Festool OF 2200 EB-Plus 576219
Diamond Core Bits & Milling Cutters1536
 |
Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. Sp more→ecifications • Shank Diameter: 1/2 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 38 • Cut Length Imperial: 1 1/2 • Overall Length Metric: 81
 |
Up-cut helical gives long lasting super fine finish. Specifications • Shank Diameter: 1/4 • Dia Metric: 4 • Dia Imperial: 5/32 • Cut Length Metric: 14 • Cut Length Imperial: more→15/32 • Overall Length Metric: 59 • Type or Grade: Up-cut
 |
Profilers with shank mounted bearings for guidance, for use with router mounted above or below a table when following a template. Bearing guided cutters are suitable for both straight and curved work. more→For profiling and rebating applications only. NOT for plunge, cutting or grooving. A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing.
 |
Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. Sp more→ecifications • Shank Diameter: 8 mm • Dia Metric: 7.9 • Dia Imperial: 5/16 • Cut Length Metric: 19.1 • Cut Length Imperial: 3/4 • Overall Length Metric: 62.5
 |
Panel raiser cutters for producing the panel for cabinet panelled doors, tool matches our range of profile scribers. Suitable for use on natural timber and MDF. For use in a router table only. Take more→several passes, increasing the depth with each pass. Must be used in a stationary variable speed router either mounted overhead or inverted in a router table at a reduced speed. For use on natural timber and MDF. Stationary use only. Can be used for curved panels if a copy pin is used. Specifications • Shank Diameter: 8 mm • Dia Metric: 45 • Dia2 Metric: 11 • Cut Length Metric: 17 • Overall Length Metric: 49.5 • Angle: 10
 |
Heavy-duty countersink manufactured from alloy steel with five flutes and a 90° head. For countersinking screw holes for flush fitting of screwheads in soft metals, hardwood, soft wood and plastics. F more→itted with quick change 1/4" hex. shank. Compatible with drills with a standard 10/13mm chuck. Features & Benefits:• Heavy-duty countersink made from alloy steel with five flutes and a 90° head• For countersinking screw holes for flush fitting of screwheads in soft metals, hardwood, soft wood and plastics• Fitted with quick change 1/4" hex. shank• Compatible with drills with a standard 10/13mm chuckSpecificat
 |
Ideal for following templates when panelling and profiling in furniture manufacture. It is advisable that the template is at least 5mm thicker than the cut length of the cutter. Specifications &bul more→l; Shank Diameter: 1/4 • Dia Metric: 22 • Cut Length Metric: 10 • Overall Length Metric: 51 • Bearing Dia Metric: 22 • Radius 1 Metric: 3.5
 |
The glazing bar ovolo cutter is bearing guided to speed setting-up and to enable curved frames to be moulded. Specifications • Shank Diameter: 1/4 • Dia Metric: 28 • Cut Length Metric: more→19 • Overall Length Metric: 61 • Bearing Dia Metric: 12.7 • Bearing Dia Imperial: 1/2 • Radius 1 Metric: 10
Important!
Compatibility with specific Routers & Trimmers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Routers & Trimmers models should be checked with manager of online store immediately before purchase.
