Festool Domino DF 500 Q-Set 574427
Diamond Core Bits & Milling Cutters1468
 |
Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. Sp more→ecifications • Shank Diameter: 12 mm • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 50 • Cut Length Imperial: 2 • Overall Length Metric: 93.5 • Type or Grade: Centre tip
 |
The two bearings supplied offer the means of cutting different depths of mouldings. Specifications • Shank Diameter: 1/2 • Dia Metric: 28.5 • Dia Imperial: 1 1/8 • Cut Length Metr more→ic: 14 • Overall Length Metric: 60.5 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 9.5
 |
Trend Professional 1/4in shank bearing guided trimming cutter - 15mm diameter for laminate and template work 15mm diameter X 25mm cutting depth bearing guided profiling cutter, perfect for templating more→and trimming work in timber, laminate and wood based materials. Shank mounted bearing allows good vision of the template for easy and accurate following when hand held routing. 25mm cutting depth for making replicas of components or for rebating with templates. 1/4in shank for easy control in smaller routers with 'K'mark shank to ensure safe working practices. Specifications • Shank Diameter: 1/4 • Dia Metric: 15.9 • Dia Imperial: 5/8 • Cut Length Metric: 25 • Overall …
 |
Ideal for following template. It is advisable that the template is at least 5mm thicker than the cut length of the tool. Specifications • Shank Diameter: 1/2 • Dia Metric: 35 • Dia Imp more→erial: 1 3/8 • Cut Length Metric: 14 • Overall Length Metric: 65 • Bearing Dia Metric: 35 • Radius 1 Metric: 5.2
 |
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications • Shank Diam more→eter: 1/4 • Dia Metric: 15.9 • Dia Imperial: 5/8 • Cut Length Metric: 25 • Overall Length Metric: 57
 |
Clarkson 01PM/03PM standard series multi flute end mills. Made from M42 High Speed Steel with 8% cobalt. Sizes 2.0mm - 20.0mm: Four Flutes Sizes 21.0mm - 38.0mm: Six Flutes Sizes 40.0mm - 50.00mm: Eig more→ht Flutes BS 122/4. Specifications • Milling Diameter: 29mm • Shank Diameter: 25mm • Length of Cut: 46mm • Overall Length: 105mm • Square End Helix Angle: 30° Features and Benefits • Premium grade M24 High Speed Steel with 8% cobalt (HSS Co8) • Screwed shank to BS122/4 • Multidirectiona
 |
High quality 3-flute countersink bit for deburring, chamfering and countersinking. A finely-tuned material elasticity provides for great durability. Perfect chip removal and a low tilt risk ensure ple more→asant working. Cutting section as per DIN 335-C, 90° with 3 cutters. ¼" hexagon, suitable for holders with take-up as per DIN ISO 1173-D 6.3. Features and Benefits • Hex shaft for very good power transfer • Finely-tuned material elasticity for great durability • Very good centring properties • Perfect chip removal • Precise return movement Contents 846 3-flute Countersink Bit, 12.40 x 35 mm
 |
With bearing guided ogees, change profile by using a larger bearing and vary the depth. Specifications • Shank Diameter: 1/2 • Dia Metric: 25.4 • Dia Imperial: 1 • Cut Length Metr more→ic: 15.9 • Cut Length Imperial: 5/8 • Overall Length Metric: 63 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 4
Important!
Compatibility with specific models Routers & Trimmers should be confirmed with the online store manager directly before purchase.
Compatibility with specific models Routers & Trimmers should be confirmed with the online store manager directly before purchase.
