Festool OF 1010 REBQ-Plus 576918
Diamond Core Bits & Milling Cutters1130
 |
Single fluted Tungsten Carbide straight cutter for fast free cutting. Single flutes should be chosen where speed and clearance rates are more important than the finish. Depth of cut should not exc more→eed cutter diameter. Specifications • Shank Diameter: 1/4 • Dia Metric: 6.3 • Dia Imperial: 1/4 • Cut Length Metric: 12.7 • Cut Length Imperial: 1/2 • Overall Length Metric: 56.5
 |
Template thickness should be 5mm thicker than cut length of cutter. Can be used to rout both tenons and housings. Specifications • Shank Diameter: 1/2 • Dia Metric: 19.1 • Dia Imperi more→al: 3/4 • Cut Length Metric: 11.1 • Overall Length Metric: 63.5 • Bearing Dia Metric: 19.1 • Bearing Dia Imperial: 3/4
 |
Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. Sp more→ecifications • Shank Diameter: 8 mm • Dia Metric: 7.9 • Dia Imperial: 5/16 • Cut Length Metric: 25.4 • Cut Length Imperial: 1 • Overall Length Metric: 68.5
 |
Trend CraftPro Cutter with two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials. With a bottom cut feature. The PTFE coating minimi more→ses heat and resin build-up for increased cutter performance and longevity. 1/2in shank for heavier workloads, ideal for router table work and for use in bigger routers. The 'K' mark shank ensures safe working practices. Suitable for a wide range of applications such as engraving, grooving, rebating and shallow morticing. Use on softwoods, hardwoods, MDF, plywood and chipboard.
 |
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Specifications • Shank Diameter: 1/2 • Dia Metric: 6 more→.3 • Dia Imperial: 1/4 • Cut Length Metric: 25 • Overall Length Metric: 70
 |
Self-guiding trimmers with bearings mounted on end of cutter. For trimming plastic or plywood overlay. For copy profiling, use the bearing to follow a template or base edge of board. An approxim more→ate 3mm overlap should be left before copy profiling. When using plastic laminate adhesive to dry before trimming. This avoids clogging the guide bearing. Downcut to prevent breakout on veneer. Specifications • Shank Diameter: 1/4 • Dia Metric: 19.1 • Dia Imperial: 3/4 • Cut Length Metric: 14 • Overall Length Metric: 60 • Bearing Dia Metric: 19.1 • Bearing Dia Imperial: 3/4
 |
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications • Shank Diam more→eter: 1/2 • Dia Metric: 12 • Dia Imperial: 15/32 • Cut Length Metric: 32 • Overall Length Metric: 73
 |
Excellent value for money. This twelve piece cutter set contains a range of the most widely used cutters for decorative woodworking. Supplied in plastic carry case. Specifications • Shank Diamet more→er: 8 mm • Pack Qty: 12 piece Contents: 3 x Straight dia 6.3mm & 12.7mm (x2) 2 x Guided Round Over radius 6.35mm & 9.5mm 1 x Guided chamfer 45 degree 1 x Guided rebater 9.5mm rebate 1 x Guided Trimmer dia 12.7mm 1 x Guided Cove radius 6.3mm 1 x 'V' Groove 45 degree 1 x Core Box radius 6.35 1 x Guided Ogee radius 4mm
Important!
Compatibility with specific Routers & Trimmers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Routers & Trimmers models should be checked with manager of online store immediately before purchase.
