Fein WSG 17-150 P 72221160240
Cutting Discs149
 |
Milwaukee Heavy Duty Demolition Reciprocating Saw Blades. Improved tooth geometry for best speed and double the lifetime. Bi-metal quality cutting teeth with 8% cobalt giving the ultimate in performan more→ce and lifetime. TOUGH NECK: Stamped indentations around the reception strengthens the blade at its weakest point. Slim 0.90 mm thick blade body optimised for maximum speed and flexibility. Specifications • Blade Length: 150mm • Teeth per Inch: 24 • Max. Cutting Capacity (Steel Plate): 0.5-3mm • Max. Cutting Capacity (Inox): 0.5-3mm • Max. Cutting Capacity (Metal Pipe): 8-100mm • Max. Cutting Capacity (Non Ferrous Metals): 0.5-3mm • Max. Cutting Capacity (Steel): …
 |
IRWIN® Bi-Metal Sabre Saw Blades cut all metals including non ferrous pipe conduit stainless and sheet metal. Superior construction and design make them faster cutting and longer lasting. Label more→ling on the blade makes it easy to identify the right blade for the right application. Suitable for use with materials 1.5 to 10mm (1/16 to 3/8in) thick dependent on the TPI of the blade.Pack of 5 IRWIN® 614R Metal Cutting Sabre Saw Blades 150mm 14 TPIPTDIRW105041
 |
These Faithfull Wood Cutting Sabre Saw Blades are made from HCS carbon steel blades making them specially adapted for wood working in terms of hardness and resistance. They are also highly suitable fo more→r other relatively soft materials. Manufactured for precision and stability when cutting. Their design and tooth geometry vary with regard to the speed and cutting application which they are intended to perform. Selecting the correct sabresaw blade for the task at hand is essential if the material is to be cut successfully and the desired result achieved. Will fit Sabresaws from the following brands: AEG Black & Decker Bosch DeWalt Elu Fein Hitachi Makita Metabo Milwaukee Ryobi and most …
 |
Lasts up to 50x longer than a Bi-Metal blade in tough materials - Cutting thin sheet metal and thin wall pipes is a tough job, but with a good recip saw blade you can manage: the real problems start w more→hen you cut stainless steel. This tough, high-alloy steel is an obstacle to construction or renovation workers and destroys blades. Bosch Carbide Technology consigns these problems to the past. The EXPERT ‘Thin Tough Metal’ is a leap forward in recip saw blade development, where the hardest metal is integrated into a tooth design optimised for steel sheets and pipes. The teeth are ground to a fine geometry that allows even thin sheets of stainless steel to be cut smoothly. Ideal for metal workers, plu…
 |
16.49Buy!
£
£
BricoINN
Delivery: in United Kingdom
Report
Features: - Carbide Teeth For Durability.- Flat Tooth (Ft) Geometry For Clean And Precise Cuts In Various Materials.- Expansion Slots For Low Vibration As Well As Noise And Heat Reduction.- Fits Stand more→ard Circular Saws From Most Brands.Specific
 |
Premium saw blades made especially for cordless saws. Blades for sheet metal cutting, with the most popular cordless circular saw models are now available all with Makita quality! Specifications &bull more→; Bore: 20mm • Diameter: 150mm • Kerf: 1.4mm • Rake: -15° • Thickness: 1.1mm • Tooth Count: 52 • Material Type: Sheet metal • Machine Type: Cordless saw DCS551 Features and Benefits • Ultra-thin, perfectly tensioned steel plates for true run • Extends battery life • Precision honed, high-grade carbide for easy, smooth cuts and long life • Tooth configurations to meet specific cutting, material and thickness applications
 |
Reliable Cuts - The Standard for Universal Turbo Diamond Cutting Disc delivers reliable cuts in universal building materials. Its diamond matrix is engineered for cutting various construction componen more→ts, resulting in well-formed cutting edges. These high-qualitity standards are ensured by the Bosch diamond competence centre in Switzerland. Use this disc when cutting building materials such as concrete and masonry. It is compatible with angle grinders. With 22.23 mm bore for standard locking nut angle grinders. Features and Benefits • Reliable Cuts in Universal Building Materials • Standard for Universal Turbo Diamond Cutting Disc delivers reliable cuts in universal building materials …
 |
Lasts up to 50x longer than a Bi-Metal blade in tough materials - What’s even tougher than a Bosch carbide blade? A Bosch carbide blade with reinforced teeth, of course! Sometimes, the abuse endured b more→y a blade in demolition jobs is so great that the teeth get torn off. So Bosch made them even stronger. For the toughest demolition work, Bosch developed the EXPERT ‘Wood with Metal Demolition’. The progressive pitch ensures it isn’t surprised by any thickness changes in material; the individually reinforced tooth shoulders withstand the worst impacts of embedded high strength steel in wood; and it is all backed up by the ability of carbide to tear through anything in its way. When you absolutely have to …
Wire & Cup Brushes309
 |
Price from £5.86 up to £8.95
Compare prices6→Compare prices and buy Draper 41447 Steel Twist-Knot Wire Cup Brush 65Mm M14 each 1
