Metabo KH 18 LTX 24 601712650

Lasts up to 3x longer than a standard drill bit - Drilling through reinforced concrete is a tough job, and it has traditionally taken its toll on drill bits. Regular two-cutter bits get stuck in rebar more→and they eventually break. The Full Carbide Head on the EXPERT SDS plus-7X is an advanced 4-cutter design made from a single piece of the toughest metal: It doesn’t jam and presents no weakness on impact. Thanks to Bosch Carbide Technology and the Full Carbide Head, the EXPERT SDS plus-7X lasts far longer than regular hammer drill bits. It punches through rebar effectively so there is no need to stop, re-target or change bits when you strike steel. For construction professionals drilling concrete an…

Rotabroach TCT Rail cutters are specifically manufactured for cutting rail track. Supplied all over the world, these cutters are specified to drill the world’s toughest rail. They have a special body more→design to give maximum stability and support, along with a super micro-grain carbide tip. Rotabroach is the original name in annular cutter technology with over 40 years of experience. Specifications • Diameter: 34mm • Length: 25mm

This is the Makita cold chisel 17mm hex shank. These are perfect for working on concrete, demolition, render or chasing. Symmetrical head-geometry with centring-tip for optimised results in the event more→of reinforcement. Features & Benefits • Good cutting performance • Cost effective • Symmetrical head-geometry with centring-tip for optimised results in the event of reinforcement • Application: Concrete, demolition, render, chasing • Forged and tempered cold chisel Specifications • Shank: 17mm A/F • Pack Quantity: 1 • Diameter: 17 mm • Overall Length: 450 mm

Bahco 9629 Series Flat Bit have a positive cutting angle which drills holes twice as fast and lasts 3x longer than a conventional bit. Made from high-carbon steel and heat-treated all over. The harden more→ed blade is forged directly from the round shaft. Its winged shoulders enable the bit to first cut the wood and then remove the material from the centre section, ensuring a smooth finish and superior swarf clearance. Sizes 10mm and above feature cutting spurs.This Bahco 9629 Series Flat Bit 15 Piece Set, has a positive cutting angle which drills holes twice as fast and lasts 3 times longer than a conventional bit. Made from high-carbon steel and heat-treated all over, while the hardened blade is …

This standard-length drill features a 1/2" reduced straight shank and a 18.5mm diameter, with an overall length of 157mm and a flute length of 84mm, following DORMER standards. It has a 118° point more→angle and is made from high-speed steel (HSS) with a steam-tempered finish, designed for efficient 4xD drilling in steel without the need for pecking. Features and Benefits • Steam tempered • HSS • Standard spiral flute design • Right hand rotation/cutting • 118° drill point • Reduced cylindrical shank Specifications • Diameter: 18.5mm • Flute Length: 84mm • Overall Length: 157mm

The Osborn HSS Co8 M42 Long Series Cobalt Drill Bit is great for drilling deep holes in stainless steels and difficult to cut materials such as titanium and inconel. Specifications • Diameter: 9. more→5mm • Working Length: 115mm • Total Length: 175mm

Pointed chisel RTec Speed, self-sharpening with 30% higher material removal rate.Specifications: - Length: 400 Mm

45 CRMOV7 air harder steel
Best Steel quality
High impact resistance – virtually indestructible
Evenly hardened
People who work polished and clear lacquered

Cutting Narrow Channels - The SDS max Hollow Gouging Chisel is ideal for easily cutting narrow channels in concrete, and can also be used in brick. It is compatible with SDS max shank systems. Fits al more→l SDS max rotary hammer drills. Features and Benefits • Easy Cutting of Narrow Channels in Concrete • SDS max Hollow Gouging Chisel is ideal for easily cutting narrow channels in concrete • Hollow gouging capabilities allow chiselling through brick Specifications Total length: 300mm Chisel cutting edge: 26mm Shank, shape: SDS max

Various Demolition Applications - The Flat Chisel provides standard chiselling for various demolition applications in concrete and brick. Good material removal on light application is made possible by more→the chisel´s flat cutting edge. The chisel is intended for mortising, demolition and adjustment work as well as for restoring joints and clearing reinforcements. It is compatible with a 30 mm hex shank system for hammers. Flat Chisel provides standard chiselling for various demolition applications in concrete and brick With 30 mm hex shank for breakers. Features and Benefits • Standard Chiselling in Concrete and Brick for Various Demolition Applications Specifications Total length: 400mm C…

Bahco 434 Series Bevel Edge Chisel has been developed according to the scientific ERGO™ process. The 2-component grip, splitproof handle allows repeated hammer blows, and the blades are manufact more→ured from hardened and tempered steel, which are precision ground for maximum sharpness and long-lasting performance. With the exception of the 50mm wide blade, the remaining chisels in the 434 range are supplied with a safety guard and have rounded shoulders for added safety.Size: 35mm.Additional Information:• Chisel Type: Bevel Edge• Size (mm): 35

Bahco 434 Series Bevel Edge Chisel has been developed according to the scientific ERGO™ process. The 2-component grip, splitproof handle allows repeated hammer blows, and the blades are manufact more→ured from hardened and tempered steel, which are precision ground for maximum sharpness and long-lasting performance. With the exception of the 50mm wide blade, the remaining chisels in the 434 range are supplied with a safety guard and have rounded shoulders for added safety.Size: 25mm.Additional Information:• Chisel Type: Bevel Edge• Size (mm): 25

Charger / For Battery Technology Li-Ion / Number of Batteries 2

Features:Single cell monitoring.Minimum temperature development.Processor-controlled charge and discharge management.No memory effect.´´AIR COOLED´´ charging technology.Almost no self-discharge.Capaci more→ty indicator for permanent control of the filling status.Suitable for:Metabo.BS 18 L, BS 18 L BL Q, BS 18 Li, BS 18 LT, BS 18 LT BL, BS 18 LTX, HO 18 LTX 20-82, KHA 18 LTX, MT 18 LTX, RW 18 LTX 120, R12-18, SB 18 LT, SSD 18 LTX 200 BL, SSE 18 LTX, SSW 18 LTX 300, SSW 18 LTX 400, SSW 18 LTX 600, STA 18 LTX 100, STA 18 LTX 140, STAB 18 LTX 100, W 18 LTX 125.