Flex XS 713 (334 111)
Cutting Discs200
 |
Lasts up to 4x longer than a standard multi material diamond disc - On modern construction sites you need to cut a wide variety of hard materials, and these take their toll on tools. The EXPERT MultiM more→aterial Disc is the ideal accessory for busy construction professionals needing to cut concrete, brick, roofing tiles and reinforced concrete - because it simply keeps doing the job for longer. The high segments on this cutting disc are made from an advanced matrix of metal and diamonds, which is designed to stay razor sharp. These segments are laser-welded onto a hard steel body; and the sides are fluted to remove dust for efficiency and longevity. This mix of optimum diamond grits and advanced …
 |
Up to 3x more precise than a standard ceramic diamond disc - The tiles used in modern construction are often large, very hard and expensive. Cutting them to a high standard every time is therefore cru more→cial yet difficult. The EXPERT HardCeramic Tile-Cutting Disc uses Diamond Technology and a range of design features to deliver the best results consistently, even in the hardest ceramics. Bosch Diamond Technology, which brings new diamonds to the surface to ensure the rim is always sharp, allows our ceramic cutting disc to cut smoothly through even hard tiles. The thin, strong body and continuous fluted rim offer maximum control and keep vibration low for a high quality, chip-free cut. The Bosch …
 |
Suitable for use with angle grinders, these flap discs have strips of abrasive material and can be used for grinding, shaping or rough sanding on a range of materials. Features and Benefits • Des more→igned for standard 125mm angle grinders • Suitable for a range of materials, including wood, metal, masonry and PVC • Long life Specifications • Stanley Part No: STA32126 • Disc Diameter: 125mm • Grit: 60 Grit
 |
Excellent Lifetime - The X-LOCK X571 Best for Metal Flap Disc offers an excellent lifetime on metal applications. Its high-quality zirconia alumina/semi-fr
 |
• General-purpose flat cutting discs recommended for use with Sealey and other leading makes of grinding and cutting power tools.General-p
 |
Designed for cutting metal with angle grinders, these Stanley cutting discs have a depressed centre so the cutting edge is offset from the nut - this allows for better access in tight spaces. Features more→and Benefits • Compatible with standard angle grinders • Depressed centre: prevents the nut from causing an obstruction and allows access in tight spaces Specifications • Disc Diameter: 125mm • Bore: 22mm • Thickness: 3mm • Pack Quantity: 5
 |
The Makita Ultra Thin Metal Cutting Disc is a high quality stainless steel cutting disk with an extra thin kerf. Desiged for cutting stainless steel the disk will give a perfect cutting finish everyti more→me. Specifications • Blade Diameter: 125mm • Bore Size: 22.23mm • Thickness: 1.2mm Features and Benefits • Designed for cutting stainless steel / inox / aluminium - extrusions, welds, sections, trunking, pipes
 |
Fast cutting discs ideal for improved runtime when used with cordless angle grinders. Specifications • Diameter: 125mm • Pack Quantity: 1
Abrasive Wheels & Belts3796
 |
Contains 180 Grit and 280 Grit abrasive buffs. For precise and delicate material removal on metal, glass, wood and plastic. The flexible material enables to work on tight and irregularly shaped areas. more→These buffs can be used with mandrels 402 as well as SC402. Specifications • Shank diameter: 3.2mm • Working diameter: 25.0mm • Grit: 180 / 280 • Maximum RPM: 20.000 1/min Contents • 180 Grit Abrasive Buff • 280 Grit Abrasive Buff
 |
Up to 4x better dust extraction than standard sandpaper - Dust. It’s on you, you can taste it in your mouth. It clogs your sandpaper, rendering it ineffective. It coats everything in the room and perm more→eates the house. Dust is the big drawback of sanding, but the Particle Control system has largely eliminated it. Bosch Particle Control ensures all the dust particles are sucked into your vacuum or filter. The Bosch EXPERT M480 Sanding Net is the front line of this system: Particles move straight through its open net instead of clogging the surface or polluting the air. This also makes it highly efficient and extremely long-lasting. Many professionals struggle to believe that we have eliminated sa…
 |
Lasts up to 100x longer than standard sandpaper - Small but tough sanding jobs to remove old material and prepare surfaces for working can be almost impossible with conventional sanders or by hand. Ev more→en if you can reach the surface, these jobs destroy sandpaper. With the EXPERT Sanding Plate however, you can reach corners and sand difficult materials with your oscillating multitool. Using Bosch Carbide Technology, grits of the hardest metal are robustly fixed to the surface. This sharp grit remains fully effective over its long lifespan because you can clean it with a solvent. The EXPERT Sanding Plate is designed for multiple materials and users. The coarse, open grains of the RT2 (grit size …
 |
Excellent Lifetime - The X571 Best for Metal has an excellent lifetime when grinding welding seams and coarse sanding metal surfaces. Its high-quality zirconia alumina/semi-fr
 |
Up to 2x faster than standard sandpaper - Sanding large surfaces is a time-consuming job: Frustratingly, many sandpapers rapidly clog with dust and lose their abrasiveness, making a long process even more→longer. By combining sharp grains and anti-clogging technology, the EXPERT C470 Sandpaper maintains its exceptional capabilities throughout. This means you can work faster, for longer, without compromising on the finish. To achieve the very best sanding surface, our aggressive grain alignment production method aligns the grits to offer their sharpest side. Then we cover them with strong bonding and an anti-clog coating. Along with an optimum grain density, this ensures maximum speed and minimal …
 |
Up to 3x faster than a benchmark Bosch disc - Professional metalworkers take pride in the beauty of a finished surface, but surface finishing can be a time consuming job. By minimising the process ste more→ps required to achieve a perfect finish, the EXPERT SCM Flap Disc ensures efficiency without compromising on quality. Part of the Bosch Surface Structure range of advanced abrasives, the Bosch EXPERT Surface Conditioning Material Flap Disc combines the toughness of aluminium oxide grits with a 3D non-woven structure to give a fast cutting SCM which does not smear. These discs are ideal for refining #36 fiber disc scratches on mild steel. Offering time savings to the professional by saving process …
Important!
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
