Makita RP2300FCX (158650)
Diamond Core Bits & Milling Cutters1367
 |
Panel mould and edge mould cutter. Specifications • Shank Diameter: 1/4 • Dia Metric: 25 • Cut Length Metric: 8 • Overall Length Metric: 36.6 • Radius 1 Metric: 12
 |
Panel raiser cutters for producing the panel for cabinet panelled doors, tool matches our range of profile scribers. Suitable for use on natural timber and MDF. For use in a router table only. Take more→several passes, increasing the depth with each pass. Must be used in a stationary variable speed router either mounted overhead or inverted in a router table at a reduced speed. For use on natural timber and MDF. Stationary use only. Can be used for curved panels if a copy pin is used. Specifications • Shank Diameter: 1/2 • Dia Metric: 50 • Dia2 Metric: 16 • Cut Length Metric: 17 • Overall Length Metric: 55.5 • Angle: 10
 |
Trend Craft Pro 1/4in shank bearing guided flush trimming cutter - 12.7mm diameter Two Flute Carbide tips. Two flute carbide TCT tips for clean, professional finish on timber lippings, plastic lamina more→tes and veneers. 12.7mm diameter X 25.4mm cutting depth shank mounted bearing guided trimmer. Ideal for flush trim laminate and veneer work. 1/4in shank for smaller routers and easy control for hand held trimming use on curved and straight edge work or to follow patterns and templates for replicating components. PTFE coating to minimise heat and resin build up for increased cutter performance and longevity. 1/4in shank for easy control in smaller routers with 'K'mark shank to ensure safe working …
 |
SNAP/CS Trend Snappy Countersink with heat treated tool steel countersink with a HSS drill. Adjustable for different length screws and can produce counterbored hole for woodplugs. The drill produce pi more→lot holes only. Comes with 1x 2.0mm (5/64in) Drill & C/S Size No.4, 1x 2.4mm (3/32in) Drill & C/S Size No.6, 1x 2.8mm (7/64in) Drill & C/S Size. No.8, 1x 3.2mm (1/8in) Drill & C/S Size. No.10 and 1x 3.6mm (9/64in) Drill & C/S Size. No.12.
 |
A keyhole recess for picture hanging flush to the wall. Ref. 35/0 - No.8 & No.10 screw heads. Not suitable for grooving applications. Specifications • Shank Diameter: 1/4 • Dia Metric: 9 more→.5 • Dia2 Metric: 4.5 • Cut Length Metric: 4.5 • Overall Length Metric: 40
 |
Ideal for shelves. Edge moulding applications only. Specifications • Shank Diameter: 1/2 • Dia Metric: 22 • Cut Length Metric: 25 • Overall Length Metric: 74 • Bearing Dia Me more→tric: 16 • Radius 1 Metric: 3
 |
Some Ovolo cutters can be used with radius cutters, to make rule joints. Specifications • Shank Diameter: 1/2 • Dia Metric: 28 • Cut Length Metric: 15 • Overall Length Metric: 68 more→• Radius 1 Metric: 8
 |
For door and window construction, decorative panelling and many other joinery applications. Designed for 44mm timber thicknesses. Specifications • Shank Diameter: 1/4 • Dia Metric: 31 &bu more→ll; Cut Length Metric: 13 • Overall Length Metric: 56 • Bearing Dia Metric: 12.7 • Type or Grade: Scribe • Radius 1 Metric: 17
Important!
Compatibility with specific Routers & Trimmers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Routers & Trimmers models should be checked with manager of online store immediately before purchase.
