Festool MFK 700 EQ/B-Plus 574453
Diamond Core Bits & Milling Cutters955
 |
The HSS Countersink Bit, Cylindrical Shank performs smooth countersinking for screws and deburring of holes in soft materials. The ground countersink is made of HSS (high-speed steel) that offers an o more→ptimum surface quality for even work in pliable surfaces. Excellent results in soft materials are made possible by five 90-degree cutting edges that continuously work free of chattering and without leaving burrs. It is suitable for use on wood, plastics and non-ferrous metals and has a cylindrical shank system. Cylindrical shank compatible with three-jaw drill chucks. Features and Benefits • Smooth Countersinking in Soft Materials Specifications Total length: 50mm Shank diameter: 6; 8mm Diameter: …
 |
Eccentric single flute cutters. Cutters are chosen for fast free cutting, when cutting speed takes preference over finish. Cutters with prefix S are Solid Carbide. Cutters of 2.0mm diameter and more→below should have a maximum of 1.0mm depth of cut per pass. Small diameter tools must be handled with care to avoid breakage. Single flute cutters should not be used in eccentric chucks. Specifications • Shank Diameter: 1/4 • Dia Metric: 2 • Dia Imperial: 5/64 • Cut Length Metric: 5 • Overall Length Metric: 43
 |
Miniature bearing cutters ideal for sign-making, musical instrument building and other small intricate projects. Can be used on wood and plastic. Small bearing allows access to tight spaces. Has a more→miniature bearings fitted which have a limited life of approximately 100 linear metres, after which these consumables will need to be replaced. Specifications • Shank Diameter: 1/4 • Dia Metric: 4.8 • Cut Length Metric: 6.3 • Cut Length Imperial: 1/4 • Overall Length Metric: 47 • Bearing Dia Metric: 4.8 • Angle: 90
 |
This Tungsten Carbide tipped cutter is similar to an ovolo cutter and provides a rounded profile along the edge of the material.It differs from ovolo cutters by producing a single step only. Shank: 1/ more→4in. Features: Produces a stepped rounded profile along the edge of the material TCT cutting edges TCT cutting edges Guide pin enables the cutter to follow intricate shapes Differs to Ovolo cutter by producing a single step only Specifications: Dimensions: H:12.0 x W:3.0 x D:5.5 cm Colour: Multi Guarantee:5 years Material: Tungsten Carbide Model Number: FAIRB41
 |
Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. Sp more→ecifications • Shank Diameter: 1/4 • Dia Metric: 6.3 • Dia Imperial: 1/4 • Cut Length Metric: 12.7 • Cut Length Imperial: 1/2 • Overall Length Metric: 56
 |
Tungsten Carbide Tipped. Two flute cutter with a positive shear angle (down-cut) for fast cutting and fine finish. Ideal for grooving & trimming veneer finishes & laminated boards. Down cut feature more→stops break out on top edge. Has a 4 degree shear. Specifications • Shank Diameter: 1/2 • Dia Metric: 9.5 • Dia Imperial: 3/8 • Cut Length Metric: 25 • Overall Length Metric: 70
 |
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Specifications • Shank Diameter: 8 mm • Dia Metric: more→8 • Dia Imperial: 5/16 • Cut Length Metric: 25 • Overall Length Metric: 70
 |
Eccentric single flute cutters. Cutters are chosen for fast free cutting, when cutting speed takes preference over finish. Small diameter tools must be handled with care to avoid breakage. Singl more→e flute cutters should not be used in eccentric chucks. Specifications • Shank Diameter: 1/4 • Dia Metric: 6.3 • Dia Imperial: 1/4 • Cut Length Metric: 25 • Overall Length Metric: 57
Important!
Compatibility with specific models Routers & Trimmers should be confirmed with the online store manager directly before purchase.
Compatibility with specific models Routers & Trimmers should be confirmed with the online store manager directly before purchase.
