Flex LE 9-11 125 (436.291)
Cutting Discs208
 |
The Faithfull Turbo Cut Diamond Blade has been designed to offer excellent performance levels and a faster cut than standard sintered segmented blades. Perfect for a wide range of materials, this blad more→e excels in very hard materials such as hard concrete, class A engineering bricks, 65-100 Newton clay paviours, hard flint aggregates, reinforced concrete lintels, kerbs, hard concrete paving slabs, some clay products, granite and hard slate.Blade Diameter: 125mmBore Size: 22.2mmSegment Height: 10mm.Additional Information:&bu
|
Value plus blade suitable for cutting hard and medium materials including concrete, brick and stone. Features & Benefits: • Value plus blade suitable for cutting hard and medium materials including c more→oncrete, brick and stone. • Model No. WDVP125 Specifications: Model No WDVP125 Bore: Ø22mm Brand: Worksafe Disc Size: Ø125mm(Ø5") Nett Weight: 0.15kg
|
The X Lock system makes it easier to swap out angle grinder accessories than ever before. Simply pull the X Lock lever on the machine to release any attached accesory, and press the new accessory into more→place until it locks with an audible click. There is no need for additional tools or detachable components and X Lock accessories are mounted safely and securely in a matter of seconds. These Makita X Lock diamond cutting discs are suitable for cutting concrete, granite and marble. Features & Benefits • X Lock mechanism allows accessories to be attached without a nut, flange or spanner • No need to worry about missing parts or tools • X Lock accessories can be swapped over in seconds …
|
Faithfull Abrasive Jumbo Flap Discs contain up to 40% more abrasive than standard flap discs, providing a considerably longer working life. Manufactured from long lasting Zirconia Alumina. Resin bonde more→d for extra strength and durability. Designed for use with most angle grinders of the corresponding size. Ideal for use on wood, metal, plastic and stainless steel.Diam Size 127mmGrade Fine (80 Grit)Bore. 22.23mmAddition
|
Up to 3x more precise than a standard ceramic diamond disc - The tiles used in modern construction are often large, very hard and expensive. Cutting them to a high standard every time is therefore cru more→cial yet difficult. The EXPERT HardCeramic Tile-Cutting Disc uses Diamond Technology and a range of design features to deliver the best results consistently, even in the hardest ceramics. Bosch Diamond Technology, which brings new diamonds to the surface to ensure the rim is always sharp, allows our ceramic cutting disc to cut smoothly through even hard tiles. The thin, strong body and continuous fluted rim offer maximum control and keep vibration low for a high quality, chip-free cut. The Bosch …
|
Impressive Removal Rate - The X551 Expert for Metal has an impressive material removal rate on metal surfaces. The zirconia alumina and semi-friable aluminium oxide abrasive grit blend delivers a bril more→liant removal rate and lifetime on metal applications. Furthermore, its highly robust X-cloth with stable backing ensures durability and steady performances on tough surfaces. The grit is bonded using fully synthetic resin on X-cloth for optimal sanding behaviour. It is intended for deburring and welding preparation on carbon steel, mild steel, aluminium, non-ferrous metals and cast iron. It is also ideal for removing discolouration, stock and surface imperfections. The X551 Expert for Metal is …
|
Excellent Lifetime - The X571 Best for Metal has an excellent lifetime when grinding welding seams and coarse sanding metal surfaces. Its high-quality zirconia alumina/semi-fr
|
Designed for cutting concrete and stone with angle grinders, these Stanley cutting discs have a depressed centre so the cutting edge is offset from the nut - this allows for better access in tight spa more→ces. Features and Benefits • Compatible with standard angle grinders • Depressed centre: prevents the nut from causing an obstruction and allows access in tight spaces Specifications • Disc Diameter: 125mm • Bore: 22mm • Thickness: 3mm • Pack Quantity: 1
Wire & Cup Brushes295
|
Price from £5.64 up to £7.49
