Sealey CP20VAGX
Cutting Discs336
 |
Designed for cutting metal with angle grinders, these Stanley cutting discs have a depressed centre so the cutting edge is offset from the nut - this allows for better access in tight spaces. Features more→& Benefits • Compatible with standard angle grinders • Depressed centre: prevents the nut from causing an obstruction and allows access in tight spaces Specifications • Disc Diameter: 115mm • Bore: 22mm • Thickness: 3mm • Pack Quantity: 1
 |
Cleaning disc 125x22,2 gr c basto. for steel, stainless steel and pvc standard.tyrolitSpecifications:- Weight: 0,0980 KG- Dimensions: 125x22,2 mm
 |
The Norton Clipper Classic Ceramic Diamond Blade provides a clean cut in most ceramic products, glazed tiles, etc. For use with angle grinders.
 |
Aluminium oxide flap disc for descaling, rust removal, weld preparation, weld cleaning and general surface preparation. Abrasive flaps are attached to rigid disc with epoxy adhesive - does not require more→backing pad. Depressed centre disc suitable for electric and air tools. Features & Benefits: • Aluminium oxide flap disc for descaling, rust removal, weld preparation, weld cleaning and general surface preparation. • Abrasive flaps are attached to rigid disc with epoxy adhesive - does not require backing pad. • Depressed centre disc suitable for electric and air tools. • Size/Bore: Ø115/22mm. • Model No. FD11580E Specifications: Model No FD11580E Bore: Ø22mm Brand: Sealey Disc Size: Ø115mm Grit:…
 |
The X-LOCK Expert for Metal Cutting Disc provides powerful cutting performance in metal with maximum safety. The disc is made of premium aluminium oxide with advanced phenol resin, which copes with de more→manding applications while delivering good results. Moreover, the disc's precision-manuf
 |
Up to 3x more precise than a standard ceramic diamond discThe tiles used in modern construction are often large, very hard and expensive. Cutting them to a high standard every time is therefore crucia more→l yet difficult. The Expert HardCeramic Tile-Cutting Disc uses Diamond Technology and a range of design features to deliver the best results consistently, even in the hardest ceramics.Bosch Diamond Technology, which brings new diamonds to the surface to ensure the rim is always sharp, allows our ceramic cutting disc to cut smoothly through even hard tiles. The thin, strong body and continuous fluted rim offer maximum control and keep vibration low for a high quality, chip-free cut.The Bosch Expert …
 |
These premium-quality resin-bonded zirconium oxide flap discs offer enhanced cutting performance and efficiency. It has a self-sharpening feature, which increases high stock removal and durability. Th more→e strong X-weight polyester-cotto
 |
The X551 Expert for Metal has an impressive material removal rate on metal surfaces. The zirconia alumina and semi-friable aluminium oxide abrasive grit blend delivers a brilliant removal rate and lif more→etime on metal applications. Furthermore, its highly robust X-cloth with stable backing ensures durability and steady performances on tough surfaces. The grit is bonded using fully synthetic resin on X-cloth for optimal sanding behaviour. It is intended for deburring and welding preparation on carbon steel, mild steel, aluminium, non-ferrous metals and cast iron. It is also ideal for removing discolouration, stock and surface imperfections. It is available in angled or straight options on fibreglass …
Wire & Cup Brushes203
 |
Price from £6.49
Compare prices3→Compare prices and buy Lessmann 0.35 Steel Wire DIY Cup Brush 50mm 6mm Shank LES43012307
The Lessmann DIY Cup Brush is fitted with 6mm shank. It has been designed for working on large surfaces, generally for the removal of rust, paint, dirt or scale, and for polishing. 430.123.07: Wire: 0 more→.35 Steel, Diameter: 50mm.430.133.07
 |
Price from £12.95
Compare prices3→Compare prices and buy Lessmann Precision End Wire Brush Pointed End 23mm 6mm Shank LES453162
