Parkside PKGA 20-Li B1
Multi Tool Blades320
 |
Price from £6.95 up to £14.60
Compare prices4→Compare prices and buy Dremel 107 Engraving Tip 2.4mm Pack of 3
Quality cutters for detail engraving, carving, routing in wood, fiberglass, plastic and soft metals.SpecificationsShank diameter - 3.2 mmWorking diameter - 2.4 mmMaximum RPM: 35.000 1/minPack of 3
DeWALT DT20718 Fastcut Carbide OIS Oscillating Multi Tool Grout Removal Segment Blade 95mm Pack of 1
 |
Price from £20.99 up to £30.99
Compare prices8→Compare prices and buy DeWALT DT20718 Fastcut Carbide OIS Oscillating Multi Tool Grout Removal Segment Blade 95mm Pack of 1
The DEWALT Multi-Tool Fastcut Grout Removal Blade has a 'Quickwave' edge with a tough carbide grit to provide fast and effective grout removal. The blade is quick and easy to change and fits all commo more→n oscillating tools. Specifications: Blade length: 25mm.Blade diameter: 95mm.Blade thickness: 5mm.
 |
Price from £17.99 up to £22.95
Compare prices6→Compare prices and buy Bosch Expert AVZ 90 RT Starlock Oscillating Multi Tool Sanding Plate 90mm 60g Pack of 1 2608900049
Lasts up to 100x longer than standard sandpaper - Small but tough sanding jobs to remove old material and prepare surfaces for working can be almost impossible with conventional sanders or by hand. Ev more→en if you can reach the surface, these jobs destroy sandpaper. With the EXPERT Sanding Plate however, you can reach corners and sand difficult materials with your oscillating multitool. Using Bosch Carbide Technology, grits of the hardest metal are robustly fixed to the surface. This sharp grit remains fully effective over its long lifespan because you can clean it with a solvent. The EXPERT Sanding Plate is designed for multiple materials and users. The coarse, open grains of the RT2 (grit size …
 |
Price from £18.99 up to £20.95
Compare prices5→Compare prices and buy Dremel Max 117DM High Speed Mushroom Cutter 6.4mm Pack of 2 26150117DM
The heavy-duty Dremel Max 117DM Carving Bit is coated in Titanium Nitride to last 2 times longer than the standard, non-coated accessory. What can you do with it? Remove material with precision for ap more→plications like, carving, freehand routing, shaping and engraving in a wide range of materials. Ideal for your carving and engraving projects in wood, plastic and soft metals such as aluminium, copper and brass. How to use: Let the accessory and your Dremel Multi-Tool do the work without forcing or pushing too hard. For an effective result, use the sides of the accessory head at an angle less than 90 degrees. Do you feel the accessory is chattering more than removing material? Turn up the RPM to …
 |
Price from £11.95
Compare prices4→Compare prices and buy Fein Unperforated Starlock Oscillating Multi Tool Sanding Pad Pack of 2 63806129220
• Sanding pad set, unperforated&bu
 |
Price from £27.95
Compare prices4→Compare prices and buy Smart 8 Piece OIS Oscillating Set H8MAK
From the Smart Green (Trade) series, this eight piece accessory set for oscillating multi tools contains a selection of cutting accessories for tackling everyday jobs on the worksite. The blades are c more→ompatible with most professional grade oscillating multi tools, including the Fein Multimaster and models from DeWalt, Bosch and Makita. Whether it’s wood cutting, trimming or removing old timbers and needing to cut through wood/nails.. The H8MAK has all the accessories you need. PLEASE NOTE These accessories are not compatible with Fein 'Starlock' fittings. Specifications • Tool Fitting: Smart Quick Release Shank • Blade Width: 4x 32mm, 1x 44mm, 2x 63mm, 1x 90mm • Depth of Cut: 42…
 |
Price from £9.95
Compare prices4→Compare prices and buy Dremel 420 Heavy Duty Cut Off Wheel 24mm Pack of 20
For slicing and cutting in metal,wood and plastic. Cut-off wheels make it easy to cut or slot bolts, screws, sheet metal, thin wood and plastic. Fiberglass reinforced cut-off wheels (456, 426, 426B) a more→re for tough applications. The cut-off wheel cuts only along its edge. Do not attempt to sand or cut curved holes with them. Use Dremel cut-off wheels with mandrel 402.Specificati
 |
Price from £16.49 up to £19.95
Compare prices5→Compare prices and buy Dremel 7105 4.4mm Diamond Wheel Point 4.4mm Pack of 2
For fine detail work, cutting, engraving, carving, touch-up and finishing. Use on wood, jade, ceramic, glass, hardened steel, semi-precious stones and other hard materials. Bits are covered with diamo more→nd particles.Speci
 |
Price from £16.99 up to £17.95
Compare prices8→Compare prices and buy Bosch Dust Extraction Adaptor for GOP 300 SCE Oscillating Multi Tools
Extracting Sanding Dust - The dust extraction device is used for extracting sanding dust in combination with the sanding plate AVI 93 G. Features and Benefits • Extracting Sanding Dust in Combin more→ation with the Sanding Plate AVI 93 G • Dust extraction device is used for extracting sanding dust in combination with the sanding plate AVI 93 G. Specifications Height: 35mm
 |
Price from £5.95
Compare prices5→Compare prices and buy Stanley Hook and Loop Sanding Sheets for Oscillating Multi Tools Assorted Grit Pack of 10 STA32348
The assortment of grits – 40, 60, 80, and 120 – caters to different stages of your project. The 40 grit is ideal for heavy material removal and shaping, while the 60 and 80 grit sheets are perfect for more→smoothing surfaces and refining details. Transition to the 120 grit for a fine finish, ensuring your workpiece achieves a polished, professional look. Crafted with Stanley quality, these detail sander sheets are durable and reliable, ensuring longevity and consistent performance. The 93x93mm size makes them suitable for small, intricate projects where precision matters. Features & Benefits • High quality aluminium oxide grains for superior sanding • Durable paper backing ensures long life…
 |
Price from £48.26 up to £49.95
Compare prices5→Compare prices and buy Fein 6 Piece Starlock Plus Oscillating Multi Tool Wood and Metal Cutting Blade Set 35222967030
• Best of E-Cut StarlockPlus WOOD & METAL • 6 E-Cut plunge-cut saw blades for sawing in wood and metal. Suitable for all FEIN MultiTools and all other common MultiTools with Starlock-Plus an more→d StarlockMax mounting. Available as a set, offering significant savings over purchasing the items individually. Content: E-Cut long-life saw blades (2 each of 50 x 35 mm, 50 x 65 mm), E-Cut universal saw blade (1 each of 60 x 28 mm, 60 x 44 mm). Specifications Mount: SLP
 |
Price from £10.95
Compare prices4→Compare prices and buy Dremel 125 High Speed Cone Cutter 6.4mm Pack of 2
High speed cutters can be used for shaping, hollowing, grooving, slotting, making tappered holes in soft metals, plastics and woods.SpecificationsShank diameter - 3.2 mmWorking diameter - 6.4 mmPack of 2
Important!
Compatibility with specific models Multi Power Tools should be confirmed with the online store manager directly before purchase.
Compatibility with specific models Multi Power Tools should be confirmed with the online store manager directly before purchase.
