Festool OF 1400 EBQ-Plus 576210
Diamond Core Bits & Milling Cutters1343
 |
Use for bevelling, chamfering and for producing mortar grooves. Approximately 1.0mm flat will be found on the nose. Specifications • Shank Diameter: 1/2 • Dia Metric: 17.5 • Cut Leng more→th Metric: 8 • Overall Length Metric: 52.7 • Angle: 45
 |
The Trend CraftPro Cutter with two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials. With a bottom cut feature. The PTFE coating mi more→nimises heat and resin build-up for increased cutter performance and longevity.The 1/4in shank for easy control in smaller routers with 'K' mark shank to ensure safe working practices. Suitable for a wide range of applications such as engraving grooving rebating and shallow morticing. Use on softwoods hardwoods MDF plywood and chipboard.The Trend C019 x 1/4 TCT Two Flute Cutter has the following specification: Cutting Diameter: 12mm (15/32in)Cuttin
 |
For veining, panelling, 'V' grooving, bevelling & chamfering. Specifications • Shank Diameter: 1/2 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 11 • Cut Length more→Imperial: 7/16 • Overall Length Metric: 55 • Angle: 60
 |
Two flute straight plunging bits General-purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move.
 |
Small panelling cutters, popular for decorative cupboard doors and furniture embellishments. Specifications • Shank Diameter: 1/4 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Leng more→th Metric: 9.5 • Cut Length Imperial: 3/8 • Overall Length Metric: 50 • Radius 1 Metric: 2
 |
Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing fa more→ilure. Scrape off any resin build-up. Always check the tightness of the fixing screw before using cutter. Specifications • Cut Length Imperial: 7/64 • Bearing Dia Metric: 6.3 • Bearing Dia Imperial: 1/4 • Sawbore: 3.2 • Sawbore Imperial: 1/8
 |
Trend Bearing Guided Ovolo & Round Over Cutters are ideal for curved work. They can be used on natural timber man-made particleboard and fibreboard. Popular uses include edging window frames glazing more→bars cabinets tabletops pencil rounds trophies shelves and fire surrounds. They can also be used to produce bullnose edge moulds. Supplied with two bearings 9.5mm and 12.7mm diameter. The larger bearing removes the quirk producing a round over profile.This Trend TCT Bearing Guided Ovolo & Round Over has the following specification: Radius: 3.2mmDiameter: 19mmCutter Height: 9.5mmShank: 1/4inBearings: 9.5 12.7mmPTDTRE461
 |
1/4 and 1/2" shank extra long router bits with TCT heads especially for use with extra thickness laminate used by kitchen fitters. Supplied with hexagon key. in storage case.PTDDRPDIR89993"
Important!
Compatibility with specific models Routers & Trimmers should be confirmed with the online store manager directly before purchase.
Compatibility with specific models Routers & Trimmers should be confirmed with the online store manager directly before purchase.