The Lessmann End Brushes are fitted with a 6mm shank for cleaning and de-burring in hard to reach areas. They are ideal for the removal of paint and the cleaning of moulds and castings. Also for worki more→ng on edges and recesses and the inside of bores etc.The Lessmann Pointed End Brush With Shank has the following specification: Wire Type: SteelDiameter: 23mmWire Height: 25mmWire Gauge: 0.30Max Speed: 18,000/rpmAddit
 |
Price from £3.95
Compare prices3→Compare prices and buy Faithfull Point End Crimped Wire Brush 23mm 6mm Shank WBSI23P
This Faithfull Wire End Brush is suitable for cleaning paint or deburring moulds or castings in hard-to-reach areas such as cylinders. The brush has crimped steel wire and is designed for light to med more→ium-duty applications. Suitable for use in industrial power tools at higher speeds. Suitable for cleaning paint or deburring of moulds or castings in hard-to-reach areas such as cylinders. Can be used in industrial power tools at higher speeds. Type: Pointed end Face diameter: 23/60 mm x 25 mm Shaft: 6 mm (1/4in) Wire: 0.3 mm steel Conforms to ISO 9001. and DIN EN1083-1 and 2 Maximum rpm 20,000.Addition
 |
Price from £6.05 up to £6.49
Compare prices4→Compare prices and buy Draper 3 Piece Crimped Wire Brush Set WBSET3
This set of wire brushes is designed for light to medium-duty work and delivers rapid stock removal from a wide variety of surfaces. The brushes are made from hardened dipped brassed steel wire, which more→gives a high level of durability and resistance to oxidation. The brushes are strong enough to provide reliable performance, and the crimping is flexible to tackle recessed areas and irregular surfaces. The set includes a 25mm wire end brush, 50mm wire cup brush, and a 50mm wire wheel brush. Fitted with a non-slip 6.35mm hex shank. Compatible with most drill drivers and drills with a 13mm chuck. Conforms to EN1083-1 and EN1083-2Content
 |
Price from £5.49
Compare prices3→Compare prices and buy Lessmann Precision End Wire Brush 60mm 12mm 6mm Shank LES451161
The Lessmann End Brushes are fitted with a 6mm shank for cleaning and de-burring in hard to reach areas. They are ideal for the removal of paint and the cleaning of moulds and castings. Also for worki more→ng on edges and recesses and the inside of bores etc.The Lessmann End Brush With Shank has the following specification: Wire Type: Steel.Diameter: 12mmWire Height: 20mmOverall Length: 60mmWire Gauge: 0.30.Max Speed: 20,000/rpm.Addi
 |
Price from £4.00 up to £5.79
Compare prices5→Compare prices and buy Draper Spiral Wire Brush 28mm 6mm Shank 41436
This wire tube brush is designed for cleaning tubes, gratings, sleeves and cylinders made from ferrous metals. The bristles are made from hardened steel wire, which gives a high level of durability an more→d performance. The brush is strong enough to provide reliable performance, and the crimping is flexible to tackle recessed areas and irregular surfaces. Fitted with a 6mm twisted shank. Compatible with most drill drivers and drills with a 13mm chuck. Contents: 1 x Steel Crimped Tube Brush, 28mm Specifications: Diameter: 28mm Connection: 6mm Twisted shank Material: Steel Style: Crimped Wire length: 11mm Wire diameter: 0.3mm Maximum speed: 1,400rpm Weight (net): 26g
 |
Price from £16.99
Compare prices2→Compare prices and buy Bosch Professional Heavy Inox 75x0.5x125 Mm M14 Brush Cup Silver 260862206
Heavy for Inox Wire Cup Brush provides an extra-coarse surface finish. Brush wires are available in different thicknesses for variable levels of abrasive needs. Thicker wires are more aggressive, prod more→ucing a coarser yet faster surface finish, while thinner wires deliver finer, smoother surface results. It is intended for use with angle grinders with an M14 thread.Features
 |
Price from £3.97 up to £4.49
Compare prices5→Compare prices and buy Bosch 0.3mm Crimped Steel Wire Brush 50mm 6mm Shank 2608622006
The Wire Cup Brush delivers an excellent, fine-surface finish. It features crimped wire for light-to-medium
Important!
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
