Milwaukee M18 2680-22
Cutting Discs398
 |
• Aluminium oxide flap discs for descaling, derusting, weld preparation, weld cleaning and general surface preparation.• Abrasive flaps are attached to rigid disc with epoxy adhesive - does not requir more→e backing pad.• Depressed centre discs suitable for electric and air tools.Technical SpecificationBo
 |
These premium-quality resin-bonded aluminium oxide flap discs provide durability and fast results. The strong X-weight polyester-cotto
 |
For General Construction Materials - The Eco for Universal Segmented Diamond Disc is the preferred choice for reliable cuts in general construction materials. Its sintered cutting segments deliver goo more→d performance in a variety of materials including concrete, brick, limestone and roofing tile. The diamond disc is suitable for use with angle grinders. With 22.23 mm bore for standard locking nut angle grinders. Features and Benefits • For Reliable Cuts in General Construction Materials • Eco for Universal Segmented Diamond Disc is the preferred choice for reliable cuts in general construction materials • Sintered cutting segments for good performance in a variety of materials …
 |
The Faithfull Zirconia Abrasive Jumbo Flap Discs are designed for use on angle grinders. Jumbo discs contain up to 40% more abrasive than standard flap discs. Manufactured from long lasting Zirconia A more→lumina and resin bonded for extra strength. Suitable for use on wood, metal, plastic and stainless steel. The slightly conical shape is ideal for grinding at 15–25 degree angles on contoured surfaces.1 x Faithfull Zirconia Abrasive Jumbo Flap Disc A40 115mm. 40 grit is suitable for rough grinding. The slightly conical shape is ideal for grinding at 15–25-deg
 |
Up to 3x more precise than a standard ceramic diamond disc - The tiles used in modern construction are often large, very hard and expensive. Cutting them to a high standard every time is therefore cru more→cial yet difficult. The EXPERT HardCeramic Tile-Cutting Disc uses Diamond Technology and a range of design features to deliver the best results consistently, even in the hardest ceramics. Bosch Diamond Technology, which brings new diamonds to the surface to ensure the rim is always sharp, allows our ceramic cutting disc to cut smoothly through even hard tiles. The thin, strong body and continuous fluted rim offer maximum control and keep vibration low for a high quality, chip-free cut. The Bosch …
 |
Specifications: Diameter - 115mm Bore diameter - 22.23mm Cutting width - 1.6mm Segment height - 10mm Field of Application: Building site material, concrete with rebar, brick and limestone.
 |
Excellent Lifetime - The X-LOCK X571 Best for Metal Flap Disc offers an excellent lifetime on metal applications. Its high-quality zirconia alumina/semi-fr
 |
A pack of ten inox metal cutting discs made from premium quality resin-bonded aluminium oxide. The discs are ultra-thin for rapid cutting and the reinforced fibreglass construction improves the streng more→th and performance of the disc. Suitable for fast cutting of stainless steel, steel, structural steel and sheet metal. Compatible with 115mm angle grinders with 22.23mm bore. Supplied as a set of ten discs in a storage tin.
Wire & Cup Brushes325
 |
Price from £8.49
Compare prices3→Compare prices and buy Lessmann Precision End Wire Brush Pointed End 12mm 6mm Shank LES451162
The Lessmann End Brushes are fitted with a 6mm shank for cleaning and de-burring in hard to reach areas. They are ideal for the removal of paint and the cleaning of moulds and castings. Also for worki more→ng on edges and recesses and the inside of bores etc.The Lessmann Pointed End Brush With Shank has the following specification: Wire Type: Steel.Diameter: 12mm.Wire Height: 20mm.Wire Gauge: 0.30.Max Speed: 20,000/rpm.Addi
 |
Price from £3.16 up to £4.22
Compare prices6→Compare prices and buy Draper Wire Cup Brush, 40mm
Brassed crimped steel wire with 6mm diameter shank. Display packed.
 |
Price from £3.00 up to £3.71
Compare prices7→Compare prices and buy Draper Flat Top Decarbonizing Wire Brush, 26m
Brassed crimped steel wire brush with flat trim. 6mm diameter shanks. Brush length 25mm. Display packed.
 |
Price from £8.95
Compare prices3→Compare prices and buy Faithfull Twisted Knot Wire Wheel Brush 115mm M14 Thread WBTC115
Faithfull Conical Knot Brush with high tensile steel wire. Ideal for work in hard-to-reach places such as edges or corners. Suitable for the removal of slag, rust, scale or even dried cement. Max. Cut more→ting Speed: 12,500 rpm.Type: Knot conical Diameter: 115 mm Thread: M14 x 2 Wire: 0.5 mm twist knot steel Conforms to ISO 9001. and DIN EN1083-1 and 2Additional Information:&bu
 |
Price from £13.44 up to £18.15
Compare prices6→Compare prices and buy Draper Twist Knot Wire Cup Brush, 100mm, M14
Manufactured from 0.5mm hardened steel wire. Designed for use with angle grinders. M14 thread. Carton packed.
 |
Price from £40.95
Compare prices3→Compare prices and buy Lessmann Crimped Stainless Steel Wire Cup Brush 80mm M14 x 2.0 Thread LES4
The Lessmann Cup Brushes are filled with crimped wire and are ideal for working on large surfaces. They can also be used for the removal of rust, paint, dirt or scale and for polishing. A range of siz more→es and wire styles are available.Diame
 |
Price from £3.34 up to £3.49
Compare prices5→Compare prices and buy Sealey Flat Top Decarbonising Brush 13mm
• Flat trimmed brush with brassed and crimped filaments for extra rigidity.• ø6 x 20mm Shaft.• Trim Length/ø: 20/13mm.Flat trimmed brush with brassed and crimped filaments for extra rigidity more→. ø6 x 20mm Shaft.• Flat trimmed brush with brassed and crimped filaments for extra rigidity. • ø6 x 20mm Shaft. • Trim Length/ø: 20/13mm. • Model No. VS1802Technical Specification:N
 |
Price from £25.14 up to £42.99
Compare prices6→Compare prices and buy Bosch 0.8mm Knotted Steel Wire Cup Brush 100mm M14 Thread 1608614002
Extra-Coarse Finish - The Heavy for Metal Wire Cup Brush provides an extra-coarse surface finish. This cup brush is fitted with knotted wire for heavy-duty cleaning applications. Ideal for use in meta more→l, it is suitable for cleaning work on medium to large steel surfaces, such as removing heavy rust, underseal, paint or varnish. It is intended for use with angle grinders with an M14 thread. Brush wires are available in different thicknesses for variable levels of abrasive needs. Thicker wires are more aggressive, producing a coarser yet faster surface finish, while thinner wires deliver finer, smoother surface results. Fits GGS 6 and GGS 8 straight grinders with M14 thread. Features and Benefits …
Important!
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
