Festool MFK 700 EQ-Set 574364
Diamond Core Bits & Milling Cutters1358
 |
Cutter is turned, milled and ground from a solid piece of Tungsten Carbide and provide the greatest durability when used under stress load conditions. Offers better plunge cutting characteristics tha more→n TCT. Many more re-sharpenings can be obtained from STC tools. A harder grade of carbide is used as the tool is not brazed. Single flute - faster feed rates. Single flute cutters should not be used in eccentric chucks. Specifications • Shank Diameter: 1/4 • Dia Metric: 6.3 • Dia Imperial: 1/4 • Cut Length Metric: 10
 |
For picture hanging flush to the wall. Plunge cutter & move forward, then retract out from entry hole. A template is recommended. For No8 & No10 screw heads. Not suitable for grooving applicati more→ons. Specifications • Shank Diameter: 1/4 • Dia Metric: 9.5 • Dia Imperial: 3/8 • Dia2 Metric: 4.5 • Cut Length Metric: 4.5 • Cut Length Imperial: 11/64 • Overall Length Metric: 53
 |
For trimming and bevelling timber, lippings and plastic laminate edges or any shaping applications. Self-guiding trimmer with bearings mounted on end of cutter. Specifications • Shank Diameter more→: 1/4 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 16 • Overall Length Metric: 59 • Bearing Dia Metric: 12.7
 |
The whole profile edge of the cutter can be used for skirting boards and period style finishes in furniture. Different parts of these cutters can be used to give various profiles. Specifications &bul more→l; Shank Diameter: 1/2 • Dia Metric: 27 • Cut Length Metric: 45 • Overall Length Metric: 94 • Bearing Dia Metric: 12.7 • Bearing Dia Imperial: 1/2 • Radius 1 Metric: 3 • Radius 2 Metric: 9
 |
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Specifications • Shank Diameter: 1/4 • Dia Metric: 8 more→.9 • Cut Length Metric: 25 • Overall Length Metric: 70
 |
Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. Sp more→ecifications • Shank Diameter: 1/2 • Dia Metric: 12 • Dia Imperial: 15/32 • Cut Length Metric: 50 • Cut Length Imperial: 2 • Overall Length Metric: 93
 |
Trend Craft Pro 1/4in shank bearing guided round over router cutter - 1.6mm radius Two Flute Carbide tips. Two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timb more→er and timber based materials. Leaves perfect superfine round over detail for a contemporary eased edge arris profile on straight and curved edges. Two bearings supplied for round over or quirked Ovolo moulding for additional options for fine detailing on boxes and modelmaking work. PTFE coating to minimise heat and resin build up for increased cutter performance and longevity. 1/4in shank for easy control in smaller routers with 'K'mark shank to ensure safe working practices. Specifications …
 |
Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. Sp more→ecifications • Shank Diameter: 8 mm • Dia Metric: 18 • Dia Imperial: 45/64 • Cut Length Metric: 25 • Cut Length Imperial: 63/64 • Overall Length Metric: 65.5
Important!
Compatibility with specific Routers & Trimmers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Routers & Trimmers models should be checked with manager of online store immediately before purchase.