This twist-knot wire cup brush is designed for heavy-duty work and delivers aggressive stock removal on ferrous metals. The brush is made from hardened steel wire which gives a high level of durabili more→ty and performance. The twist-knots are tight for a longer life and the twisted construction is perfect for quicker material removal in deburring and cleaning tasks. The cup shape works flat to the surface to cover a large surface area. Compatible with most angle grinders with an M14x2 connection.PTDD
 |
Price from £13.95
Compare prices5→Compare prices and buy Bosch 0.3mm Crimped Brass Coated Wire Cup Brush 70mm M14 Thread 1608614020
Extra-Fine Finish - The Clean for Metal Wire Cup Brush delivers an extra-fine surface finish. The wire cup brush is fitted with brass-coated crimped wire for light- to medium-duty cleaning application more→s. It is suitable for removing coatings, rust and paint stripping on medium to large metal and non-ferrous metal surfaces. This wire cup brush is also suitable for roughing, matt sanding, cleaning formwork boards and facings. It is intended for use with angle grinders. The brass-coated wires on the brush provide protection against corrosion. Brush wires are available in different thicknesses for variable levels of abrasive needs. Thicker wires are more aggressive, producing a coarser yet faster …
 |
Price from £6.49
Compare prices6→Compare prices and buy Sealey SFBS100 Flat Wire Brush Stainless Steel Ø100Mm Ø6Mm Shaft
Flat wire brush with crimped stainless steel filaments Ø100mm width and a Ø6mm shaft.Ø100mm Flat Wire Brush Ø6mm Shaft• Flat wire brush.• Crimped stainless steel filaments.• Shaft: Ø6mm.• Diameter: Ø more→100mm.• Maximum Speed: 4500rpm. • Model No. SFBS100Model No: SFBS100:Brand: Sealey:Diameter
 |
Price from £6.42 up to £14.99
Compare prices6→Compare prices and buy Faithfull Wire Cup Brush 75Mm Xlock, Green FAIWBC75XL
This X-LOCK Crimped Wire Cup Brush is suitable for light to medium-duty applications when working with steel. The brush is ideal for removal of paint, coatings and general surface preparation of stain more→less steel. The X-LOCK quick change system ensures a fast, reliable and effective one click change between tools when used with a compatible angle grinder. Features: X-LOCK quick change system for fast change between tools 0.3mm crimped steel wire 0.3mm crimped steel wire Ideal for removal of paint, coatings and surface prep Specifications: Dimensions: H:11.5 x W:6.0 x D:9.5 cm Colour: Green Guarantee:5 years Material: Metal Model Number: FAIWBC75XL
 |
Price from £3.18 up to £3.49
Compare prices6→Compare prices and buy Sealey SFB75 Flat Wire Brush Ø75Mm Ø6Mm Shaft
Suitable for use with power drills. Ø6mm Shaft. Crimped brassed steel filaments add extra rigidity and cleaning power.Ø75mm Flat Wire Brush Ø6mm Shaft• Suitable for use with power drills. Ø6mm Shaft.• more→Crimped brassed steel filaments add extra rigidity and cleaning power.• Model No. SFB75Model No: SFB75:Brand: Sealey:Diameter
 |
Price from £7.49
Compare prices5→Compare prices and buy Bosch 0.35mm Knotted Steel Wire Pencil Brush 10mm 6mm Shank 2608622115
Coarse Finish on Steel - The End Brush provides a good coarse surface finish. Fitted with knotted wire, it is ideal for medium-duty cleaning applications on small steel surfaces. Its shape makes it id more→eal for cleaning work in very hard-to-reach areas such as in corners and the inside of pipes and profiles. The brush is also suitable for removing heavy rust and varnish as well as stripping paint. It is intended for use with drills with a 6-mm shank. Brush wires are available in different thicknesses for variable levels of abrasive needs. Thicker wires are more aggressive, producing a coarser yet faster surface finish, while thinner wires deliver finer, smoother surface results Cylindrical shank …
 |
Price from £14.95
Compare prices5→Compare prices and buy Bosch 0.5mm Knotted Conical Steel Wire Wheel Brush 100mm M14 Thread 2608622011
Coarse Finish on Metal - The Heavy for Metal Bevel Brush delivers an extra-coarse surface finish. Its conical bevel brush is fitted with knotted wire for heavy-duty cleaning applications in hard-to-re more→ach areas. It is suitable for cleaning smaller steel surfaces and in grooves or on edges at high circumferential speeds. Ideal for use in metal, this brush is also suitable for removing heavy rust, paint stripping, deslagging, deburring, descaling and cleaning welding seams. It is intended for use with angle grinders with an M14 thread. Brush wires are available in different thicknesses for variable levels of abrasive needs. Thicker wires are more aggressive, producing a coarser yet faster surface …
 |
Price from £3.22 up to £4.95
Compare prices6→Compare prices and buy Draper 41436 Steel Crimped Tube Brush 28Mm each 1
This wire tube brush is designed for cleaning tubes gratings sleeves and cylinders made from ferrous metals. The bristles are made from hardened steel wire which gives a high level of durability an more→d performance. The brush is strong enough to provide reliable performance and the crimping is flexible to tackle recessed areas and irregular surfaces. Fitted with a 6mm twisted shank. Compatible with most drill drivers and drills with a 13mm chuck.PTDDRPDIR
Important!
Compatibility with specific models Grinders & Polishers should be confirmed with the online store manager directly before purchase.
Compatibility with specific models Grinders & Polishers should be confirmed with the online store manager directly before purchase.