Compare prices6→Compare prices and buy Makita 3 Piece Wire Brush Set D-66070
Designed for use with power tools, this set contains three types of wire brush - cup, wheel and end. All brushes have a 6mm (1/4") straight shank and can be used at a maximum RPM of 4,500. Specificati more→ons • Shank: 1/4" Straight • Pack Quantity: 3 • Max RPM: 4500 rpm Features and Benefits • Cup type: light duty for removing coatings, rust, and cleaning • Wheel type: light duty for removing coatings, rust, and cleaning • End type: light duty for working on hard to reach areas (pipes and profiles)
|
Price from £3.00 up to £3.49
Compare prices6→Compare prices and buy Sealey Flat Top Brassed Decarbonising Brush 13mm 6mm Shank VS1802
Flat trimmed brush with brassed and crimped filaments for extra rigidity. Ø6 x 20mm Shaft. Features & Benefits: • Flat trimmed brush with brassed and crimped filaments for extra rigidity. • Ø6 x 20mm more→Shaft. • Trim Length/Ø: 20/13mm. • Model No. VS1802 Specifications: Model No VS1802 Brand: Sealey Nett Weight: 0.02kg Trim Diameter: 13mm Trim Length: 20mm
|
Price from £14.70 up to £17.95
Compare prices6→Compare prices and buy Draper Expert Brassed Steel Wire Cup Brush 60mm M10 x 1.5 Thread
Expert Quality, industrial quality manufactured from 0.3mm hardened brassed steel wire. Designed for use with angle grinders. Features and Benefits • Expert Quality • For angle grinders &bu more→ll; 0.3mm hardened brassed steel wire Contents 1 x Crimped Wire Cup Brush, 60mm, M10
|
Price from £4.39 up to £5.49
Compare prices5→Compare prices and buy Lessmann Precision End Wire Brush 60mm 12mm 6mm Shank LES451161
The Lessmann End Brushes are fitted with a 6mm shank for cleaning and de-burring in hard to reach areas. They are ideal for the removal of paint and the cleaning of moulds and castings. Also for worki more→ng on edges and recesses and the inside of bores etc.The Lessmann End Brush With Shank has the following specification: Wire Type: Steel.Diameter: 12mmWire Height: 20mmOverall Length: 60mmWire Gauge: 0.30.Max Speed: 20,000/rpm.Addi
|
Price from £20.89 up to £23.95
Compare prices5→Compare prices and buy Lessmann X Lock Non Sparking Crimped Wire Cup Brush 85mm X-Lock 423.16X
These Lessmann X-Lock non-sparking brushes are suitable for use on hand-held angle grinders with the X-Lock fitting, they can be used for polishing, light deburring work, and removing rust, paint, dir more→t, and scale. The brush with steel wire is used for flexible work on large steel surfaces. The high-grade 'Made in Germany' quality is often used in the metalworking industry and in craft businesses, car workshops, and by staircase, railing and container builders. Features of the wire brushes are their dense filling and precise concentricity.1 x Lessmann X-Lock Crimped Cup Steel Brush 85mm Non Spark
|
Price from £4.49
Compare prices5→Compare prices and buy Bosch 0.2mm Crimped Steel Wire Brush 50mm 6mm Shank 2608622022
Fine Finish on Steel - The Wire Cup Brush delivers an excellent, fine-surface finish. It features crimped wire for light-to-medium
|
Price from £2.28 up to £2.99
Compare prices6→Compare prices and buy Faithfull 0402506130 Wire End Brush 25Mm Flat End FAIWBS25E
This Faithfull Wire End Brush is suitable for cleaning paint or deburring moulds or castings in hard-to-reach areas such as cylinders. The brush has crimped steel wire and is designed for light to med more→ium-duty applications. Suitable for use in industrial power tools at higher speeds. The FAIWBS25E Wire End Brush has the following specifications: Type: Flat End. Face Diameter: 25 mm. Shaft: 6 mm (1/4 inch). Wire: 0.3 mm crimped steel. Conforms to ISO 9001. and DIN EN1083-1 and 2.PTDFAIWBS25E
|
Price from £5.95
Compare prices5→Compare prices and buy Bosch 0.3mm Crimped Steel Wire Brush 70mm 6mm Shank 1609200270
Fine Finish on Steel - The Wire Cup Brush delivers an excellent, fine-surface finish. It features crimped wire for light-to-medium
Important!
Compatibility with specific models Grinders & Polishers should be confirmed with the online store manager directly before purchase.
Compatibility with specific models Grinders & Polishers should be confirmed with the online store manager directly before purchase.
