Sealey SA09
Cutting Discs110
 |
Lasts up to 50x longer than a Bi-Metal blade in tough material - Plumbers, renovators and demolition workers alike know that cutting steel pipe and profiles is a tough task, even with a powerful recip more→saw. Medium-thick metal can vibrate badly during cutting. The EXPERT ‘Medium-Thick Tough Metal’ not only cuts these metals efficiently and with minimum vibration, it also offers exceptional lifespan. Extreme durability is built into the blade with Bosch Carbide Technology. The Bosch EXPERT ‘Medium-Thick Tough Metal’ Reciprocating Saw Blade is our medium thickness steel specialist – its carbide teeth have a finer pitch than its thick metal counterpart. This means that individual teeth don’t catc…
 |
These Ozito PXCSB circular saw blades are suitable for the Ozito PXCSS 18v cordless circular saw as well as other 150mm circular saws with a 10mm bore. They are available in two different tooth config more→urations and are suitable for cutting wood. Specifications • Blade Diameter: 150mm • Blade Bore: 10mm • Teeth: 18 Features & Benefits • Wood cutting circular saw blade • Appropriate for handheld circular saws including the Ozito PXCSS • Tungsten carbide teeth • 150mm (6") Diameter
 |
Lasts up to 50x longer than a Bi-Metal blade in tough material - The sheer abrasiveness of cement fibre board means it is one of the toughest materials for your recip saw blade. For installers, plumbe more→rs, electricians and any tradesmen involved in maintenance and restoration, however, cutting these boards is essential. The EXPERT ‘Fiber Plaster’ is designed to cut fibre plaster boards effectively over a long lifetime. Its extreme durability comes courtesy of Bosch Carbide Technology, integrating the hardest metal into an advanced tooth design. The relatively short, pointed blade gives good control and access to tight spaces: it is designed with productivity in mind. The Bosch EXPERT ‘Fiber Plaste…
 |
The Faithfull TCT Cordless Trimsaw Blade has Tungsten Carbide Tips and a narrow 1.6mm kerf for improved battery performance and laser cut expansion slots to reduce heat build-up. The blade is specia more→lly designed for use with hand-held cordless saws and this range includes blades for fast cutting and fine finishing on all types of timber and man-made boards.This Faithfull TCT Cordless Trimsaw Blade has the folowing specification: Application: Fast RipBlade Diameter: 150mmBore: 10mmTeeth: 24Rake: POSPTDFAIZ15024
 |
IRWIN Metal & Wood Cutting Sabre Saw Blades. Superior construction and design make them faster cutting and longer lasting. Labelling on the blade makes it easy to identify the right blade for the righ more→t application. Suitable for cutting materials which are 3.2mm (1/8in) and thicker. Such as plastic, wood, carbon steel and stainless steel.
 |
Milwaukee S744D Wood and Plastic Saw Blades. 3x faster aggressive triple sharpened tooth geometry for speed and splinter free cuts. Teeth are hardened and triple sharpened for a super sharp splinter f more→ree clean cut. 1.6 mm thick blade resists bending, reduces vibration and blate flattering at speed. Specifications • Blade Length: 150mm • Teeth per Inch: 6 • Max. Cutting Capacity (PVC): 6-50mm • Max. Cutting Capacity (Wood): 6-50mm • Pack Quantity: 3 Features and Benefits • 3x faster aggressive triple sharpened tooth geometry for speed and splinter free cuts • Teeth are hardened and triple sharpened for a super sharp splinter free clean cut • 1.6 mm thick …
 |
These Faithfull Wood Cutting Sabre Saw Blades are made from HCS carbon steel blades making them specially adapted for wood working in terms of hardness and resistance. They are also highly suitable fo more→r other relatively soft materials. Manufactured for precision and stability when cutting. Their design and tooth geometry vary with regard to the speed and cutting application which they are intended to perform. Selecting the correct sabresaw blade for the task at hand is essential if the material is to be cut successfully and the desired result achieved. Will fit Sabresaws from the following brands: AEG Black & Decker Bosch DeWalt Elu Fein Hitachi Makita Metabo Milwaukee Ryobi and most …
 |
Multimaterial Circular DiscSpecifications:- Suitable For Materials: Wood- Blade Diameter : 15 Cm- Thickness: 1.4 Mm- Bore Size: 2 Cm- Number Of Teeth: 36- Cutting Width: 2.4 Mm- Cutting Result: 3
Abrasive Wheels & Belts2129
 |
6.12Buy!
£
£
Idealo.co.uk
Delivery: in United Kingdom
Report
Sanding Sheet / Wood / Grit 180 / Quantity 10 Piece
 |
The Makita A24 depressed centre grinding disc is perfect for grinding steel and dressing welds. Specifications • Diameter: 115mm • Bore: 22.2mm • Thickness: 6mm • Pack Quantity: 1
 |
For use in very narrow and deep places, in channels, grooves, openings and folds. Also in mould-making, on concave forms and in convex forms. Plastic carrier plate for preventing damage and marks on t more→he workpiece.Featu
 |
Replacement rubber backing pad for Makita random orbital sanders. Compatible with the Following Makita Machines • BO5010 • BO5012 • BO5021 • BO5031 • BO5041 Specifications &bu more→ll; Diameter: 123mm • Pack Quantity: 1
 |
19.42Buy!
£
£
Idealo.co.uk
Delivery: in United Kingdom
Report
Sandpaper / Varnish / Grit 100 / Disc Diameter 125 mm
 |
If you like to take care of every detail in your home and own the latest products that will make your life easier, purchase.Cuttin
 |
Makita 122793-0 dust bag assembly for DKP180, KP0800 and KP0810 planers. Makita planer dust bag helps create a dust free environment whilst on the job. Features and Benefits • Compatible with mod more→els DKP180, KP0800 and KP0810 • Cleaner cut and less dust • Helps create a dust free environment whilst on the job Specifications • Part Number: 122793-0 • Model: DKP180 / KP0800 / KP0810 • Pack Quantity: 1
 |
Excellent Finish - The F355 Best for Coatings and Composites produces an excellent finish when keying and sanding abrasives as well as composite surfaces. Its high-quality silicone carbide grit-coated more→sheets remove material with precision for professional finishes. Furthermore, its electrostatic open-coated surface with space between the grit ensures consistent dust removal, preventing sheet clogging. This product is intended for sanding hard minerals, stone and composite materials as well as sanding between coats of varnish. Moreover, it is ideal for keying and sanding down varnishes and paint, primer, filler and plastics. It is also suitable for precision work on ferrous and non-ferrous materials.&hell
Important!
Compatibility with specific models Grinders & Polishers should be confirmed with the online store manager directly before purchase.
Compatibility with specific models Grinders & Polishers should be confirmed with the online store manager directly before purchase.
