Festool OF 1010 REBQ-Plus 576924
Diamond Core Bits & Milling Cutters1137
 |
Tungsten Carbide Tipped. Two flute cutter with a positive shear angle (down-cut) for fast cutting and fine finish. Ideal for grooving & trimming veneer finishes & laminated boards. Down cut feature more→stops break out on top edge. Has a 3 degree shear. Specifications • Shank Diameter: 1/2 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 50 • Overall Length Metric: 107
 |
Clarkson 02PM/04PM long series multi flute end mills. Made from M42 High Speed Steel with 8% cobalt. Sizes 3.0mm - 20.0mm: Four Flutes Sizes 22.0mm - 38.0mm: Six Flutes Sizes 40.0mm - 50.00mm: Eight F more→lutes BS 122/4. Specifications • Milling Diameter: 16mm • Shank Diameter: 16mm • Length of Cut: 58.5mm • Overall Length: 108.5mm • Square End Helix Angle: 30° Features and Benefits • Premium grade M24 High Speed Steel with 8% cobalt (HSS Co8) • Screwed shank to BS122/4 • Multidirectiona
 |
Ideally suited for cutting radiused edges at speed, as a side fence can be dispensed with. The guide bearing follows the vertical edge or template. Alternative bearing Ref. B127A creates a shallow ra more→dius. Specifications • Shank Diameter: 1/4 • Dia Metric: 25.3 • Cut Length Metric: 14.3 • Cut Length Imperial: 9/16 • Overall Length Metric: 64 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 7.9 • Radius 1 Imperial: 5/16
 |
Trend Craft Pro 1/4in shank straight router cutter - 12.7mm diameter Two Flute Carbide tips Two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber b more→ased materials. With bottom cut feature for general purpose slotting, grooving and 25mm deep cutting depth for medium duty morticing work. 12.7mm diameter X 25mm cutting depth ideal for matched slots and grooves with sheet material for panel work. PTFE coating to minimise heat and resin build up for increased cutter performance and longevity. 1/4in shank for easy control in smaller routers with 'K'mark shank to ensure safe working practices. Specifications • Shank Diameter: 1/4 • …
 |
Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods. For housing, grooving and mortising. Features 2mm micrograin Tungsten Carbide tips, for cutting the more→most abrasive materials to give extra long life. PTFE coated, indicated by distinctive black colouring. Can be used on hardwood & softwood, fibreboard, plywood and particle board. Etched dimensions on extra long 40mm shanks. Specifications • Shank Diameter: 1/4 • Dia Metric: 15 • Cut Length Metric: 25 • Overall Length Metric: 67 • Type or Grade: Centre tip
 |
Cutter for use with the Leigh Dovetail Jig. These cutters have extra long shanks. Specifications • Shank Diameter: 1/2 • Dia Metric: 20.5 • Cut Length Metric: 32 • Overall Leng more→th Metric: 83 • Angle: 98
 |
Some Ovolo cutters can be used with radius cutters, to make rule joints. Specifications • Shank Diameter: 1/4 • Dia Metric: 19 • Cut Length Metric: 11 • Overall Length Metric: 38 more→• Radius 1 Metric: 4
 |
Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. Sp more→ecifications • Shank Diameter: 1/4 • Dia Metric: 9 • Dia Imperial: 23/64 • Cut Length Metric: 19 • Cut Length Imperial: 3/4 • Overall Length Metric: 59.5
Important!
Compatibility with specific Routers & Trimmers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Routers & Trimmers models should be checked with manager of online store immediately before purchase.
