel Brushes are for grinders, angle grinders and stationary machines, used in the preparation and re-working of bolt fillet and butt welds. They remove scale, rust, paint, slag, ru more→bber residue and can be used for de-burring. They are filled with a special high tensile strength steel wire in order to meet the exacting requirements during use.
 |
Price from £4.49
Compare prices5→Compare prices and buy Bosch 0.3mm Crimped Steel Wire Wheel Brush 50mm 6mm Shank
Fine Finish on Steel - The Wire Wheel provides a good fine surface finish. Fitted with crimped wire for light- to medium-duty cleaning applications on small surfaces, it is ideal for removing annealin more→g colour on welded seams. The wire wheel is suitable for cleaning work at high circumferential speeds on smaller steel surfaces, edges or in grooves. Moreover, it is suitable for removing rust, roughing, mat sanding and paint stripping. It is intended for use with drills with 6-mm shank. Brush wires are available in different thicknesses for variable levels of abrasive needs. Thicker wires are more aggressive, producing a coarser yet faster surface finish, while thinner wires deliver finer, smoother …
Important!
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
