Festool OF 1400 EBQ-Plus 576209
Diamond Core Bits & Milling Cutters1344
 |
Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. Sp more→ecifications • Shank Diameter: 8 mm • Dia Metric: 6 • Dia Imperial: 15/64 • Cut Length Metric: 25 • Cut Length Imperial: 1 • Overall Length Metric: 68.5
 |
A set of 6 popular sizes of Dormer G136 HSS countersinks supplied in a plastic case. Specifications G1366.3 • Diameter: 6.3mm • Length: 45mm • Shank Diameter: 5mm G1368.3 • Diamete more→r: 8.3mm • Length: 50mm • Shank Diameter: 6mm G13610.4 • Diameter: 10.4mm • Length: 50mm • Shank Diameter: 6mm G13612.4 • Diameter: 12.4mm • Length: 56mm • Shank Diameter: 8mm G13616.5 • Diameter: 16.5mm • Length: 60mm • Shank Diameter: 10mm G13620.5 • Diameter: 20.5mm • Length: 63mm • Shank Diameter: 10mm Features and Benefits • Tool Material: HSS • Surface Treatment: Bright • Standard: DIN 335 C • Direction …
 |
Trend Professional HSSE 8mm shank straight router cutter - 5mm diameter for aluminium and plastics 5mm diameter X 12mm cut length for specialist routing of UPVC aluminium and anodised aluminium on CN more→C machines. The ideal cutter for slotting, grooving and milling clean accurate apertures for aluminium components. Single flute helical up cut for shearing cut and fast clearance of waste for the cleanest of cuts. Manufactured from special grade HSSE for increased durability when machining the most abrasive anodised finishes. 8mm shank for increased support under load. With 'K'mark shank to ensure safe working practices. Specifications • Shank Diameter: 8 mm • Dia Metric: 5 • …
 |
Up-cut helical gives long lasting super fine finish. Specifications • Shank Diameter: 1/4 • Dia Metric: 3 • Cut Length Metric: 12 • Cut Length Imperial: 15/32 • Overall Lengt more→h Metric: 58 • Type or Grade: Up-cut
 |
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications • Shank Diam more→eter: 1/4 • Dia Metric: 15 • Dia Imperial: 19/32 • Cut Length Metric: 25 • Overall Length Metric: 65
 |
Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. Sp more→ecifications • Shank Diameter: 1/2 • Dia Metric: 15 • Dia Imperial: 19/32 • Cut Length Metric: 35 • Overall Length Metric: 76.5
 |
High quality 3-flute countersink bit for deburring, chamfering and countersinking. A finely-tuned material elasticity provides for great durability. Perfect chip removal and a low tilt risk ensure ple more→asant working. Cutting section as per DIN 335-C, 90° with 3 cutters. ¼" hexagon, suitable for holders with take-up as per DIN ISO 1173-D 6.3. Features and Benefits • Hex shaft for very good power transfer • Finely-tuned material elasticity for great durability • Very good centring properties • Perfect chip removal • Precise return movement Contents 846 3-flute Countersink Bit, 20.50 x 41 mm
 |
Tungsten Carbide Tipped. Two flute cutter with a positive shear angle (down-cut) for fast cutting and fine finish. Ideal for grooving & trimming veneer finishes & laminated boards. Down cut feature more→stops break out on top edge. Has a 4 degree shear. Specifications • Shank Diameter: 1/2 • Dia Metric: 9.5 • Dia Imperial: 3/8 • Cut Length Metric: 25 • Overall Length Metric: 70
Important!
Compatibility with specific models Routers & Trimmers should be confirmed with the online store manager directly before purchase.
Compatibility with specific models Routers & Trimmers should be confirmed with the online store manager directly before purchase.
