HOLZMANN EZS 150PRO
Cutting Discs98
 |
Lasts up to 50x longer than a Bi-Metal blade in tough material - The sheer abrasiveness of cement fibre board means it is one of the toughest materials for your recip saw blade. For installers, plumbe more→rs, electricians and any tradesmen involved in maintenance and restoration, however, cutting these boards is essential. The EXPERT ‘Fiber Plaster’ is designed to cut fibre plaster boards effectively over a long lifetime. Its extreme durability comes courtesy of Bosch Carbide Technology, integrating the hardest metal into an advanced tooth design. The relatively short, pointed blade gives good control and access to tight spaces: it is designed with productivity in mind. The Bosch EXPERT ‘Fiber Plaste…
 |
Milwaukee Heavy Duty TORCH Demolition Reciprocating Saw Blade. Strong and Robust 1.06 mm thick body. Shatter resistant bi-metal blade body will bend and flex but not break. Thick 1.06 mm robust torch more→blade body for precise cuts in sheet metal and pipes. 25 mm blade height for improved stability and minimum vibration. Specifications • Blade Length: 150mm • Teeth per Inch: 14 • Max. Cutting Capacity (Inox): 3-7mm • Max. Cutting Capacity (Metal Pipe): 10-100mm • Max. Cutting Capacity (Non Ferrous Metals): 3-10mm • Max. Cutting Capacity (Steel): 3-10mm • Pack Quantity: 5 Features and Benefits • Robust 1.06 mm thick body • Shatter resistant bi-metal blade …
 |
Milwaukee Heavy Duty AX Carbide Demolition Reciprocating Saw Blades. Up to 50x longer life than standard Bi-Metal blades. Carbide teeth deliver long life and extreme durability in the toughest applica more→tions. Cuts through harderned screws and fastners. Up to 2x faster than standard Bi-Metal blades. A fast and aggressive 5 Tpi tooth pattern allows for the fastest cutting in nail embedded wood and a wide range of construction materials. Up to 25% more cuts per charge vs. standard Bi-Metal blades. Optimised for use with cordless reciprocating saws. Fang tip for faster plunge cutting and reaching into restricted areas. Nail guard protects the tooth during nail impacts for increased durability and …
 |
Reliable Cuts in Tiles - The Standard for Ceramic Diamond Cutting Disc provides reliable cuts in tiles. Its continuous cutting rim achieves accurate results in all sorts of tiles. Additionally, the di more→sc's high-quality standards are ensured by the Bosch diamond competence centre in Switzerland. Use this disc for cutting ceramics, porcelain and fine stoneware. With 22.23 mm bore for standard locking nut angle grinders. Features and Benefits • Reliable Cuts in Tiles • Standard for Ceramic Diamond Cutting Disc provides reliable cuts in tiles • Continuous cutting rim achieves accurate results in all types of tiles Specifications Diameter: 150mm Bore diameter: 22.23mm Bore size: 22.…
 |
Reliable Cuts - The Standard for Universal Turbo Diamond Cutting Disc delivers reliable cuts in universal building materials. Its diamond matrix is engineered for cutting various construction componen more→ts, resulting in well-formed cutting edges. These high-qualitity standards are ensured by the Bosch diamond competence centre in Switzerland. Use this disc when cutting building materials such as concrete and masonry. It is compatible with angle grinders. With 22.23 mm bore for standard locking nut angle grinders. Features and Benefits • Reliable Cuts in Universal Building Materials • Standard for Universal Turbo Diamond Cutting Disc delivers reliable cuts in universal building materials …
 |
Milwaukee Heavy Duty Demolition Reciprocating Saw Blades. Improved tooth geometry for best speed and double the lifetime. Bi-metal quality cutting teeth with 8% cobalt giving the ultimate in performan more→ce and lifetime. TOUGH NECK: Stamped indentations around the reception strengthens the blade at its weakest point. Slim 0.90 mm thick blade body optimised for maximum speed and flexibility. Specifications • Blade Length: 150mm • Teeth per Inch: 24 • Max. Cutting Capacity (Steel Plate): 0.5-3mm • Max. Cutting Capacity (Inox): 0.5-3mm • Max. Cutting Capacity (Metal Pipe): 8-100mm • Max. Cutting Capacity (Non Ferrous Metals): 0.5-3mm • Max. Cutting Capacity (Steel): …
 |
These Faithfull Wood Cutting Sabre Saw Blades are made from HCS carbon steel blades making them specially adapted for wood working in terms of hardness and resistance. They are also highly suitable fo more→r other, relatively soft materials. Manufactured for precision and stability when cutting. Their design and tooth geometry vary with regard to the speed and cutting application which they are intended to perform. Selecting the correct sabresaw blade for the task at hand is essential if the material is to be cut successfully and the desired result achieved. Will fit Sabresaws from the following brands: AEG, Black & Decker, Bosch, DeWalt, Elu, Fein, Hitachi, Makita, Metabo, Milwaukee, Ryobi and most …
 |
Nail embedded wood, non-ferrous, insulation. Plunge cutting especially in window frames.Features
Abrasive Wheels & Belts4027
 |
Impressive Lifetime and Safety - The Expert for Metal Grinding Disc delivers an impressively long lifetime on metal with maximum safety. Its premium aluminium oxide abrasive grain, selected functional more→fillers and additives in a modern phenol resin bond matrix are particularly suited for metal applications. Furthermore, its precision-manuf
 |
Hook System for SCM Discs - The X-LOCK SCM Backing Pad is ideal for use with surface conditioning (SCM) fleece discs thanks to its special hook system. Featuring a centering pin, the pad is the perfec more→t solution for all SCM fleece discs with centre hole. It is suitable for use with X-LOCK angle grinders. Changing backing pads is fast and convenient thanks to the keyless X-LOCK system. Click it on with X-LOCK – the fastest accessory-chang
 |
Fine Finish on Stainless Steel - The Wire Cup Brush provides a good fine surface finish. It is fitted with crimped wire for light-to-medium
 |
Use on metals, castings,welded joints, rivets and rust. Ideal for sharpening, deburring and general purpose grinding of most materials.Speci
 |
4.15Buy!
£
£
Idealo.co.uk
Delivery: in United Kingdom
Report
Flap Grinding Disc / For Angle Grinder / Metal / Grit 60 / Sanding Form Round / Disc Diameter 115 mm
 |
Festool's Granat Net abrasive is the perfect solution for machining materials which produce a large quantity of dust. The open net structure enables dust extraction across the entire surface – for wor more→king cleanly, a high material removal capacity and a long service life of the abrasive. Granat Net is available in five different formats which cover a wide range of different applications. Convenient and safe: Resistant mesh structure with high tear resistance and edge stability – for perfect results right down to the smallest detail, without scratches and without rework. Achieve ideal results more quickly: The perfect solution for machining materials which produce a large quantity of dust. The…
 |
The DeWalt DT3795 Extreme grinding disc has a single row of diamond segments for rapid material removal with a rougher finish. Ideal for dry grinding masonry materials, removal of flashing and smoothi more→ng uneven surfaces. Specifications • Diameter: 125mm (5")
Important!
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
