Festool OFK 500 Q-Plus R2 576227
Diamond Core Bits & Milling Cutters960
 |
HSSCo 3 Flute 90° countersink. Specifications • Nominal Diameter: 12.4mm • Shank Diameter: 8mm • Overall Length: 56mm • Capacity: 2.8mm - 12.4mm Features and Benefits • P more→roduces countersinks for cap screws • Self centering and chatter free • Can be used for chamferring • DIN 335C
 |
Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods. For housing, grooving and mortising. Features 2mm micrograin Tungsten Carbide tips, for cutting the more→most abrasive materials to give extra long life. PTFE coated, indicated by distinctive black colouring. Can be used on hardwood & softwood, fibreboard, plywood and particle board. Etched dimensions on extra long 40mm shanks. Specifications • Shank Diameter: 1/4 • Dia Metric: 20 • Cut Length Metric: 20 • Overall Length Metric: 59 • Type or Grade: Centre tip
 |
These are ideal for engraving and decorative panel work. Made with Solid Tungsten Carbide inserts, with two flutes. Specifications • Shank Diameter: 8 mm • Dia Metric: 6.3 • Dia Impe more→rial: 1/4 • Cut Length Metric: 12.7 • Cut Length Imperial: 1/2 • Overall Length Metric: 64.5 • Radius 1 Metric: 3.2 • Radius 1 Imperial: 1/8
 |
Trend Professional 1/2in shank bearing guided trimming cutter - 12.7mm diameter for laminate and template work 12.7mm diameter X 25mm cutting length bearing guided trimmer for bringing decorative lam more→inates and veneers flush to an edge or for templating work. Two flute TCT tips, Ideal for worktop fitting for flush trimming edging laminates for a professional finish. Bearing guide can be used with templates, ideal for pattern making or replicating components. 1/2in shank for heavier work, ideal for router table work with the template below the workpiece. K mark shank to ensure safe working practices. Specifications • Shank Diameter: 1/2 • Dia Metric: 12.7 • Dia Imperial: 1/2 …
 |
For trimming and bevelling timber, lippings and plastic laminate edges. Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life. PTFE coated, more→indicated by distinctive black colouring. Can be used on hardwood & softwood, fibreboard, plywood and particle board. Etched dimensions on extra long 40mm shanks. Specifications • Shank Diameter: 1/4 • Dia Metric: 6.35 • Dia Imperial: 1/4 • Cut Length Metric: 12.7 • Cut Length Imperial: 1/2 • Overall Length Metric: 63
 |
Template thickness should be at least 5mm thicker than cutter cut length of cutter. Approximately 1.0mm flat will be found on the nose. Specifications • Shank Diameter: 1/4 • Dia Metric: more→12.7 • Dia Imperial: 1/2 • Cut Length Metric: 16 • Overall Length Metric: 66.61 • Bearing Dia Metric: 12.7 • Bearing Dia Imperial: 1/2 • Angle: 60
 |
Lip and spur dowel drills for use with the Trend Craft Dovetail Jig dowelling template. Can be used for 8mm dowels. For drilling machines or routers. Specifications • Shank Diameter: 1/4 &bul more→l; Dia Metric: 8 • Cut Length Metric: 35 • Overall Length Metric: 70
 |
Bevel Edge Trimming Bits With ball bearing or pin guide. To trim laminate producing a bevelled edge. Suitable for straight or shaped work. 1/4 Shank Diameter (Pin Guided)
Important!
Compatibility with specific Routers & Trimmers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Routers & Trimmers models should be checked with manager of online store immediately before purchase.
