Festool Domino DF 500 Q-Set 576420
Diamond Core Bits & Milling Cutters1538
 |
Creates a corner bead with a step. By making a second pass at 90 degrees a full corner bead can be cut. Two flutes give a clean finish to cut edges. Specifications • Shank Diameter: 1/4 • more→Dia Metric: 31.9 • Dia2 Metric: 28.6 • Overall Length Metric: 58 • Bearing Dia Metric: 16 • Bearing Dia Imperial: 5/8 • Radius 1 Metric: 7
 |
Suitable for use with routers that have an 8mm collet fitted, these 8mm shank cutters can be used for routing a variety of profiles onto the ede of a workpiece, as well as for straight cutting, e.g wh more→en milling out a groove or slot. Supplied in a wooden storage case with a secure closing latch, the set comes with handy pictograms which illustrate the cutting pattern of each bit. Please note these cutters should only be used in a collet that is a true 8mm metric size. Features & Benefits • Versatile router bit set for a variety of routing applications • Fits 8mm collets as often supplied with German machines • Suitable for various Einhell routers, including TC-RO 1155 E, 1255 E,…
 |
They are designed to drill and coutersink simultaneously, a wide variety of materials. Supplied with a HSS slow spiral drill bit. Fully adjustable, a hex key is supplied. Use at drilling speeds more→only. Not suitable for ferrous or non ferrous metals. Please ensure drill flutes are aligned with flutes of countersink. For replacement Twist Drills, use slow spiral type e.g. Refs 501/18 to 501/716. Specifications • Dia Metric: 12.7 • Dia Imperial: 1/2 • Dia2 Metric: 3.96 • Overall Length Metric: 75
 |
Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods. For housing, grooving and mortising. Features 2mm micrograin Tungsten Carbide tips, for cutting the more→most abrasive materials to give extra long life. PTFE coated, indicated by distinctive black colouring. Can be used on hardwood & softwood, fibreboard, plywood and particle board. Etched dimensions on extra long 40mm shanks. Specifications • Shank Diameter: 1/4 • Dia Metric: 15.9 • Dia Imperial: 5/8 • Cut Length Metric: 19 • Overall Length Metric: 60
 |
Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can more→be produced. A full round/bullnose for stair treads can also be produced by taking a second pass from the opposite side of the workpiece. Specifications • Shank Diameter: 1/2 • Dia Metric: 41.1 • Cut Length Metric: 20 • Overall Length Metric: 70 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 14.2 • Radius 1 Imperial: 9/16
 |
Trend Craft Pro 1/2in shank bearing guided flush trimming cutter - 12.7mm diameter Two Flute Carbide tips. 50mm cutting depth for replicating thicker components with templates; ideal for heavier join more→ery and furniture work. Bottom bearing guide for following an edge to trim laminates and veneers for a professional finish. Two flute carbide TCT tips for clean, professional finish on timber, plastic laminates and veneers. PTFE coating to minimise heat and resin build up for increased cutter performance and longevity. 1/2in shank for use in bigger routers and heavier applications with 'K'mark shank to ensure safe working practices. Specifications • Shank Diameter: 1/2 • Dia Metric: …
 |
Clarkson 01PM/03PM standard series multi flute end mills. Made from M42 High Speed Steel with 8% cobalt. Sizes 2.0mm - 20.0mm: Four Flutes Sizes 21.0mm - 38.0mm: Six Flutes Sizes 40.0mm - 50.00mm: Eig more→ht Flutes BS 122/4. Specifications • Milling Diameter: 11mm • Shank Diameter: 12mm • Length of Cut: 19mm • Overall Length: 66.5mm • Square End Helix Angle: 30° Features and Benefits • Premium grade M24 High Speed Steel with 8% cobalt (HSS Co8) • Screwed shank to BS122/4 • Multidirectiona
 |
Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. Sp more→ecifications • Shank Diameter: 1/2 • Dia Metric: 44.5 • Dia Imperial: 1 3/4 • Cut Length Metric: 25 • Cut Length Imperial: 1 • Overall Length Metric: 63
Important!
Compatibility with specific Routers & Trimmers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Routers & Trimmers models should be checked with manager of online store immediately before purchase.
