Festool MFK 700 EQ-Set 576238
Diamond Core Bits & Milling Cutters1241
 |
HSS Three Flute 90° Countersink. Specifications • Nominal Diameter: 6.3mm • Shank Diameter: 5mm • Overall Length: 45mm • Capacity: 1.5mm - 6.3mm Features and Benefits • P more→roduces countersinks for cap screws • Self centering and chatter free • Can be used for chamferring • DIN 335C
 |
The Dormer G136 HSS 90° Countersink is designed to provide precise and efficient cutting for countersunk-hea
 |
HSSCo 3 Flute 90° countersink. Specifications • Nominal Diameter: 25.0mm • Shank Diameter: 10mm • Overall Length: 67mm • Capacity: 3.8mm - 25.0mm Features and Benefits • more→Produces countersinks for cap screws • Self centering and chatter free • Can be used for chamferring • DIN 335C
 |
Cut a wider edge line, at an angle of 80 degrees. A 16mm bearing is supplied as standard. A larger 19mm bearing will spread the wear of the cutting edges. Specifications • Shank Diameter: 1/ more→4 • Dia Metric: 20 • Cut Length Metric: 14 • Overall Length Metric: 57 • Angle: 80
 |
1/2 Straight 12.7 x 50mm TCT Router BitPTDDRPDIR75350"
 |
These two wing Tungsten Carbide Tipped slotting cutters are ideal for grooving and rebating operations. A 12.7mm diameter bearing is supplied with every cutter giving a 9.5mm groove depth. Depth of cu more→t can be changed by purchasing alternative bearing sizes. Easy to set-up and use. Hex key is supplied. N.B. The grooving section of this tool cannot be detached from the shank. Specifications • Shank Diameter: 1/4 • Dia Metric: 31.8 • Dia Imperial: 1 1/4 • Cut Length Metric: 8 • Cut Length Imperial: 5/16 • Overall Length Metric: 67 • Bearing Dia Metric: 12.7 • Rebate Metric: 10
 |
Panel raiser cutters for producing the panel for cabinet panelled doors, tool matches our range of profile scribers. Suitable for use on natural timber and MDF. For use in a router table only. Take more→several passes, increasing the depth with each pass. Must be used in a stationary variable speed router either mounted overhead or inverted in a router table at a reduced speed. For use on natural timber and MDF. Stationary use only. Can be used for curved panels if a copy pin is used. Specifications • Shank Diameter: 8 mm • Dia Metric: 45 • Dia2 Metric: 11 • Cut Length Metric: 17 • Overall Length Metric: 49.5 • Angle: 10
 |
This Trend 1/2in Router Cutter Set has a range of Tungsten Carbide Tipped cutters for decorative woodworking. Suitable for softwood hardwood chipboard plywood and MDF. Supplied in a plastic carry c more→ase. Contains: 2 x Straight Cutters: 6.3 x 16 12.7 x 25mm1 x V-Groove Cutter: 45° x 12.7mm2 x Guided Round Over: R6.35mm R9.5mm1 x Guided Ogee: R4mmPTDTRESET6P
Important!
Compatibility with specific models Routers & Trimmers should be confirmed with the online store manager directly before purchase.
Compatibility with specific models Routers & Trimmers should be confirmed with the online store manager directly before purchase.
